ERJP08F6203V Panasonic Resistor (Other) In Stock

Panasonic ERJP08F6203V is a thick film surface mount resistor in 1206 package with 620 kΩ resistance, ±1% tolerance, 0.66W power rating, and ±100 ppm/°C temperature coefficient. RoHS compliant and available from stock with worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJP08F6203VOther
Quick Facts
Manufacturer
Panasonic
Package
Other
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0285(MOQ 50)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJP08F6203V?

  • 620 kΩ thick film resistor with ±1% tolerance for precision high-impedance voltage divider and biasing networks
  • 1206 SMD package (3.2 mm × 1.6 mm × 0.6 mm) rated at 0.66W continuous power dissipation
  • ±100 ppm/°C TCR with Pb-free, RoHS and REACH compliant construction for industrial and medical equipment

What is ERJP08F6203V used for?

The ERJP08F6203V is used in high-impedance voltage divider networks for high-voltage monitoring circuits, op-amp non-inverting bias networks, and ADC input attenuation stages where its 620 kΩ resistance limits leakage current to sub-microampere levels. Its ±1% tolerance ensures divider ratio accuracy within ±2% when paired with a matching precision resistor across 3.3 V to 300 V measurement rails. The 1206 package and 0.66W rating also support bleeder resistor and discharge network applications in switch-mode power supply designs.

What are the specifications of ERJP08F6203V?

Pbfree CodeYes
Reach Compliance CodeCompliant
Factory Lead Time22Weeks
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.6mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.66W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance620000Ω
Resistor TypeFIXED RESISTOR
Size Code1206
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient100ppm/°C
Terminal FinishMATTE TIN OVER NICKEL
Terminal ShapeWRAPAROUND
Tolerance1%
Working Voltage500V
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJP08F6203V datasheet?

ERJP08F6203V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJP08F6203V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How accurately does a pair of ERJP08F6203V resistors set a 10:1 voltage divider ratio at 50 V input?

With ±1% tolerance on both the 620 kΩ top resistor and the corresponding bottom resistor, the worst-case divider ratio error is ±2%, yielding an output range of 4.9 V to 5.1 V for a nominal 5.0 V target at 50 V input. Using matched resistors from the same production lot typically reduces mismatch to below ±0.2%, achieving effective divider accuracy suitable for 12-bit ADC measurement at the 50 V bus level.

What is the maximum voltage that ERJP08F6203V can continuously withstand without exceeding its power rating?

At 0.66W rated power, the maximum continuous voltage across the 620 kΩ ERJP08F6203V is V = sqrt(P × R) = sqrt(0.66 × 620000) ≈ 640 V. However, the working voltage of a 1206 package is typically limited to 200 V by the ceramic substrate creepage and clearance specifications, so the 620 kΩ value at 0.66W means current rather than voltage is the limiting factor in circuits below 200 V.

When is ERJP08F6203V a suitable choice for an op-amp inverting input bias network in a precision instrumentation design?

The ERJP08F6203V is a good fit for op-amp bias networks in precision designs when input bias current is below 1 nA, since the 620 kΩ resistance introduces a worst-case offset voltage of only 0.62 mV per 1 nA bias current. Its ±100 ppm/°C TCR keeps this offset drift below 0.062 mV per 10°C change, acceptable for 14-bit to 16-bit data acquisition front ends operating in a -25°C to +85°C industrial temperature range.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0285
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
50+$0.0500$2.50
1000+$0.0480$48.00
2500+$0.0460$115.00
5000+$0.0288$144.00
10000+$0.0285$285.00
pcs
Unit price: $0.0500 · Total: $2.50

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK