ERJT08J223V Panasonic Resistor (Resistor Chip) In Stock

Panasonic ERJT08J223V is a thick film surface mount resistor in 1206 case with 22kΩ resistance, ±5% tolerance, 0.33W power rating, and ±200ppm/°C temperature coefficient. Available from authorized distributors with fast worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJT08J223VResistor Chip
Quick Facts
Manufacturer
Panasonic
Package
Resistor Chip
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0270(MOQ 50)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJT08J223V?

  • 22kΩ resistance with ±5% tolerance in 1206 package for general-purpose analog and digital circuits
  • 0.33W power rating with ±200 ppm/°C TCR for reliable performance across temperature ranges
  • Thick film construction in 3.2 mm × 1.6 mm 1206 package for easy PCB assembly
  • REACH compliant and RoHS-ready for international environmental compliance
  • Suitable for pull-up, feedback, and filtering networks across 3.3V to 24V supply ranges

What is ERJT08J223V used for?

The ERJT08J223V is widely used in pull-up resistor arrays, feedback networks for op-amp circuits, and voltage dividers in consumer electronics and industrial control boards. Its 22kΩ resistance is a commonly required value for I2C pull-up configurations, ADC input conditioning, and MOSFET gate biasing circuits. The 1206 package and 0.33W power rating make it suitable for applications requiring higher power dissipation and easier hand-soldering than smaller 0402 or 0603 alternatives.

What are the specifications of ERJT08J223V?

Reach Compliance CodeCompliant
Factory Lead Time22Weeks
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.6mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.33W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance22000Ω
Resistor TypeFIXED RESISTOR
Size Code1206
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient200ppm/°C
Terminal FinishTin (Sn)
Terminal ShapeWRAPAROUND
Tolerance5%
Working Voltage200V
PackageResistor Chip

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJT08J223V datasheet?

ERJT08J223V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJT08J223V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How does the ERJT08J223V's 22kΩ resistance function in I2C bus pull-up configurations?

In I2C circuits, 22kΩ pull-up resistors control bus rise time and idle voltage. While the I2C standard typically recommends values between 1kΩ and 10kΩ for standard 100 kHz or 400 kHz modes, a 22kΩ pull-up may suit very low-speed or low-power I2C buses where reducing leakage current consumption on 3.3V rails is prioritized over maximum bus speed.

What is the power dissipated by the ERJT08J223V when used as a pull-up on a 24V industrial control bus?

When connected as a pull-up on a 24V bus with the line pulled low, the power dissipated in the 22kΩ ERJT08J223V is approximately 26.2 mW (P = V² / R = 576 / 22000). This is well within the 0.33W rating of the 1206 package, confirming this resistor safely handles 24V industrial I/O pull-up applications.

For high-impedance sensor interfaces, what advantage does 22kΩ offer compared to 10kΩ pull-up resistors?

A 22kΩ pull-up draws roughly half the leakage current compared to a 10kΩ resistor on the same supply rail, reducing quiescent power consumption in battery-operated sensor nodes. For a 3.3V rail, a 22kΩ pull-up dissipates only 0.5 mW in the idle state versus 1.1 mW for 10kΩ, extending battery life in IoT and wearable applications where standby power budgets are below 1 mW.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0270
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
50+$0.0300$1.50
1000+$0.0270$27.00
pcs
Unit price: $0.0300 · Total: $1.50

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK