ERJT06J103V Panasonic Resistor (Resistor Chip) In Stock

Panasonic ERJT06J103V is a thick film surface mount resistor with 10kΩ resistance, ±5% tolerance, 0.25W power rating, and ±200ppm/°C temperature coefficient in an 0805 package. From $0.01 in stock worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJT06J103VResistor Chip
Quick Facts
Manufacturer
Panasonic
Package
Resistor Chip
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0250(MOQ 1)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJT06J103V?

  • 10kΩ ±5% thick film resistor in 0805 (2.0×1.25mm) SMD package rated at 0.25W for general-purpose use
  • ±200ppm/°C temperature coefficient providing stable resistance in standard operating temperature ranges
  • RoHS and Reach compliant with Pb-free JESD-609 e3 certification suitable for consumer and industrial products

What is ERJT06J103V used for?

The ERJT06J103V is one of the most widely used resistor values in electronics, serving as a pull-up or pull-down resistor for CMOS logic, GPIO lines, and open-drain communication buses like I2C and one-wire protocols. Its 10kΩ value is standard for NTC thermistor divider networks in temperature sensing circuits and as a base resistor in general-purpose transistor switching designs.

What are the specifications of ERJT06J103V?

Pbfree CodeYes
Reach Compliance CodeCompliant
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.25mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.25W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance10000Ω
Resistor TypeFIXED RESISTOR
Size Code0805
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient200ppm/°C
Terminal FinishMATTE TIN OVER NICKEL
Terminal ShapeWRAPAROUND
Tolerance5%
Working Voltage150V
PackageResistor Chip

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJT06J103V datasheet?

ERJT06J103V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJT06J103V?

Compatible alternatives and drop-in replacements for ERJT06J103V:

Frequently Asked Questions

Why is 10kΩ the most common pull-up resistor value, and how does ERJT06J103V fit GPIO designs?

The 10kΩ value balances leakage current and signal rise time for CMOS GPIO inputs, drawing only 0.33 mA at 3.3 V while keeping rise times fast enough for standard I/O speeds up to 1 MHz. The ERJT06J103V's ±5% tolerance and 0.25W rating are more than adequate for pull-up applications in microcontroller GPIO designs at 3.3 V or 5 V logic levels.

How many ERJT06J103V resistors are needed for NTC thermistor voltage divider circuits in HVAC systems?

Each NTC thermistor temperature channel requires 1 pull-up resistor in a voltage divider configuration; a 4-zone HVAC control system with 4 temperature sensors needs 4 units of ERJT06J103V. The 10kΩ value matches standard NTC thermistor nominal resistance at 25°C, maximizing ADC sensitivity across the -40°C to +85°C measurement range.

For a compact wearable sensor PCB, how does the 0805 package of ERJT06J103V compare to 0402?

The 0805 package of ERJT06J103V measures 2.0 mm × 1.25 mm × 0.6 mm, approximately 4 times the footprint of 0402 (1.0×0.5mm). While 0402 saves space in ultra-compact wearables, the 0805 allows hand soldering and rework with standard iron tips, making ERJT06J103V preferred during prototyping and low-volume assembly where 0402 placement accuracy is challenging.

How does ERJT06J103V's ±200ppm/°C coefficient affect accuracy in a 10-bit ADC voltage divider?

Over a 50°C range, the ±200ppm/°C coefficient produces at most 1% resistance change, which shifts the ADC midpoint by approximately 25 mV on a 5V reference. For a 10-bit ADC with 4.88 mV per LSB, this introduces up to 5 LSB error at extremes. For higher accuracy requirements, the ±1% ±100ppm/°C ERJP14F series is recommended over the ERJT06J103V.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0250
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$0.3600$0.36
104+$0.3510$36.50
310+$0.1080$33.48
3705+$0.0720$266.76
5000+$0.0350$175.00
10000+$0.0250$250.00
pcs
Unit price: $0.3600 · Total: $0.36

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK