ERJT06J224V Panasonic Resistor (Resistor Chip) In Stock

Panasonic ERJT06J224V is a thick-film surface-mount chip resistor with 220 kΩ resistance, ±5% tolerance, 0.25 W power rating, and ±200 ppm/°C TCR in an 0805 package. Available from stock with worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJT06J224VResistor Chip
Quick Facts
Manufacturer
Panasonic
Package
Resistor Chip
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0270(MOQ 50)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJT06J224V?

  • 220 kΩ high-resistance value with ±5% tolerance for bias and voltage-divider networks
  • 0.25 W power rating in a compact 0805 (2012 metric) surface-mount footprint
  • ±200 ppm/°C temperature coefficient for controlled resistance drift over operating temperatures
  • Thick-film rectangular construction for consistent electrical and mechanical performance
  • RoHS and REACH compliant, supporting lead-free and environmentally regulated manufacturing

What is ERJT06J224V used for?

The ERJT06J224V is commonly used in high-impedance voltage-divider chains, pull-up or pull-down networks for microcontroller I/O lines, and input protection resistors in analog front-end circuits where a 220 kΩ value at 0.25 W is needed. Its 0805 package offers a practical balance between small board area and ease of hand soldering, making it suitable for both prototype and volume production. It is widely found in consumer electronics, telecommunications equipment, and industrial sensor interfaces.

What are the specifications of ERJT06J224V?

Pbfree CodeYes
Reach Compliance CodeCompliant
Factory Lead Time18Weeks
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.25mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.25W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance220000Ω
Resistor TypeFIXED RESISTOR
Size Code0805
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient200ppm/°C
Terminal FinishMATTE TIN OVER NICKEL
Terminal ShapeWRAPAROUND
Tolerance5%
Working Voltage150V
PackageResistor Chip

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJT06J224V datasheet?

ERJT06J224V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJT06J224V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What continuous voltage can the ERJT06J224V handle without exceeding its 0.25 W power rating?

At 0.25 W and 220 kΩ, the maximum continuous DC voltage across the ERJT06J224V is approximately 235 V (V = √(P×R) = √(0.25 × 220,000)). However, the maximum working voltage for an 0805 thick-film resistor is typically capped at 150 V by the package, so the voltage rating rather than the power rating is usually the binding constraint.

How does the ±5% tolerance of the ERJT06J224V affect gain accuracy in a two-resistor voltage divider?

In a voltage divider using two ±5% resistors, worst-case tolerance stacking can shift the output ratio by up to ±10% from its nominal value. For a divider built with the ERJT06J224V at 220 kΩ, the actual resistance may range from 209 kΩ to 231 kΩ, which must be budgeted in the system error analysis alongside op-amp input offset and temperature drift from the ±200 ppm/°C TCR.

When is the ERJT06J224V a better fit than a 0402 resistor of the same 220 kΩ value?

The ERJT06J224V in the 0805 package is preferable when the 0402 package's 0.063 W power limit is insufficient, or when hand-assembly and rework are required since the 2 mm × 1.25 mm 0805 body is far easier to manipulate with tweezers than the 1 mm × 0.5 mm 0402 footprint. The 0805 also provides better mechanical solder joint strength in applications subject to board flexure or vibration.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0270
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
50+$0.0300$1.50
250+$0.0280$7.00
500+$0.0270$13.50
pcs
Unit price: $0.0300 · Total: $1.50

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK