ERJP14J6R8V Panasonic Resistor (Other) In Stock

Panasonic ERJP14J6R8V is a thick film surface mount resistor in 1210 case with 6.8 Ω resistance, ±5% tolerance, 0.5 W power rating, and temperature coefficient of -100 to +600 ppm/°C. RoHS compliant and available worldwide from stock.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJP14J6R8VOther
Quick Facts
Manufacturer
Panasonic
Package
Other
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0850(MOQ 125)
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJP14J6R8V?

  • 6.8 Ω low-value resistance with ±5% tolerance in 1210 (3225 metric) surface mount package rated at 0.5 W
  • Wide temperature coefficient range of -100 to +600 ppm/°C suitable for general industrial and consumer applications
  • Thick film rectangular construction ensuring reliable automated soldering and long operational life

What is ERJP14J6R8V used for?

The ERJP14J6R8V is designed for current sensing, snubber networks, and low-resistance load applications in power electronics and motor control boards. Its 6.8 Ω value and 0.5 W dissipation rating make it well-suited for inrush current limiting, gate resistor applications, and feedback networks in switching power supplies.

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)

Where can I find the ERJP14J6R8V datasheet?

ERJP14J6R8V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJP14J6R8V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How much current can ERJP14J6R8V carry continuously without exceeding its 0.5 W rating?

At 6.8 Ω and a 0.5 W rating, the maximum continuous current is approximately 271 mA (calculated as sqrt(P/R) = sqrt(0.5/6.8)). Designers should stay below this limit and apply standard derating of 50% in high-temperature environments.

In which 1210 package applications does ERJP14J6R8V outperform smaller 0805 resistors?

The ERJP14J6R8V in 1210 (3.2 mm × 2.5 mm) offers a 0.5 W power rating, significantly higher than the 0.125 W typical of 0805 resistors. For gate drive circuits or snubber networks where power dissipation exceeds 0.25 W, this 1210 resistor provides the necessary thermal headroom.

Can ERJP14J6R8V be used as a gate resistor in MOSFET switching circuits?

Yes, the 6.8 Ω value is commonly used as a MOSFET gate resistor to control switching speed and suppress oscillations. At typical gate drive currents of 1 A to 3 A in short bursts, the 0.5 W average dissipation rating is adequate for PWM frequencies from 20 kHz to 100 kHz.

What temperature coefficient range does ERJP14J6R8V specify and how does it affect precision circuits?

The ERJP14J6R8V specifies a temperature coefficient of -100 to +600 ppm/°C, which is moderately wide. Over a 100°C temperature range, this can shift resistance by up to 6%, making it unsuitable for precision analog measurement circuits but acceptable for switching and power dissipation applications.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0850
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
125+$0.1090$13.63
250+$0.0970$24.25
500+$0.0850$42.50
pcs
Unit price: $0.1090 · Total: $13.63

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK