ERJP08J3R3V Panasonic Resistor (Other) In Stock

Panasonic ERJP08J3R3V is a thick film surface mount resistor with 3.3 Ω resistance, ±5% tolerance, and 0.66 W power rating in a 1206 case. It features -100 to +600 ppm/°C temperature coefficient and RoHS-compliant construction. Available in stock with worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJP08J3R3VOther
Quick Facts
Manufacturer
Panasonic
Package
Other
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0196(MOQ 10)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJP08J3R3V?

  • 3.3 Ω low-resistance value with ±5% tolerance for current sensing and bypass applications in power circuits
  • 0.66 W power rating in 1206 package (3.2 mm × 1.6 mm) enabling robust heat dissipation in high-current signal paths
  • -100 to +600 ppm/°C temperature coefficient providing predictable resistance behavior across wide temperature excursions
  • RoHS compliant with JESD-609 e3 halogen-free designation for environmentally regulated markets
  • Thick film rectangular construction with surface mount 0.6 mm height for automated pick-and-place PCB assembly

What is ERJP08J3R3V used for?

The ERJP08J3R3V is suited for current-limiting, inrush current protection, and low-value bypass resistor applications in power conversion circuits, motor driver boards, and LED driver modules operating up to several amps. Its 3.3 Ω value at 0.66 W allows operation at up to approximately 450 mA continuous current before exceeding the rated power. The component also serves in snubber networks and soft-start circuits where a small series resistance damps switching transients across a broad temperature range.

What are the specifications of ERJP08J3R3V?

Pbfree CodeYes
Reach Compliance CodeCompliant
YTEOL11
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.6mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.66W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance3.3Ω
Resistor TypeFIXED RESISTOR
Size Code1206
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient-100,600 ppm/°C
Terminal FinishMATTE TIN OVER NICKEL
Terminal ShapeWRAPAROUND
Tolerance5%
Working Voltage500V
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJP08J3R3V datasheet?

ERJP08J3R3V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJP08J3R3V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How much continuous current can the ERJP08J3R3V safely handle at its rated power?

At 3.3 Ω and 0.66 W rating, the ERJP08J3R3V safely handles up to approximately 447 mA continuous current (derived from I = sqrt(P/R) = sqrt(0.66/3.3)). In motor driver or LED driver circuits where current peaks briefly exceed this, designers should derate to around 70% of rated power, limiting continuous current to roughly 315 mA for reliable long-term operation.

What does the asymmetric -100 to +600 ppm/°C temperature coefficient mean for circuit design?

The asymmetric -100 to +600 ppm/°C range means the 3.3 Ω ERJP08J3R3V resistance can increase by up to 600 ppm per degree above 25°C, reaching as much as 5.3 Ω at 155°C in the worst case. Engineers using this part in precision current sensing must account for this upward drift, while the -100 ppm/°C downward limit at cold temperatures keeps resistance close to nominal down to -55°C.

When would a designer choose the 1206 ERJP08J3R3V over an 0805 3.3 Ω resistor?

The 1206 package at 3.2 mm × 1.6 mm provides 0.66 W rated power, roughly 65% more than a typical 0805 0.4 W resistor. For a 3.3 Ω sense resistor in a 300 mA to 400 mA path, the 1206 stays well within its thermal limit whereas an 0805 would be operating near its derating threshold. The 1206 is preferred whenever operating conditions push power dissipation above 0.4 W consistently.

Is the ERJP08J3R3V suitable for use as a current sensing resistor in a 5 V motor driver circuit?

Yes, the ERJP08J3R3V works as a current sensing resistor in 5 V motor drivers drawing up to 400 mA. At 3.3 Ω and 400 mA, it develops a 1.32 V sense voltage — well within the ADC input range of most microcontrollers — while dissipating 0.528 W, safely below the 0.66 W rating. However, for 12 V systems drawing higher currents, a lower resistance sense resistor (0.1 Ω to 0.5 Ω) is typically preferred to reduce power loss.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0196
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
10+$0.0570$0.57
50+$0.0500$2.50
100+$0.0420$4.20
1000+$0.0330$33.00
10000+$0.0240$240.00
15000+$0.0196$294.00
pcs
Unit price: $0.0570 · Total: $0.57

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK