ERJP08F3301V Panasonic Resistor (Other) In Stock

Panasonic ERJP08F3301V is a 3300 Ω thick-film surface-mount resistor in 1206 package with ±1% tolerance and 0.66 W power rating, ideal for precision industrial and power electronics applications. RoHS-compliant lead-free construction. From $0.06 in stock worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJP08F3301VOther
Quick Facts
Manufacturer
Panasonic
Package
Other
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0310(MOQ 50)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJP08F3301V?

  • 3300 Ω with ±1% (F-grade) tolerance delivers precision resistance for voltage divider and gain-set applications
  • 0.66 W dissipation in a 1206 (3.2 mm × 1.6 mm) package provides more than 2× the power headroom of standard 1206 types
  • RoHS-compliant lead-free terminations (JESD-609 e3) comply with EU RoHS 2 and international environmental directives
  • Rectangular thick-film construction ensures reliable long-term stability with low parasitic inductance for high-frequency circuits

What is ERJP08F3301V used for?

The ERJP08F3301V 3300 Ω chip resistor is commonly used in current-limiting circuits for LED drivers, feedback networks for switching regulators, and bias resistors for op-amp stages in industrial instrumentation. Its 0.66 W rating accommodates the higher dissipation found in 24 V to 48 V power-rail applications where standard 0.25 W 1206 resistors would be marginal. It also appears in pull-up networks for I2C and SPI buses in embedded control systems operating at 3.3 V or 5 V logic levels.

What are the specifications of ERJP08F3301V?

Pbfree CodeYes
Reach Compliance CodeCompliant
Factory Lead Time22Weeks
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.6mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.66W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance3300Ω
Resistor TypeFIXED RESISTOR
Size Code1206
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient100ppm/°C
Terminal FinishMATTE TIN OVER NICKEL
Terminal ShapeWRAPAROUND
Tolerance1%
Working Voltage500V
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJP08F3301V datasheet?

ERJP08F3301V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJP08F3301V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What current through a 3300 Ω ERJP08F3301V resistor approaches its 0.66 W thermal limit?

Using P = I² × R, the current limit is I = sqrt(0.66 W / 3300 Ω) ≈ 14.1 mA. Designers should derate to 70% of rated power for long-term reliability, limiting continuous current to approximately 10 mA in steady-state circuits. Above 14 mA, the 0.66 W rating is exceeded and the resistor will overheat, so current-sense and current-limiting applications must verify the RMS current stays below this threshold.

How does the ERJP08F3301V perform as a pull-up resistor on a 5 V I2C bus with multiple devices?

On a 5 V I2C bus, a 3300 Ω pull-up resistor draws a maximum of 1.5 mA per line when the bus is held high, dissipating only 7.6 mW per resistor—well within the 0.66 W rating. The 3.3 kΩ value is in the standard recommended range of 1 kΩ to 10 kΩ for I2C bus pull-ups, supporting standard-mode (100 kHz) and fast-mode (400 kHz) operation with typical bus capacitance up to 400 pF.

For switching regulator feedback design, what output voltage does a 3300 Ω upper resistor set when paired with a 1000 Ω lower resistor and 1.25 V reference?

Using the standard feedback formula V_out = V_ref × (1 + R_upper / R_lower), with R_upper = 3300 Ω, R_lower = 1000 Ω, and V_ref = 1.25 V (as in an LM317 or similar), V_out = 1.25 × (1 + 3.3) = 5.375 V. With the ±1% tolerance of the ERJP08F3301V, the actual output could range from approximately 5.27 V to 5.48 V, which designers must check against the regulator's output voltage specification.

What is the lead time and typical packaging format for sourcing the ERJP08F3301V in production quantities?

The ERJP08F3301V has a 22-week factory lead time from Panasonic and is available in tape-and-reel packaging, typically in reels of 5,000 units for the 1206 body size. Production buyers ordering 50,000 or more units should issue purchase orders at least 6 months before the assembly date and negotiate bonded inventory agreements with authorized distributors to mitigate lead-time risk during supply chain disruptions.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0310
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
50+$0.0800$4.00
250+$0.0720$18.00
500+$0.0690$34.50
5000+$0.0310$155.00
pcs
Unit price: $0.0800 · Total: $4.00

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK