ERJP08F5100V Panasonic Resistor (Other) In Stock

Panasonic ERJP08F5100V is a thick film chip resistor in 1206 case with 510Ω resistance, ±1% tolerance, and 0.66W power rating. It features ±100ppm/°C temperature coefficient and RoHS-compliant lead-free construction in a 3.2mm × 1.6mm × 0.6mm package. Available from distributors with worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJP08F5100VOther
Quick Facts
Manufacturer
Panasonic
Package
Other
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0375(MOQ 10)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJP08F5100V?

  • 510Ω resistance at ±1% tolerance for precision current-limiting and biasing in 1206 SMT package
  • 0.66W power rating in 1206 format (3.2mm × 1.6mm × 0.6mm) handling over 5× the dissipation of 0402 resistors
  • ±100ppm/°C temperature coefficient ensuring stable 510Ω resistance from -55°C to +155°C in industrial designs
  • RoHS-compliant with JESD-609 e3 lead-free code meeting global environmental regulations for electronics manufacturing

What is ERJP08F5100V used for?

The ERJP08F5100V is widely used in current-limiting resistor networks for LED arrays, pull-up and pull-down configurations on digital I/O lines, and voltage divider chains in microcontroller-based systems requiring a 510Ω, ±1% accuracy in a 1206 package. Its 0.66W power rating and ±100ppm/°C stability also make it suitable for industrial sensor interfaces, motor driver gate resistor networks, and power supply soft-start circuits that demand reliable performance across extended temperature ranges.

What are the specifications of ERJP08F5100V?

Pbfree CodeYes
Reach Compliance CodeCompliant
Factory Lead Time22Weeks
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.6mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.66W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance510Ω
Resistor TypeFIXED RESISTOR
Size Code1206
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient100ppm/°C
Terminal FinishMATTE TIN OVER NICKEL
Terminal ShapeWRAPAROUND
Tolerance1%
Working Voltage500V
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJP08F5100V datasheet?

ERJP08F5100V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJP08F5100V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

For a 3.3V GPIO pull-up network, how does the ERJP08F5100V's 510Ω resistance affect pull-up current?

With 510Ω at ±1% connected to a 3.3V supply, the pull-up current to a logic low output is approximately 6.5mA, which the ERJP08F5100V handles easily within its 0.66W rating. This resistor value also speeds up rising edge transitions compared to 10kΩ pull-ups, benefiting I2C buses and open-drain signal lines that need fast pull-up times.

How does the ERJP08F5100V's 0.66W rating benefit motor driver gate resistor applications versus an 0805 alternative?

Standard 0805 resistors rated at 0.125W would be at risk of thermal failure when used as gate resistors in high-frequency motor driver switching circuits where momentary gate charge and discharge currents can cause short-duration power spikes exceeding 0.125W. The ERJP08F5100V's 0.66W rating in a 1206 package provides a 5x safety margin, ensuring reliable operation at 510Ω even in PWM-driven motor control applications up to several hundred kilohertz.

What is the resistance drift of the ERJP08F5100V over a -55°C to +155°C industrial operating range?

With a ±100ppm/°C temperature coefficient, the ERJP08F5100V drifts at most 100ppm per degree Celsius. Over the full 210°C span from -55°C to +155°C, TCR contributes up to approximately 2.1% drift on the 510Ω nominal value, which added to the ±1% initial tolerance gives a total worst-case resistance variation of about ±3.1% for industrial circuit budget planning.

Is the ERJP08F5100V interchangeable with other 510Ω 1206 resistors from different manufacturers?

The ERJP08F5100V meets the standard 1206 footprint (3.2mm × 1.6mm × 0.6mm) and 510Ω E96 series resistance value at ±1% tolerance, so it is dimensionally and electrically compatible with equivalent 0.66W 1206 resistors from other manufacturers. Procurement engineers should verify that the replacement part also carries the same JESD-609 e3 lead-free code and ±100ppm/°C or better TCR to ensure drop-in compatibility.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0375
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
10+$0.0880$0.88
100+$0.0800$8.00
1000+$0.0660$66.00
5000+$0.0375$187.50
pcs
Unit price: $0.0880 · Total: $0.88

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK