ERJP08F82R0V Panasonic Resistor (Other) In Stock

Panasonic ERJP08F82R0V is a thick film surface-mount resistor in 1206 case with 82Ω resistance, ±1% tolerance, and 0.66W power rating. Its ±100ppm/°C temperature coefficient ensures stable resistance in precision low-value applications including current sensing and driver termination. Available from stock worldwide with fast shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJP08F82R0VOther
Quick Facts
Manufacturer
Panasonic
Package
Other
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0377(MOQ 5)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJP08F82R0V?

  • 82Ω resistance with ±1% tight tolerance for precision current-sensing and termination circuits
  • Enhanced 0.66W power rating in 1206 SMD case for higher dissipation applications
  • ±100ppm/°C low temperature coefficient for stable resistance in temperature-varying environments
  • RoHS and REACH compliant with JEDEC e3 moisture sensitivity rating

What is ERJP08F82R0V used for?

The ERJP08F82R0V is used in RS-485 and CAN bus termination networks, where 82Ω closely matches transmission line impedance and reduces signal reflections on data communication lines. It is also deployed in current-sensing shunt networks and emitter degeneration resistors for BJT amplifier stages, where low resistance combined with ±1% accuracy directly determines gain and bias accuracy. Its 0.66W rating accommodates continuous power dissipation in motor driver gate resistor and snubber applications.

What are the specifications of ERJP08F82R0V?

Pbfree CodeYes
Reach Compliance CodeCompliant
Factory Lead Time22Weeks
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.6mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.66W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance82Ω
Resistor TypeFIXED RESISTOR
Size Code1206
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient100ppm/°C
Terminal FinishMATTE TIN OVER NICKEL
Terminal ShapeWRAPAROUND
Tolerance1%
Working Voltage500V
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJP08F82R0V datasheet?

ERJP08F82R0V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJP08F82R0V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How does the 82Ω ERJP08F82R0V perform as a bus termination resistor on RS-485 lines?

RS-485 cables typically have a characteristic impedance of 100Ω to 120Ω, and the 82Ω ERJP08F82R0V can be used as part of a split termination network. Pairing two 82Ω resistors in series gives 164Ω total, or a single 82Ω near 100Ω termination reduces reflections to acceptable levels on runs below 30 meters at data rates up to 1Mbps.

What continuous current can flow through the ERJP08F82R0V without exceeding its power rating?

The maximum allowable power is 0.66W. For an 82Ω resistor, the safe continuous current is approximately 89.7mA using P = I² × R. Designers should derate to about 70% of this — around 63mA — at ambient temperatures above 70°C to ensure long-term reliability in enclosed enclosures or high-temperature environments.

How does ±100ppm/°C temperature coefficient of ERJP08F82R0V affect current-sensing accuracy over a 50°C range?

Over a 50°C operating range, the 82Ω resistance drifts by at most ±0.5%, or approximately ±0.41Ω. In a current-sensing circuit where shunt voltage is measured by a 12-bit ADC at 3.3V full scale, this drift translates to less than 2 LSB variation, which is acceptable for most motor control and power monitoring applications.

Is the ERJP08F82R0V a suitable snubber resistor in a MOSFET switching circuit?

Yes, in RC snubber networks across MOSFET drains, an 82Ω resistor limits peak ringing current while a snubber capacitor absorbs switching energy. At 0.66W, the ERJP08F82R0V handles the repetitive pulse dissipation at switching frequencies below 100kHz in typical 24V to 48V gate-drive and motor-driver circuits.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0377
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
5+$0.1300$0.65
25+$0.1210$3.02
50+$0.1150$5.75
5000+$0.0377$188.50
pcs
Unit price: $0.1300 · Total: $0.65

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK