ERJP08F68R0V Panasonic Resistor (Other) In Stock

Panasonic ERJP08F68R0V is a thick film surface mount resistor in 1206 package with 68Ω resistance, ±1% tolerance, and 0.66W power rating. Features ±100ppm/°C temperature coefficient with RoHS-compliant Pb-free construction. Available in stock worldwide with competitive pricing.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJP08F68R0VOther
Quick Facts
Manufacturer
Panasonic
Package
Other
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0377(MOQ 50)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJP08F68R0V?

  • 68Ω ±1% precision for signal termination, damping, and current limiting applications
  • Enhanced 0.66W power rating in 1206 SMT package, 32% more headroom than standard 0.5W 1206
  • ±100ppm/°C temperature coefficient for consistent resistance from -55°C to +155°C
  • Pb-free JESD-609 e3 and REACH-compliant for automotive, industrial, and consumer electronics

What is ERJP08F68R0V used for?

The ERJP08F68R0V is suited for RS-485 and CAN bus termination resistors, LED current limiting, and gate drive damping in power electronics where 68Ω precision resistance at moderate power is needed. Its 0.66W power rating and ±1% tolerance make it reliable in audio amplifier feedback networks and sensor signal conditioning circuits operating across wide temperature ranges. The 1206 SMT footprint enables high-density automated assembly in industrial control boards and automotive ECUs.

What are the specifications of ERJP08F68R0V?

Pbfree CodeYes
Reach Compliance CodeCompliant
Factory Lead Time22Weeks
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.6mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.66W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance68Ω
Resistor TypeFIXED RESISTOR
Size Code1206
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient100ppm/°C
Terminal FinishMATTE TIN OVER NICKEL
Terminal ShapeWRAPAROUND
Tolerance1%
Working Voltage500V
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJP08F68R0V datasheet?

ERJP08F68R0V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJP08F68R0V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What current does ERJP08F68R0V limit through an LED powered from a 5V supply?

With a 5V supply and a typical LED forward voltage of 2V, ERJP08F68R0V limits LED current to approximately 44mA (3V / 68Ω = 44.1mA), dissipating about 132mW — well within the 0.66W power rating. For a 3.3V supply with the same LED, the current would be approximately 19mA (1.3V / 68Ω), suitable for signal indicator LEDs at reduced brightness.

Can ERJP08F68R0V serve as a CAN bus termination resistor, and how close is 68Ω to the standard 120Ω?

Standard CAN bus termination requires 120Ω at each end, so 68Ω alone does not meet the CAN specification. However, two ERJP08F68R0V resistors in series would give 136Ω, approximately 13% above 120Ω — acceptable in short-bus low-speed CAN networks but not recommended for high-speed CAN-FD. For exact 120Ω termination, a dedicated 120Ω ±1% 1206 resistor is the correct choice.

Why does the 0.66W rating of ERJP08F68R0V matter compared to a 0.5W 1206 resistor in gate drive design?

In a MOSFET gate drive circuit where the 68Ω resistor dissipates switching energy at 200kHz, the average power can approach 0.5–0.6W depending on gate charge and frequency. The 0.66W rating of ERJP08F68R0V provides approximately 10–30% thermal margin over standard 0.5W parts, reducing the risk of resistor failure under sustained high-frequency switching and ambient temperature above 70°C.

What second-source options exist if ERJP08F68R0V's 22-week lead time causes procurement delays?

For a 68Ω ±1% 1206 0.66W resistor with ±100ppm/°C temperature coefficient, comparable parts from Yageo (RC1206FR-0768RL) and Vishay (CRCW120668R0FKEA) share the same footprint and electrical characteristics. These alternatives typically carry shorter 8–12 week lead times from distributor stock, providing a reliable bridge supply while Panasonic orders are fulfilled.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0377
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
50+$0.0500$2.50
1000+$0.0480$48.00
2500+$0.0460$115.00
5000+$0.0377$188.50
pcs
Unit price: $0.0500 · Total: $2.50

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK