ERJP14J4R3V Panasonic Resistor (Other) In Stock

Panasonic ERJP14J4R3V is a thick film SMD resistor in 1210 case with 4.3 Ω resistance, ±5% tolerance, and 0.5 W power rating. Temperature coefficient spans -100 to +600 ppm/°C. Available from stock with worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJP14J4R3VOther
Quick Facts
Manufacturer
Panasonic
Package
Other
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0850(MOQ 125)
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJP14J4R3V?

  • 4.3 Ω resistance in 1210 SMD package (3.2 mm × 2.5 mm) offering 0.5 W power dissipation
  • ±5% tolerance suitable for general-purpose load, biasing, and protection resistor applications
  • -100 to +600 ppm/°C TCR provides adequate thermal stability for commercial-grade designs
  • Pb-free JESD-609 e3 RoHS-compliant construction for international regulatory compliance

What is ERJP14J4R3V used for?

The ERJP14J4R3V is designed for current limiting, pull-down biasing, and resistive load applications in consumer electronics and industrial control systems operating at up to 0.5 W. The 4.3 Ω resistance value suits motor speed control snubber networks, LED driver protection circuits, and relay coil discharge paths where low resistance is needed with moderate power handling. Its 1210 SMD format enables high-density automated board assembly with standard reflow soldering.

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)

Where can I find the ERJP14J4R3V datasheet?

ERJP14J4R3V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJP14J4R3V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How does the 0.5 W power rating of ERJP14J4R3V compare to ERJP08J4R3V for the same 4.3 Ω resistance?

The ERJP14J4R3V in the 1210 package (3.2 mm × 2.5 mm) is rated at 0.5 W, which is slightly lower than the ERJP08J4R3V in 1206 package at 0.66 W, both sharing the same 4.3 Ω resistance value. The 1210 package is physically wider but optimized differently by Panasonic for this series. For higher current applications requiring maximum thermal headroom at 4.3 Ω, the ERJP08 variant at 0.66 W is preferable.

What steady-state current can flow through ERJP14J4R3V without exceeding its 0.5 W power limit?

The ERJP14J4R3V can sustain a continuous current of approximately 341 mA before reaching its 0.5 W power limit (calculated as √(0.5 W / 4.3 Ω) ≈ 0.341 A). This makes it appropriate for medium-current circuit protection in 5 V or 12 V DC systems, such as fuse resistors in battery management boards, motor current sensing, and indicator LED current control where moderate currents flow.

In what temperature range does ERJP14J4R3V maintain acceptable resistance stability for industrial designs?

With a -100 to +600 ppm/°C TCR, the ERJP14J4R3V maintains adequate resistance stability across the -55 °C to +155 °C range typical of industrial applications. Over a 100 °C temperature swing, the worst-case resistance shift is about 0.26 Ω on the 4.3 Ω nominal, equating to roughly 6% drift. For circuits tolerant of ±5% part variation this is acceptable, and the Panasonic ERJP14 series is commonly used in industrial control panels, motor drives, and energy metering equipment.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0850
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
125+$0.1090$13.63
250+$0.0970$24.25
500+$0.0850$42.50
pcs
Unit price: $0.1090 · Total: $13.63

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK