ERJT08J242V Panasonic Resistor (Resistor Chip) In Stock

Panasonic ERJT08J242V is a thick film surface mount resistor in 1206 case with 2.4 kΩ resistance, ±5% tolerance, and 0.33 W power rating. Features ±200 ppm/°C temperature coefficient and 0.6 mm package height. Available from stock with worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJT08J242VResistor Chip
Quick Facts
Manufacturer
Panasonic
Package
Resistor Chip
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0225(MOQ 1)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJT08J242V?

  • 2.4 kΩ resistance with ±5% tolerance for versatile signal and power circuit use
  • 0.33 W power rating in standard 1206 (3.2 mm × 1.6 mm) SMT package
  • ±200 ppm/°C temperature coefficient ensures stable resistance over wide temperature ranges
  • REACH and RoHS compliant with Pb-free JESD-609 e3 classification
  • Compact 0.6 mm height suits low-profile automated SMT assembly processes

What is ERJT08J242V used for?

The ERJT08J242V is used in voltage divider networks, pull-up resistor arrays, and impedance setting circuits in industrial electronics, telecommunications equipment, and consumer devices. Its 2.4 kΩ resistance and 0.33 W rating make it suitable for current limiting in LED drive circuits, base resistors in transistor switching stages, and biasing networks in analog amplifier designs. This 1206-size resistor supports high-volume automated assembly and is commonly specified in power management and signal conditioning boards.

What are the specifications of ERJT08J242V?

Reach Compliance CodeCompliant
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.6mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.33W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance2400Ω
Resistor TypeFIXED RESISTOR
Size Code1206
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient200ppm/°C
Terminal FinishTin (Sn)
Terminal ShapeWRAPAROUND
Tolerance5%
Working Voltage200V
PackageResistor Chip

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJT08J242V datasheet?

ERJT08J242V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJT08J242V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How does the ±200 ppm/°C temperature coefficient of the ERJT08J242V affect circuit stability across temperature?

With a ±200 ppm/°C temperature coefficient, the ERJT08J242V resistance shifts by at most 0.02% per degree Celsius. Over a 50 °C temperature range, the 2.4 kΩ nominal value drifts by up to 24 Ω, which is acceptable for general-purpose voltage dividers and pull-up resistors but should be considered in precision analog designs.

What current can the ERJT08J242V carry continuously without exceeding its power rating?

The ERJT08J242V handles up to 0.33 W continuous dissipation in its 1206 package. At 2.4 kΩ, the maximum safe continuous current is approximately 11.7 mA (I = √(P/R)), making it suitable for signal-level current limiting, LED series resistors, and transistor base drive circuits operating at logic-level voltages of 3.3 V to 5 V.

When is the ERJT08J242V preferred over 0603 or 0402 resistors for mid-power circuit applications?

The ERJT08J242V in 1206 package (3.2 mm × 1.6 mm) handles 0.33 W, which is approximately 2 to 3 times the power rating of 0603 equivalents. Designers choose it when dissipating more than 0.1 W continuously, such as in LED current limiting from 5 V rails, transistor bias networks, or termination resistors in moderate-impedance signal lines.

What compliance certifications does the ERJT08J242V hold for global supply chain qualification?

The ERJT08J242V is REACH compliant and carries a Pb-free JESD-609 e3 solder classification, meeting global environmental regulations for lead-free soldering processes. Its 1206 package with 3.2 mm length and 0.6 mm height supports both standard reflow and wave soldering on multilayer PCBs, and YTEOL 12 indicates a 12-year end-of-life support period.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0225
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$0.1680$0.17
50+$0.0300$1.50
1000+$0.0270$27.00
3000+$0.0225$67.50
pcs
Unit price: $0.1680 · Total: $0.17

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK