ERJT06J752V Panasonic Resistor (Resistor Chip) In Stock

Panasonic ERJT06 anti-pulse thick film SMD resistor in 0805 case rated 7.5kΩ ±5% and 0.25W. Features ±200ppm/°C TCR, RoHS-compliant Pb-free termination, and surge-tolerant construction for demanding signal circuits. From $0.03 in stock with worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJT06J752VResistor Chip
Quick Facts
Manufacturer
Panasonic
Package
Resistor Chip
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0360(MOQ 50)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJT06J752V?

  • Anti-pulse thick film design withstands repetitive voltage spikes without permanent resistance shift
  • 0805 package (2 mm × 1.25 mm × 0.6 mm) supports high-density SMT assembly
  • 7.5kΩ ±5% suits feedback dividers, bias resistor networks, and analog input filtering
  • ±200ppm/°C TCR delivers predictable resistance over -55°C to +125°C temperature range
  • RoHS-compliant Pb-free construction per JESD-609 e3 for green and automotive supply chains

What is ERJT06J752V used for?

The ERJT06J752V serves voltage divider and bias resistor roles in analog front-end circuits for industrial sensors and microcontroller ADC inputs, where the 7.5kΩ value provides appropriate scaling with low self-heating at 0.25W. It is placed as a pull-up resistor on I2C or open-drain bus lines operating at 3.3V to 5V, where bus capacitance and rise-time requirements favour values in the 4.7kΩ to 10kΩ range. Consumer electronics and HVAC control boards also use it in RC filter networks for noise suppression on analog signal lines.

What are the specifications of ERJT06J752V?

Pbfree CodeYes
Reach Compliance CodeCompliant
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.25mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.25W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance7500Ω
Resistor TypeFIXED RESISTOR
Size Code0805
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient200ppm/°C
Terminal FinishMATTE TIN OVER NICKEL
Terminal ShapeWRAPAROUND
Tolerance5%
Working Voltage150V
PackageResistor Chip

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJT06J752V datasheet?

ERJT06J752V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJT06J752V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

For an I2C pull-up on a 3.3V bus, how does ERJT06J752V's 7.5kΩ value affect bus rise time and power?

A 7.5kΩ pull-up on a 3.3V I2C bus with a typical 100pF bus capacitance gives a rise-time constant of approximately 750 ns, suitable for Standard-mode 100kHz I2C. The steady-state current when the bus is pulled low is about 0.44 mA, dissipating only 1.5 mW per resistor—far below the 0.25W rated maximum—so thermal derating is not a concern even at +85°C ambient.

How does ERJT06J752V's anti-pulse rating benefit a sensor interface with frequent ESD events?

When an ESD strike couples through a cable into a 7.5kΩ series protection resistor, the peak instantaneous power can reach 50× the rated 0.25W for nanosecond durations. The anti-pulse thick film construction of ERJT06J752V absorbs these pulses repeatedly without resistance shift exceeding 1%, maintaining signal accuracy in industrial field-wiring environments where standard resistors may degrade within a few dozen ESD events.

Is ERJT06J752V a good fit for an RC low-pass filter at 7.5kΩ paired with a 10nF capacitor?

Yes. With ERJT06J752V at 7.5kΩ and a 10nF capacitor, the single-pole filter corner frequency is approximately 2.1 kHz, suitable for anti-aliasing before a low-speed ADC sampling at 5kSps or below. The ±5% tolerance and ±200ppm/°C TCR translate to a corner frequency accuracy of about ±5% at room temperature, which is acceptable for most analog signal conditioning applications without trimming.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0360
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
50+$0.0400$2.00
250+$0.0380$9.50
500+$0.0360$18.00
pcs
Unit price: $0.0400 · Total: $2.00

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK