ERJP14F2201U Panasonic Resistor (Other) In Stock

Panasonic ERJP14F2201U is a 2.2 kOhm thick film surface mount resistor in 1210 package with ±1% tolerance, 0.5W power rating, and ±100 ppm/°C TCR. RoHS compliant, worldwide availability.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJP14F2201UOther
Quick Facts
Manufacturer
Panasonic
Package
Other
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0529(MOQ 5000)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJP14F2201U?

  • 2.2 kΩ precision thick film resistor with tight ±1% tolerance for accurate voltage dividers and feedback networks
  • 0.5W rated power in the 1210 package (3.2 mm × 1.6 mm), offering higher current capacity than smaller 0402 or 0603 sizes
  • Low ±100 ppm/°C TCR ensures resistance drift stays within ±0.55% across a -40°C to 95°C industrial temperature span

What is ERJP14F2201U used for?

The ERJP14F2201U is used in precision voltage divider circuits for ADC reference scaling, op-amp gain-setting networks, and feedback resistors in DC-DC converter control loops where stable 2.2 kOhm resistance is critical. Its 0.5W rating and ±1% tolerance make it a reliable choice for bias networks in RF amplifier stages and current sensing resistor arrays in industrial power monitoring equipment. The 1210 SMD form factor supports high-speed automated reflow assembly in telecommunications, industrial automation, and test instrumentation designs.

What are the specifications of ERJP14F2201U?

Pbfree CodeYes
Reach Compliance CodeCompliant
Factory Lead Time22Weeks
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width2.5mm
Packing MethodTR, EMBOSSED, 7 INCH
Rated Power Dissipation (P)0.5W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance2200Ω
Resistor TypeFIXED RESISTOR
Size Code1210
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient100ppm/°C
Terminal FinishTin (Sn) - with Nickel (Ni) barrier
Terminal ShapeWRAPAROUND
Tolerance1%
Working Voltage200V
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJP14F2201U datasheet?

ERJP14F2201U Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJP14F2201U?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How much resistance drift should be budgeted for ERJP14F2201U in a -40°C to 125°C automotive-grade design?

With a ±100 ppm/°C TCR over a 165°C span from -40°C to 125°C, the drift budget is ±100 × 165 = ±16,500 ppm or ±1.65% of nominal. For a 2.2 kOhm resistor that equates to up to ±36.3 Ohm of thermally induced variation, which adds to the initial ±1% (±22 Ohm) tolerance. Designers targeting sub-1% system accuracy at temperature should select lower-TCR thin film alternatives.

What is the maximum DC voltage that can be safely applied across the ERJP14F2201U continuously?

The power limit of 0.5W at 2.2 kOhm gives a current limit of sqrt(0.5/2200) ≈ 15.1 mA and a voltage limit of sqrt(0.5 × 2200) ≈ 33.2 V. The component's rated working voltage, listed in the Panasonic ERJP14 datasheet, must also be checked; the lower of the two calculated and rated values governs continuous operation. For circuits above 50 V, verify the overload voltage spec as well.

When should an engineer choose ERJP14F2201U over a thin film resistor of the same value for a gain-setting network?

The ERJP14F2201U thick film resistor at ±1% tolerance and ±100 ppm/°C TCR suits gain-setting networks where 1% gain accuracy is acceptable and cost is a priority. For amplifier designs requiring better than 0.1% gain accuracy or TCR below 25 ppm/°C across a wide temperature range, a thin film resistor in the same 1210 footprint is preferred. In volume production where resistor cost is significant, thick film parts like ERJP14F2201U typically offer 30% to 50% lower unit price compared to thin film alternatives at the same resistance value.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0529
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
5000+$0.0800$400.00
10000+$0.0740$740.00
25000+$0.0563$1407.50
35000+$0.0545$1907.50
50000+$0.0529$2645.00
pcs
Unit price: $0.0800 · Total: $400.00

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK