ERJT08J10RV Panasonic Resistor (Resistor Chip) In Stock

Panasonic ERJT08J10RV is a thick film SMD resistor in 1206 package with 10 Ohm resistance, 5% tolerance, 0.33 W power rating, and 200 ppm/°C temperature coefficient. Available from stock worldwide with fast shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJT08J10RVResistor Chip
Quick Facts
Manufacturer
Panasonic
Package
Resistor Chip
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0430(MOQ 5)
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJT08J10RV?

  • 10 Ohm resistance with ±5% tolerance in a 1206 surface-mount package
  • 0.33 W power rating supporting currents up to approximately 182 mA
  • ±200 ppm/°C temperature coefficient for stable performance over temperature
  • Reliable thick film construction for general-purpose PCB circuits
  • RoHS-compliant Panasonic ERJT08 series resistor

What is ERJT08J10RV used for?

The ERJT08J10RV is commonly used in series termination, inrush current limiting, and EMI damping circuits in consumer and industrial electronics. Its low 10 Ohm value and 0.33 W rating make it suitable for power supply output filtering and motor driver protection resistors. This part also serves in USB and Ethernet differential pair termination where precise low-value impedance matching is needed.

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)

Where can I find the ERJT08J10RV datasheet?

ERJT08J10RV Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJT08J10RV?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What maximum current can the ERJT08J10RV handle given its 0.33 W rating?

At 10 Ohm and 0.33 W maximum power dissipation, the ERJT08J10RV can sustain up to approximately 182 mA continuously. Exceeding this current would push power above the 0.33 W rating, risking thermal damage, so designers should apply a derating factor of 50% in high-temperature environments.

How does a 10 Ohm 1206 resistor improve EMI performance in high-speed signal lines?

Placing the ERJT08J10RV as a series resistor on a high-speed signal trace adds controlled impedance to dampen ringing caused by transmission line mismatch. The 10 Ohm value helps absorb reflections without significantly attenuating signals, and the 1206 package provides a stable, low-inductance mount for frequencies up to hundreds of MHz.

Is the ERJT08J10RV suitable for USB data line series termination in embedded designs?

Yes. USB full-speed and high-speed designs commonly use 22 Ohm to 33 Ohm series resistors, but for custom impedance tuning, a 10 Ohm resistor like the ERJT08J10RV can fine-tune line impedance. Its ±5% tolerance and 1206 package support compact board layouts with straightforward reflow assembly.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0430
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
5+$0.0500$0.25
25+$0.0460$1.15
50+$0.0430$2.15
pcs
Unit price: $0.0500 · Total: $0.25

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK