ERJT08J222V Panasonic Resistor (Resistor Chip) In Stock

Panasonic ERJT08J222V is a thick film surface mount resistor with 2.2kΩ ±5% resistance and 0.33W power rating in a 1206 SMD package. Features ±200ppm/°C TCR and REACH compliant construction. Available from stock with worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJT08J222VResistor Chip
Quick Facts
Manufacturer
Panasonic
Package
Resistor Chip
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0237(MOQ 50)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJT08J222V?

  • 2.2kΩ resistance with ±5% tolerance in Panasonic ERJT08 thick film 1206 series
  • 0.33W power dissipation rating, higher than 0805 resistors, for moderate-power circuit applications
  • 1206 SMT package: 3.2 mm length × 0.6 mm height balancing compactness and thermal handling
  • Temperature coefficient of ±200 ppm/°C for stable resistance over typical industrial operating temperatures
  • REACH compliant with JESD-609 e3 moisture sensitivity rating for global supply chain compliance

What is ERJT08J222V used for?

The ERJT08J222V 2.2kΩ resistor is commonly used in current sensing, biasing networks, and RC filter circuits within consumer electronics, industrial automation, and embedded systems. Its 0.33W power rating in the 1206 package makes it suitable for applications that exceed the thermal limits of 0805 components while maintaining a compact SMT footprint. Engineers also use it in voltage divider networks, pull-up configurations for open-drain signals, and gate resistors in low-frequency switching circuits.

What are the specifications of ERJT08J222V?

Reach Compliance CodeCompliant
Factory Lead Time22Weeks
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.6mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.33W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance2200Ω
Resistor TypeFIXED RESISTOR
Size Code1206
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient200ppm/°C
Terminal FinishTin (Sn)
Terminal ShapeWRAPAROUND
Tolerance5%
Working Voltage200V
PackageResistor Chip

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJT08J222V datasheet?

ERJT08J222V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJT08J222V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

Why choose a 1206 package for the ERJT08J222V over an 0805 resistor of the same value?

The 1206 package of the ERJT08J222V supports 0.33W continuous dissipation, compared to 0.25W for 0805. In a 12V circuit with 2.2kΩ, power dissipation reaches approximately 65 mW — safely within 0.33W but exceeding some 0805 derating curves at elevated ambient temperatures.

How does the ERJT08J222V perform in an RC low-pass filter at audio frequencies?

Paired with a 33 nF capacitor, the ERJT08J222V forms an RC low-pass filter with a -3dB cutoff frequency of approximately 2.2 kHz, suitable for anti-aliasing before ADC inputs in audio and sensor signal chains operating at 3.3V or 5V rails.

What drift should I expect from the ERJT08J222V over an industrial temperature range?

With a ±200 ppm/°C TCR, the ERJT08J222V resistance shifts by about ±1.6% across an 80°C industrial range from -40°C to +85°C. For gain-critical op-amp circuits this may be marginal, but it is fully adequate for pull-up, filtering, and current-limit resistor applications.

What lead time should procurement plan for the ERJT08J222V during volume production?

The factory lead time is approximately 22 weeks for the ERJT08J222V. Production planners should place blanket orders or confirm distributor consignment inventory 5 to 6 months ahead of assembly ramp to avoid shortages of this 2.2kΩ 1206 resistor.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0237
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
50+$0.0300$1.50
1000+$0.0270$27.00
20000+$0.0266$532.00
100000+$0.0237$2370.00
pcs
Unit price: $0.0300 · Total: $1.50

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK