ERJT08J624V Panasonic Resistor (Resistor Chip) In Stock

Panasonic ERJT08J624V is a 1206 thick film surface mount resistor with 620kΩ resistance, ±5% tolerance, 0.33W power rating, and ±200ppm/°C temperature coefficient. REACH compliant rectangular SMT chip for high-impedance biasing and voltage divider circuits. From $0.01, in stock with worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJT08J624VResistor Chip
Quick Facts
Manufacturer
Panasonic
Package
Resistor Chip
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0270(MOQ 50)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJT08J624V?

  • 620kΩ high-resistance thick film chip resistor with ±5% tolerance for high-impedance biasing networks
  • 0.33W power rating in 1206 (3.2mm x 1.6mm x 0.6mm) SMT package for moderate power handling
  • ±200ppm/°C temperature coefficient enabling stable resistance in high-impedance sensor interface designs
  • REACH compliant with JESD-609 e3 lead-free construction for EU and global regulatory compliance
  • Standard 1206 footprint compatible with automated SMT reel-feed assembly across all major pick-and-place platforms

What is ERJT08J624V used for?

The ERJT08J624V is commonly used in high-impedance voltage divider networks, op-amp feedback resistor pairs, and discharge paths for capacitors in power management circuits. Its 620kΩ resistance value suits ADC input attenuation networks, battery voltage sensing dividers, and low-leakage pull-down resistors in sleep-mode microcontroller designs. The 1206 SMT package provides reliable automated assembly across consumer electronics, industrial sensing, and IoT device platforms.

What are the specifications of ERJT08J624V?

Reach Compliance CodeCompliant
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.6mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.33W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance620000Ω
Resistor TypeFIXED RESISTOR
Size Code1206
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient200ppm/°C
Terminal FinishTin (Sn)
Terminal ShapeWRAPAROUND
Tolerance5%
Working Voltage200V
PackageResistor Chip

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJT08J624V datasheet?

ERJT08J624V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJT08J624V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What voltage divider ratio does the ERJT08J624V achieve when paired with a 180kΩ lower resistor from a 12V rail?

With ERJT08J624V (620kΩ) as the upper resistor and 180kΩ as the lower, the divider produces 2.7V from a 12V input, suitable for ADC reference scaling. The total divider current is only 15µA, minimizing power consumption in battery-operated monitoring circuits measuring 12V battery state in IoT sensor nodes.

How does the 620kΩ resistance of the ERJT08J624V limit its use in high-frequency AC circuits?

At 620kΩ, the resistor becomes strongly reactive above approximately 250Hz when combined with typical PCB parasitic capacitances of 1pF to 2pF, forming an RC cutoff around this frequency. This limits its use to DC biasing, very low-frequency signal conditioning, and discharge networks rather than audio or RF signal paths above 1kHz.

Which alternative SMT resistors share the 620kΩ ±5% 0.33W 1206 footprint of the ERJT08J624V?

The Yageo RC1206JR-07620KL, Vishay CRCW1206620KJNEA, and Bourns CR1206-JW-624ELF all share the 1206 package with 620kΩ ±5% 0.33W ±200ppm/°C specifications. All three measure 3.2mm x 1.6mm, making them direct drop-in replacements for the ERJT08J624V without PCB or BOM changes.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0270
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
50+$0.0300$1.50
1000+$0.0270$27.00
pcs
Unit price: $0.0300 · Total: $1.50

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK