ERJP14F8202U Panasonic Resistor (Other) In Stock

Panasonic ERJP14F8202U is an 82 kOhm thick film surface mount resistor in 1210 package with ±1% tolerance, 0.5W power rating, and ±100 ppm/°C TCR. RoHS compliant, available from stock worldwide.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJP14F8202UOther
Quick Facts
Manufacturer
Panasonic
Package
Other
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0660(MOQ 10)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJP14F8202U?

  • 82 kΩ precision resistor with ±1% tolerance for accurate high-impedance voltage dividers and biasing networks
  • 0.5W continuous power rating in 1210 SMD package (3.2 mm × 1.6 mm) suitable for compact high-side sensing circuits
  • Low ±100 ppm/°C TCR limits resistance change to within ±1.25% across a -40°C to 85°C industrial temperature range

What is ERJP14F8202U used for?

The ERJP14F8202U 82 kOhm resistor is used in high-impedance input biasing networks for op-amp stages, voltage reference dividers in battery management systems, and gate pull-down resistors in MOSFET driver circuits. Its ±1% tolerance and 0.5W rating make it suitable for feedback and timing networks in oscillator circuits and precision analog front-end designs. The 1210 package supports automated SMT assembly in energy metering, medical device electronics, and industrial sensor conditioning boards.

What are the specifications of ERJP14F8202U?

Pbfree CodeYes
Reach Compliance CodeCompliant
Factory Lead Time22Weeks
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width2.5mm
Packing MethodTR, EMBOSSED, 7 INCH
Rated Power Dissipation (P)0.5W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance82000Ω
Resistor TypeFIXED RESISTOR
Size Code1210
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient100ppm/°C
Terminal FinishTin (Sn) - with Nickel (Ni) barrier
Terminal ShapeWRAPAROUND
Tolerance1%
Working Voltage200V
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJP14F8202U datasheet?

ERJP14F8202U Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJP14F8202U?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What is the maximum voltage that can appear across ERJP14F8202U before its 0.5W power limit is reached?

The maximum voltage is V = sqrt(P × R) = sqrt(0.5 × 82,000) ≈ 202 V for the 0.5W power limit on the 82 kOhm ERJP14F8202U. In practice the component's rated working voltage in the Panasonic ERJP14 datasheet—typically 200 V for 1210-size resistors—governs the actual limit. Always choose the lower of the two values and derate for temperatures above 70°C per the published derating curve.

How suitable is ERJP14F8202U for the high-side resistor in a resistive voltage divider measuring a 48 V bus on a battery management board?

At 48 V across 82 kOhm, the dissipation is only 48² / 82,000 ≈ 28 mW, well below the 500 mW rating of the ERJP14F8202U. The ±1% initial tolerance and ±100 ppm/°C TCR keep the divider ratio accurate to within ±1.5% over a 0°C to 70°C range, making this part an excellent fit for 48 V BMS voltage sensing where 1% measurement precision is required.

What lead time should procurement teams expect for ERJP14F8202U, and are alternatives available for shorter delivery?

Panasonic quotes approximately 22 weeks factory lead time for ERJP14F8202U during normal demand cycles. Engineers sourcing against tight schedules should check distributor stock for immediate delivery; 82 kOhm 1210 ±1% resistors from YAGEO (RC1210FR-0782KL) or Vishay (CRCW121082K0FKEA) offer equivalent 0.5W, ±100 ppm/°C specifications and are typically available from distribution within 1 to 5 business days.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0660
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
10+$0.0700$0.70
20+$0.0680$1.36
30+$0.0660$1.98
pcs
Unit price: $0.0700 · Total: $0.70

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK