ERJP08J275V Panasonic Resistor (Other) In Stock

Panasonic ERJP08J275V is a thick film surface mount resistor in 1206 case with 2.7MΩ resistance, ±5% tolerance, 0.66W power rating, and ±200ppm/°C temperature coefficient. RoHS-compliant high-resistance SMD component for voltage sensing and high-impedance circuit designs.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJP08J275VOther
Quick Facts
Manufacturer
Panasonic
Package
Other
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0540(MOQ 50)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJP08J275V?

  • High 2.7MΩ resistance value with ±5% tolerance for high-impedance sensing and bias networks
  • 0.66W power rating in 1206 package (3.2mm × 1.6mm) handling moderate power dissipation
  • ±200ppm/°C temperature coefficient suitable for industrial applications across wide temperature ranges
  • RoHS-compliant thick film construction with REACH-compliant terminations

What is ERJP08J275V used for?

The ERJP08J275V is used in voltage divider networks for high-voltage sensing, input protection bias circuits, and leakage current measurement paths in industrial meters and power conversion equipment. Its 2.7MΩ high resistance value makes it ideal for feedback networks in high-voltage power supplies operating above 100V where low quiescent current is critical. The part is also found in ESD protection networks and ADC input conditioning circuits requiring high-impedance signal paths.

What are the specifications of ERJP08J275V?

Pbfree CodeYes
Reach Compliance CodeCompliant
Factory Lead Time22Weeks
YTEOL11
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.6mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.66W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance2700000Ω
Resistor TypeFIXED RESISTOR
Size Code1206
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient200ppm/°C
Terminal FinishMATTE TIN OVER NICKEL
Terminal ShapeWRAPAROUND
Tolerance5%
Working Voltage500V
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJP08J275V datasheet?

ERJP08J275V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJP08J275V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What maximum voltage can be applied across ERJP08J275V without exceeding its 0.66W power rating?

For the 2.7MΩ ERJP08J275V, the maximum voltage at rated 0.66W power is V = sqrt(P × R) = sqrt(0.66 × 2,700,000) ≈ 1334V. However, the working voltage for 1206 chip resistors is typically limited to 200V by the package rating, so the power limit is rarely the binding constraint at typical circuit voltages.

How stable is the 2.7MΩ resistance of ERJP08J275V across an industrial -40°C to +85°C temperature range?

With a ±200ppm/°C temperature coefficient, ERJP08J275V's 2.7MΩ resistance can shift by up to ±54kΩ across a 100°C span. This 2% drift is acceptable for voltage divider bias and sensing networks but should be budgeted in precision ADC front-end designs to avoid measurement error.

For a 12V-to-3.3V voltage divider using ERJP08J275V, what companion resistor value is needed?

To create a 12V-to-3.3V divider with the 2.7MΩ ERJP08J275V as the top resistor, the bottom resistor must be approximately 1.024MΩ, calculated from R_bottom = (Vout × R_top) / (Vin - Vout) = (3.3 × 2.7M) / 8.7 ≈ 1.024MΩ. The quiescent current through the divider would be only about 4.4µA, ideal for battery-powered sensing applications.

How does ERJP08J275V's 1206 package compare to 0805 for high-resistance SMD resistors?

The 1206 package of ERJP08J275V (3.2mm × 1.6mm, 0.66W) provides better power handling than 0805 (2.0mm × 1.25mm, typically 0.125W), and the larger body supports more stable printing of high-resistance thick film material. For 2.7MΩ values, 1206 offers improved long-term stability and voltage rating compared to 0805 alternatives.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0540
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
50+$0.0600$3.00
250+$0.0570$14.25
500+$0.0540$27.00
pcs
Unit price: $0.0600 · Total: $3.00

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK