ERJP08F2700V Panasonic Resistor (Other) In Stock
Panasonic ERJP08F2700V is a thick film surface mount chip resistor in 1206 case with 270Ω resistance, ±1% tolerance, 0.66W power rating, and ±100ppm/°C temperature coefficient. Ideal for precision pull-up, current limiting, and feedback applications. Available from stock with worldwide shipping.
- Manufacturer
- Panasonic
- Package
- Other
- Pin Count
- 2
- Lifecycle
- ACTIVE
- Datasheet
- ERJP08F2700V Datasheet PDF
- Category
- Resistor
- Price
- From $0.0735(MOQ 1)
- Temp Range
- -55.0°C to 155.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 270Ω ±1% precision resistance for accurate pull-up, current limiting, and voltage divider circuits
- 0.66W power rating in 1206 package (3.2×1.6mm) for higher power density than 0402 or 0603
- ±100ppm/°C temperature coefficient for stable performance across industrial temperature ranges
- Pb-free RoHS and REACH compliant with JESD-609 e3 code
- Surface mount rectangular construction optimized for automated reflow soldering
Applications
The ERJP08F2700V is commonly used in pull-up resistor networks for I2C and open-drain interfaces, current limiting in LED drive circuits at standard 3.3V or 5V supply voltages, and voltage divider networks in analog sensor signal conditioning. Its 0.66W rating and ±1% tolerance make it reliable for industrial sensor interfaces, power supply feedback loops, and communication bus termination. The 1206 surface mount format enables high-speed automated PCB assembly for both consumer and industrial electronics.
Specifications
| Pbfree Code | Yes |
| Reach Compliance Code | Compliant |
| Factory Lead Time | 22Weeks |
| YTEOL | 12 |
| Construction | Rectangular |
| JESD-609 Code | e3 |
| Mounting Feature | SURFACE MOUNT |
| Package Height | 0.6mm |
| Package Length | 3.2mm |
| Package Shape | RECTANGULAR PACKAGE |
| Package Style | SMT |
| Package Width | 1.6mm |
| Packing Method | TR, PUNCHED, 7 INCH |
| Rated Power Dissipation (P) | 0.66W |
| Rated Temperature | 70°C |
| Reference Standard | AEC-Q200, IEC60115-8 |
| Resistance | 270Ω |
| Resistor Type | FIXED RESISTOR |
| Size Code | 1206 |
| Surface Mount | YES |
| Technology | METAL GLAZE/THICK FILM |
| Temperature Coefficient | 100ppm/°C |
| Terminal Finish | MATTE TIN OVER NICKEL |
| Terminal Shape | WRAPAROUND |
| Tolerance | 1% |
| Working Voltage | 500V |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8533.21.00.30 |
| Country of Origin | Japan |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
At 3.3V supply, how much current does the ERJP08F2700V limit to a connected LED or load?
With 270Ω resistance on a 3.3V supply (assuming a 2V forward voltage drop for a red LED), the ERJP08F2700V limits current to approximately 4.8mA ((3.3V - 2V) / 270Ω). For a 5V supply with the same LED, the current would be approximately 11.1mA, within typical LED operating ranges for indicator applications. Power dissipation in the resistor stays below 60mW, well within its 0.66W rating.
How does the ±1% tolerance of ERJP08F2700V benefit precision voltage divider designs?
The ±1% tolerance of the ERJP08F2700V keeps the actual resistance between 267.3Ω and 272.7Ω. In a 270Ω / 270Ω voltage divider on a 5V rail, output voltage error stays within ±1% of the ideal 2.5V midpoint, giving a worst-case output between 2.475V and 2.525V. This level of accuracy suits ADC reference voltage scaling and op-amp bias networks without requiring manual resistor selection or trimming.
Can ERJP08F2700V serve as a pull-up resistor on a 5V I2C bus with 400kHz fast-mode operation?
Yes, a 270Ω pull-up is on the low end of typical I2C pull-up values (typically 1kΩ to 10kΩ for standard mode, 500Ω to 4kΩ for fast mode at 400kHz). At 270Ω on a 5V bus, the pull-up current when the line is pulled low is about 18.5mA, which exceeds most GPIO sink limits. A 270Ω pull-up may be appropriate for very short, heavily loaded bus segments but should be verified against slave device sink current specifications to avoid exceeding GPIO ratings.
How does the 0.66W rating of the 1206 package compare to 0805 alternatives for thermal margin in dense boards?
Standard 0805 resistors are rated at 125mW, while the 1206 ERJP08F2700V handles 0.66W — more than 5 times higher. This extra thermal headroom is valuable in designs where parasitic heating from adjacent components raises ambient temperature, as a 1206 pad has greater copper contact area for heat spreading. For 270Ω applications above 20mA sustained current, the 1206 package provides meaningful safety margin that the 0805 cannot reliably sustain.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About Panasonic
Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.1840 | $0.18 |
| 5+ | $0.1300 | $0.65 |
| 25+ | $0.1210 | $3.02 |
| 50+ | $0.1150 | $5.75 |
| 69+ | $0.0828 | $5.71 |
| 200+ | $0.0735 | $14.70 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”