ERJP14J1R3V Panasonic Resistor (Other) In Stock

Panasonic ERJP14J1R3V is a thick film surface mount resistor in 1210 case with ultra-low 1.3Ω resistance, ±5% tolerance, 0.5W power rating, and -100 to +600ppm/°C temperature coefficient. Available in stock with worldwide shipping for high-current and power electronics designs.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJP14J1R3VOther
Quick Facts
Manufacturer
Panasonic
Package
Other
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0850(MOQ 125)
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJP14J1R3V?

  • Ultra-low 1.3Ω resistance enabling high-current sensing and power path applications in 1210 SMT format
  • 0.5W continuous power dissipation rating supporting up to 620mA current flow through the low resistance path
  • -100 to +600ppm/°C temperature coefficient accommodating general-purpose low-ohmic resistor requirements
  • Thick film construction in 1210 package compatible with standard automated SMT assembly processes

What is ERJP14J1R3V used for?

The ERJP14J1R3V ultra-low resistance resistor is commonly used in overcurrent protection circuits, inrush current limiters, and motor drive current sensing networks where accurate low-impedance shunt monitoring is needed. Its 0.5W rating in the 1210 package handles the significant power dissipation inherent in high-current low-resistance applications found in battery management systems and DC-DC converters. The component also serves as a source degeneration resistor in power MOSFET circuits to improve current sharing and reduce oscillation in paralleled switch configurations.

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)

Where can I find the ERJP14J1R3V datasheet?

ERJP14J1R3V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJP14J1R3V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How much current can flow continuously through ERJP14J1R3V without exceeding its power rating?

At 0.5W with 1.3Ω resistance, the ERJP14J1R3V supports approximately 620mA of continuous current calculated from I=sqrt(P/R). This high current capability in an SMT package makes the 1210 form factor suitable for motor current sensing, battery charging circuits, and power distribution paths where moderate currents and low resistance drop are design requirements.

For which battery management system designs is a 1.3Ω SMT shunt resistor most appropriate?

The ERJP14J1R3V 1.3Ω resistor suits battery management systems monitoring cell currents up to 500mA, producing a sense voltage of 650mV at full scale that is easily measured by a 12-bit ADC with a 1V reference. For higher-current applications above 1A, lower shunt resistances would be preferred to reduce power loss, but the 1210 package provides adequate thermal capacity for typical Li-ion cell monitoring up to 600mA charge or discharge rates.

How does the ±5% tolerance affect current measurement precision in a 1.3Ω shunt circuit?

With ±5% tolerance, the 1.3Ω shunt resistance varies from 1.235Ω to 1.365Ω, introducing up to ±5% error in current calculated from V/R. For applications requiring better than ±5% current accuracy, upgrading to a ±1% tolerance shunt at 1.3Ω in the same 1210 package reduces measurement uncertainty to ±1.3%, which is often sufficient for battery fuel gauge applications and motor protection circuits where tight current thresholds matter.

Why is the 1210 package preferred over 0805 for a 1.3Ω 0.5W resistor in power designs?

The 1210 package with its 3.2mm length provides greater contact area and copper thermal path for heat dissipation compared to 0805 at equivalent power. At 620mA through 1.3Ω, the ERJP14J1R3V dissipates the full 0.5W, and the larger 1210 footprint spreads that thermal energy more effectively into PCB copper planes. The 0805 package would typically be limited to 0.25W at similar resistances, making 1210 the better choice for high-current low-resistance shunts.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0850
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
125+$0.1090$13.63
250+$0.0970$24.25
500+$0.0850$42.50
pcs
Unit price: $0.1090 · Total: $13.63

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK