ERJP14J910U Panasonic Resistor (Other) In Stock

Panasonic ERJP14J910U is a thick-film surface-mount resistor in 1210 case with 91Ω resistance, ±5% tolerance, and 0.5W power rating. Key specs: 91Ω, ±5% tolerance, ±200ppm/°C TCR, 0.5W, 1210 SMD package, Pb-free. Available from stock worldwide with fast shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJP14J910UOther
Quick Facts
Manufacturer
Panasonic
Package
Other
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0400(MOQ 250)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJP14J910U?

  • 91Ω resistance at ±5% tolerance in cost-effective J-series for general-purpose SMD applications
  • 0.5W power rating in 1210 case allows greater dissipation than 0805 or 0603 resistors of the same value
  • TCR of ±200ppm/°C suitable for non-precision current-limiting and pull-up functions
  • Pb-free and RoHS/REACH-compliant for global market requirements

What is ERJP14J910U used for?

The ERJP14J910U is used in current-limiting, pull-up, and termination networks where a 91Ω ±5% resistor at 0.5W is adequate and tight tolerance is not required. Its 1210 footprint supports industrial control panels, lighting driver circuits, and general consumer electronics where cost efficiency matters. The ±200ppm/°C TCR is acceptable for non-precision signal termination over -55°C to +155°C operating conditions.

What are the specifications of ERJP14J910U?

Pbfree CodeYes
Reach Compliance CodeCompliant
Factory Lead Time22Weeks
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width2.5mm
Packing MethodTR, EMBOSSED, 7 INCH
Rated Power Dissipation (P)0.5W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance91Ω
Resistor TypeFIXED RESISTOR
Size Code1210
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient200ppm/°C
Terminal FinishMATTE TIN OVER NICKEL
Terminal ShapeWRAPAROUND
Tolerance5%
Working Voltage200V
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJP14J910U datasheet?

ERJP14J910U Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJP14J910U?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How much current can ERJP14J910U continuously sink at 91Ω without exceeding its power rating?

The ERJP14J910U is rated at 0.5W, so the maximum continuous current through 91Ω is approximately 74mA (I = √(P/R) = √(0.5/91) ≈ 0.074A). At 5V supply, the resistor draws only 55mA and dissipates 0.27W — safely within the 0.5W limit with a 46% derating margin.

When is the ±5% tolerance of ERJP14J910U adequate and when should the designer switch to a ±1% part?

The ±5% ERJP14J910U suits non-critical functions such as inrush current limiting, LED series resistors at 91Ω, and general pull-up networks where the exact value is unimportant. For precision voltage dividers, ADC reference networks, or gain-setting resistors requiring better than ±2% system accuracy, switch to the ERJP14F series with ±1% tolerance and ±100ppm/°C TCR.

Does ERJP14J910U carry RoHS and REACH compliance for export to the EU and UK markets?

Yes, the ERJP14J910U is coded Pb-free, REACH-compliant, and JESD-609 e3 compatible, satisfying both EU RoHS Directive 2011/65/EU and UK REACH regulations. These certifications are documented in Panasonic's ERJP14 series datasheet and can be referenced during CE marking declarations for finished products.

How does ERJP14J910U compare to ERJP14F910U for a termination resistor on a 5V logic bus?

For a 5V logic bus termination at 91Ω, the ERJP14J910U (±5%, ±200ppm/°C) and ERJP14F910U (±1%, ±100ppm/°C) both work electrically. The J-series part is typically lower cost, while the F-series offers better impedance matching accuracy — relevant only when the bus operates above 10 MHz, where ±5% impedance mismatch would increase signal reflections.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0400
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
250+$0.0400$10.00
pcs
Unit price: $0.0400 · Total: $10.00

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK