ERJP14F5602U Panasonic Resistor (Other) In Stock
Panasonic ERJP14F5602U is an anti-surge thick film surface mount resistor in 1210 case with 56kΩ resistance, ±1% tolerance, and 0.5W power rating, designed to withstand transient voltage spikes in industrial and consumer electronics. Its ±100ppm/°C temperature coefficient ensures stable resistance over wide temperature ranges. Available RoHS-compliant from authorized distributors with worldwide shipping.
- Manufacturer
- Panasonic
- Package
- Other
- Pin Count
- 2
- Lifecycle
- ACTIVE
- Datasheet
- ERJP14F5602U Datasheet PDF
- Category
- Resistor
- Price
- From $0.1230(MOQ 5)
- Temp Range
- -55.0°C to 155.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Anti-surge thick film construction in 1210 package rated for high-energy transient voltage spikes, protecting downstream circuits in industrial power applications
- 56kΩ ±1% resistance with ±100ppm/°C TCR for precision pull-up, voltage divider, and bias networks requiring stable high-impedance performance
- 0.5W power rating with RoHS Pb-free JESD-609 e3 compliance for reliable halogen-free assembly in global industrial and consumer electronics production
Applications
The ERJP14F5602U is designed for anti-surge protection roles in industrial power supply input stages, motor drive gate circuits, and surge-prone environments where resistors must absorb high-energy transients without catastrophic failure. Its 56kΩ value and 0.5W rating make it appropriate for pull-up networks on communication buses, voltage sensing dividers in power management ICs, and filter networks in analog signal chains. Consumer electronics including HVAC control boards, smart meters, and industrial sensors leverage this resistor for combined surge robustness and precision resistance performance.
Specifications
| Pbfree Code | Yes |
| Reach Compliance Code | Compliant |
| Factory Lead Time | 22Weeks |
| YTEOL | 12 |
| Construction | Rectangular |
| JESD-609 Code | e3 |
| Mounting Feature | SURFACE MOUNT |
| Package Height | 0.6mm |
| Package Length | 3.2mm |
| Package Shape | RECTANGULAR PACKAGE |
| Package Style | SMT |
| Package Width | 2.5mm |
| Packing Method | TR, EMBOSSED, 7 INCH |
| Rated Power Dissipation (P) | 0.5W |
| Rated Temperature | 70°C |
| Reference Standard | AEC-Q200, IEC60115-8 |
| Resistance | 56000Ω |
| Resistor Type | FIXED RESISTOR |
| Size Code | 1210 |
| Surface Mount | YES |
| Technology | METAL GLAZE/THICK FILM |
| Temperature Coefficient | 100ppm/°C |
| Terminal Finish | Tin (Sn) - with Nickel (Ni) barrier |
| Terminal Shape | WRAPAROUND |
| Tolerance | 1% |
| Working Voltage | 200V |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8533.21.00.30 |
| Country of Origin | Japan |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What distinguishes the anti-surge construction of ERJP14F5602U from a standard 56kΩ thick film resistor?
The anti-surge construction of the ERJP14F5602U incorporates a specially formulated thick film resistive element and termination structure designed to absorb high-energy transient pulses without open-circuit failure. Standard thick film 56kΩ resistors may fail under pulses exceeding 1kV at microsecond durations, while the ERJP14 anti-surge series is engineered to withstand repetitive surge events in industrial environments where voltage spikes of several hundred volts on supply rails are common.
What current flows through ERJP14F5602U at its 0.5W continuous power limit for 56kΩ resistance?
At the 0.5W power limit with 56kΩ resistance, the current through the ERJP14F5602U is approximately 2.99mA, calculated as the square root of (0.5W / 56kΩ), corresponding to a voltage of approximately 167V across the resistor. In practical 3.3V to 24V supply rail applications, power dissipation is well below 0.5W, providing substantial derating margin and ensuring maximum long-term reliability in the 1210 package.
How does ERJP14F5602U perform as a pull-up resistor on a 5V logic bus compared to a standard 56kΩ thick film device?
On a 5V logic bus with a 56kΩ pull-up, the ERJP14F5602U draws approximately 89µA of quiescent current, creating a weak pull-up that is acceptable for low-speed I2C or open-collector signal lines. Its ±1% tolerance ensures the pull-up voltage remains within 49.7mV of the nominal high level at no-load, matching datasheet specifications for most logic families rated at VIH above 3V. The anti-surge benefit is relevant if the bus is exposed to ESD or inductive transients from relay coils or motor connections adjacent to the signal lines.
Is ERJP14F5602U stocked in tape-and-reel format for automated SMT assembly and what is the typical lead time?
Yes, the ERJP14F5602U is available in tape-and-reel packaging for automated surface mount assembly, standard for the 1210 (3.2mm × 1.6mm) footprint used in pick-and-place machines. The Panasonic factory lead time for ERJP14 series resistors is 22 weeks from order to delivery for production quantities, so procurement teams should plan buffer stock for uninterrupted supply. Spot quantities may be available through distributor buffer stock for faster delivery in prototype and low-volume production scenarios.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About Panasonic
Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 5+ | $0.1400 | $0.70 |
| 25+ | $0.1290 | $3.23 |
| 50+ | $0.1230 | $6.15 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”