ERJT08J513V Panasonic Resistor (Resistor Chip) In Stock

Panasonic ERJT08J513V is a thick-film SMD resistor in 1206 case with 51 kΩ resistance, ±5% tolerance, 0.33 W power rating, and ±200 ppm/°C temperature coefficient. Robust 3.2×1.6×0.6 mm body supports bias and pull-up functions in industrial and consumer electronics. Available from stock with worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJT08J513VResistor Chip
Quick Facts
Manufacturer
Panasonic
Package
Resistor Chip
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0270(MOQ 50)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJT08J513V?

  • 51 kΩ resistance with ±5% tolerance for bias, pull-up, and voltage-divider networks
  • 0.33 W power rating in 1206 case offering greater thermal headroom than 0805 resistors
  • ±200 ppm/°C temperature coefficient for stable resistance across industrial operating ranges
  • Thick-film rectangular SMT construction compatible with automated reflow processes
  • RoHS-compliant (JESD-609 e3) meeting global environmental standards
  • 1206 package with 3.2 mm length for easier manual inspection and rework access

What is ERJT08J513V used for?

The ERJT08J513V serves as a pull-up resistor on open-drain digital output lines and as a bias resistor in transistor and MOSFET gate-driver circuits, where its 51 kΩ value limits quiescent current while maintaining valid logic levels at 3.3 V and 5 V supply rails. It is also applied in voltage-divider networks for ADC input scaling and in op-amp feedback loops within signal-conditioning circuits, where the 1206 package's 0.33 W rating and stable ±200 ppm/°C TCR ensure reliable long-term operation across industrial temperature ranges.

What are the specifications of ERJT08J513V?

Reach Compliance CodeCompliant
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.6mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.33W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance51000Ω
Resistor TypeFIXED RESISTOR
Size Code1206
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient200ppm/°C
Terminal FinishTin (Sn)
Terminal ShapeWRAPAROUND
Tolerance5%
Working Voltage200V
PackageResistor Chip

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJT08J513V datasheet?

ERJT08J513V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJT08J513V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How does the ERJT08J513V's 0.33 W power rating benefit high-impedance pull-up applications in industrial equipment?

At 51 kΩ connected to a 24 V industrial supply, the ERJT08J513V dissipates approximately 11 mW, well below its 0.33 W continuous rating. This large safety margin allows the 1206 resistor to operate without derating even at elevated PCB temperatures, making it reliable in industrial control and automation panels where ambient conditions can exceed 70°C.

Can the ERJT08J513V be used as the upper resistor in a voltage-divider to scale a 12 V rail down to an ADC-compatible level?

Yes. Pairing the ERJT08J513V (51 kΩ upper resistor) with a 33 kΩ lower resistor divides a 12 V input down to approximately 4.7 V, which can directly interface with a 5 V ADC input. The combined 84 kΩ network draws only ~143 µA from the 12 V rail, keeping quiescent power loss well below 2 mW.

How does the ±200 ppm/°C TCR of the ERJT08J513V affect a voltage-divider ratio over a -40°C to +85°C industrial range?

Over a 125°C temperature span, the ±200 ppm/°C coefficient can shift the 51 kΩ resistance by up to ±1.275 kΩ (±2.5%). If both resistors in a voltage-divider share the same TCR, the ratio error partially cancels. When using mismatched resistors, designers should budget up to ±2.5% ratio error from TCR alone when assessing ADC accuracy over the full industrial temperature range.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0270
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
50+$0.0300$1.50
1000+$0.0270$27.00
pcs
Unit price: $0.0300 · Total: $1.50

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK