ERJP08F5101V Panasonic Resistor (Other) In Stock

Panasonic ERJP08F5101V is a thick film surface mount resistor in 1206 package with 5.1kΩ resistance, ±1% tolerance, 0.66W power rating, and ±100ppm/°C TCR. RoHS compliant and readily available with worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJP08F5101VOther
Quick Facts
Manufacturer
Panasonic
Package
Other
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0375(MOQ 10)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJP08F5101V?

  • 5.1kΩ resistance with ±1% tight tolerance for precision voltage dividers and bias networks
  • Enhanced 0.66W power rating in standard 1206 footprint — 2.6× the power of typical 1206 resistors
  • ±100ppm/°C TCR providing stable resistance across industrial temperature ranges
  • Anti-surge thick film construction with RoHS/REACH compliance (JESD-609 e3)

What is ERJP08F5101V used for?

The ERJP08F5101V is well-suited for pull-up resistor networks in I2C and SPI bus designs operating at 3.3V or 5V, where 5.1kΩ provides appropriate bus-speed and current balance. It suits operational amplifier gain-setting feedback networks, voltage reference dividers, and current-sensing burden resistors in power monitoring circuits. The 0.66W rating makes it appropriate for industrial control panels and telecommunications equipment where higher dissipation margins are needed in a 1206 SMT package.

What are the specifications of ERJP08F5101V?

Pbfree CodeYes
Reach Compliance CodeCompliant
Factory Lead Time22Weeks
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.6mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.66W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance5100Ω
Resistor TypeFIXED RESISTOR
Size Code1206
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient100ppm/°C
Terminal FinishMATTE TIN OVER NICKEL
Terminal ShapeWRAPAROUND
Tolerance1%
Working Voltage500V
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJP08F5101V datasheet?

ERJP08F5101V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJP08F5101V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How does the ERJP08F5101V perform as a pull-up resistor on a 5V I2C bus?

On a 5V I2C bus, a 5.1kΩ pull-up resistor like the ERJP08F5101V draws about 0.98mA per line at logic high, satisfying the 3mA maximum sink current limit for standard-mode I2C at 100kHz. Power dissipation is only 4.9mW — far below the 0.66W rating — leaving a large thermal margin even in warm enclosures up to 85°C.

What voltage can the ERJP08F5101V withstand while staying within its 0.66W power limit?

At 5.1kΩ and 0.66W maximum power, the ERJP08F5101V can handle a continuous voltage of up to approximately 58V — calculated as V = sqrt(P × R) = sqrt(0.66 × 5100). This exceeds typical 24V and 48V industrial supply rails, providing comfortable margin for designs where transient overvoltage spikes may momentarily double the nominal voltage.

How does the ±100ppm/°C TCR of the ERJP08F5101V affect gain accuracy in an op-amp circuit over temperature?

In an inverting amplifier where two 5.1kΩ resistors set unity gain, a ±100ppm/°C TCR on both resistors results in nearly identical drift, so the gain ratio stays stable. Over 100°C of temperature change, each resistor drifts by ±1%, but the ratio drifts by less than ±0.02% when both resistors come from the same lot, making this part suitable for precision 0.1% gain circuits without external trimming.

When should a designer upgrade from a standard 0.25W 1206 resistor to the ERJP08F5101V at 5.1kΩ?

A designer should choose the ERJP08F5101V when average power dissipation exceeds 0.25W or when surge robustness is required. At 5.1kΩ, even a 36V supply produces 254mW — just above a 0.25W part's rating — making the 0.66W ERJP08F5101V the appropriate upgrade for 36V or 48V industrial systems where margining and long-term reliability matter.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0375
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
10+$0.0880$0.88
100+$0.0740$7.40
1000+$0.0660$66.00
5000+$0.0375$187.50
pcs
Unit price: $0.0880 · Total: $0.88

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK