ERJP08J331V Panasonic Resistor (Other) In Stock

Panasonic ERJP08J331V is a thick-film surface-mount resistor in 1206 case with 330Ω resistance, ±5% tolerance, and 0.66W power rating. Key specs: 330Ω, ±5% tolerance, ±200ppm/°C TCR, 0.66W, 1206 SMD package, Pb-free. Available from stock worldwide with fast shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJP08J331VOther
Quick Facts
Manufacturer
Panasonic
Package
Other
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0147(MOQ 1)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJP08J331V?

  • 330Ω at ±5% tolerance in cost-efficient J-series for general-purpose current-limiting and pull-up use
  • 0.66W dissipation in 1206 case provides greater power headroom than 0805 resistors of the same value
  • TCR of ±200ppm/°C adequate for non-precision LED series resistors and logic pull-up networks
  • Pb-free JESD-609 e3 and RoHS-compliant for broad market applicability

What is ERJP08J331V used for?

The ERJP08J331V is widely used as an LED series resistor, pull-up resistor, or general current-limiting element in consumer electronics and industrial control circuits where a 330Ω ±5% value at 0.66W is sufficient. Its 1206 SMD format supports automated pick-and-place on high-volume PCBs while delivering more dissipation than 0805-class alternatives. The ±200ppm/°C TCR is suitable for non-critical signal conditioning in equipment operating over -55°C to +125°C.

What are the specifications of ERJP08J331V?

Pbfree CodeYes
Reach Compliance CodeCompliant
Factory Lead Time22Weeks
YTEOL11
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.6mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.66W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance330Ω
Resistor TypeFIXED RESISTOR
Size Code1206
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient200ppm/°C
Terminal FinishMATTE TIN OVER NICKEL
Terminal ShapeWRAPAROUND
Tolerance5%
Working Voltage500V
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJP08J331V datasheet?

ERJP08J331V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJP08J331V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How much current does ERJP08J331V supply to an LED when powered from a 5V logic output?

With a 5V supply and a forward voltage of approximately 2V for a standard red LED, the current through ERJP08J331V at 330Ω is (5V - 2V)/330Ω ≈ 9.1mA. This falls within the typical 10mA target for indicator LEDs, and the resistor dissipates only 27mW — far below the 0.66W rating, so no derating is required.

When would an engineer choose ERJP08J331V over the ±1% ERJP08F3300V for an LED series application?

For LED brightness setting, the ±5% ERJP08J331V is normally sufficient since LED forward voltage variation of ±100mV already introduces more uncertainty than the resistor tolerance. The J-series part is lower cost than the F-series ±1% variant, making ERJP08J331V the preferred choice for high-volume LED indicator circuits where exact current matching between channels is not required.

What is the maximum safe voltage across ERJP08J331V before exceeding its 0.66W power rating?

The maximum continuous voltage across ERJP08J331V at 330Ω and 0.66W is V = √(P × R) = √(0.66 × 330) ≈ 14.8V. Designs applying up to 12V DC across this resistor dissipate 0.44W — within the rated limit with a 33% margin. At 24V DC the dissipation reaches 1.75W, which exceeds the rating and would require two 330Ω resistors in series or a higher-wattage part.

How does ERJP08J331V's 1206 package simplify SMT assembly compared to an axial through-hole 330Ω resistor?

The ERJP08J331V in 1206 case (3.2 mm × 1.6 mm) is placed by automated pick-and-place at line speeds exceeding 10,000 components per hour, eliminating manual lead-forming and insertion steps required for axial through-hole parts. The SMD format also allows double-sided reflow soldering, reducing board area and enabling denser layouts in modern compact PCB designs.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0147
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$0.0784$0.08
100+$0.0560$5.60
409+$0.0294$12.02
1702+$0.0147$25.02
pcs
Unit price: $0.0784 · Total: $0.08

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK