ERJP08F1502V Panasonic Resistor (Other) In Stock
Panasonic ERJP08F1502V is a thick film surface mount resistor in a 1206 package with 15 kΩ resistance, ±1% tolerance, 0.66 W power rating, and ±100 ppm/°C temperature coefficient. RoHS and REACH compliant, ideal for precision feedback, filtering, and biasing circuits.
- Manufacturer
- Panasonic
- Package
- Other
- Pin Count
- 2
- Lifecycle
- ACTIVE
- Datasheet
- ERJP08F1502V Datasheet PDF
- Category
- Resistor
- Price
- From $0.0375(MOQ 10)
- Temp Range
- -55.0°C to 155.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 15 kΩ resistance with ±1% (F-grade) tolerance enables precise voltage dividers and op-amp feedback networks
- 0.66 W continuous power rating in a 1206 package (3.2 mm × 1.6 mm) exceeds the 0.25 W limit of 0805 equivalents
- ±100 ppm/°C temperature coefficient limits drift to ±0.5% over a 50°C range for stable analog circuit performance
- Lead-free (JESD-609 e3) and REACH Compliant for compliance-free use in global industrial and consumer electronics
Applications
The ERJP08F1502V is appropriate for precision resistor dividers, gain-setting networks in operational amplifiers, and RC filter circuits in analog signal conditioning stages requiring stable 15 kΩ resistance. Its 0.66 W rating in a 1206 footprint supports higher-current feedback and pull-up networks in power management and motor control boards without thermal derating concerns. RoHS and REACH compliance make it directly usable in products sold across EU, North American, and Asia-Pacific markets.
Specifications
| Pbfree Code | Yes |
| Reach Compliance Code | Compliant |
| Factory Lead Time | 22Weeks |
| YTEOL | 12 |
| Construction | Rectangular |
| JESD-609 Code | e3 |
| Mounting Feature | SURFACE MOUNT |
| Package Height | 0.6mm |
| Package Length | 3.2mm |
| Package Shape | RECTANGULAR PACKAGE |
| Package Style | SMT |
| Package Width | 1.6mm |
| Packing Method | TR, PUNCHED, 7 INCH |
| Rated Power Dissipation (P) | 0.66W |
| Rated Temperature | 70°C |
| Reference Standard | AEC-Q200, IEC60115-8 |
| Resistance | 15000Ω |
| Resistor Type | FIXED RESISTOR |
| Size Code | 1206 |
| Surface Mount | YES |
| Technology | METAL GLAZE/THICK FILM |
| Temperature Coefficient | 100ppm/°C |
| Terminal Finish | MATTE TIN OVER NICKEL |
| Terminal Shape | WRAPAROUND |
| Tolerance | 1% |
| Working Voltage | 500V |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8533.21.00.30 |
| Country of Origin | Japan |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the worst-case resistance error of the ERJP08F1502V across a -40°C to +85°C industrial temperature range?
The ERJP08F1502V has ±1% initial tolerance (placing the value between 14.85 kΩ and 15.15 kΩ) and a ±100 ppm/°C temperature coefficient. Over a 125°C span from -40°C to +85°C, temperature drift adds ±1.25%, giving a combined worst-case error of approximately ±2.25% relative to the nominal 15 kΩ—acceptable for most analog filter and feedback resistor applications where gain accuracy requirements are loosely specified.
How does the ERJP08F1502V compare to the ERJP06F1502V in terms of power handling for a 15 kΩ pull-up resistor on a 5 V bus?
On a 5 V bus, a 15 kΩ pull-up dissipates approximately 1.67 mW when the line is pulled low to 0 V—well below both parts' ratings. The ERJP08 (1206 package) is rated at 0.66 W while the ERJP06 (0805 package) is rated at 0.25 W. For a low-current 5 V pull-up either part is thermally adequate, but the ERJP08F1502V provides 4× more thermal headroom if the circuit can momentarily source more than 4 mA through the resistor.
Can the ERJP08F1502V be used as the feedback resistor in a 12 V to 3.3 V LDO regulator's output voltage divider?
Yes. In a typical adjustable LDO, the output voltage is set by the ratio of two resistors connected to the feedback pin. Using 15 kΩ (ERJP08F1502V) as the upper divider resistor paired with an appropriate lower resistor produces a stable 3.3 V output. The ±1% tolerance keeps output voltage error within ±2% when combined with similarly-toleranced lower resistors, and the 0.66 W power rating far exceeds the sub-10 mW dissipation in the divider at 12 V.
Is the ERJP08F1502V RoHS compliant and what certifications support its use in products exported to Europe?
Yes. Panasonic lists the ERJP08F1502V as REACH Compliant with a Pb-free code of Yes and a JESD-609 code of e3, confirming lead-free solder terminations. These qualifications satisfy EU RoHS Directive 2011/65/EU and REACH Regulation EC 1907/2006 requirements, allowing the part to be incorporated into finished electronic assemblies exported to EU member states without additional exemption documentation.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About Panasonic
Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 10+ | $0.0880 | $0.88 |
| 100+ | $0.0760 | $7.60 |
| 1000+ | $0.0660 | $66.00 |
| 5000+ | $0.0375 | $187.50 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”