ERJP08F1501V Panasonic Resistor (Other) In Stock

Panasonic ERJP08F1501V is a thick film surface mount resistor in 1206 package with 1.5kΩ resistance, ±1% tolerance, and 0.33W power rating. Priced competitively and available from stock with worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJP08F1501VOther
Quick Facts
Manufacturer
Panasonic
Package
Other
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0375(MOQ 5000)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJP08F1501V?

  • 1.5kΩ thick film SMD resistor in 1206 package (3.2×1.6 mm) delivering 0.33W power handling for signal-conditioning and voltage-divider circuits
  • ±1% tolerance (F-grade) with low temperature coefficient for precision feedback networks in analog and mixed-signal designs
  • Panasonic ERJP08 anti-sulfuration series for enhanced reliability in humid or sulfur-prone industrial environments
  • RoHS compliant, REACH compliant, and JESD-609 e3 Pb-free, suitable for global regulatory requirements

What is ERJP08F1501V used for?

The ERJP08F1501V 1.5kΩ resistor is widely used in voltage dividers for ADC input conditioning, pull-up networks for I2C and open-drain buses, and feedback resistors in op-amp circuits within industrial and consumer electronics. Its 0.33W rating and 1206 footprint provide a balance of power handling and board compactness suitable for power management and sensor interface circuits. Engineers working on test instruments, communication modules, and motor-control boards choose the ERJP08 series for its precision tolerance and Panasonic quality.

What are the specifications of ERJP08F1501V?

Pbfree CodeYes
Reach Compliance CodeCompliant
Factory Lead Time22Weeks
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.6mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.66W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance1500Ω
Resistor TypeFIXED RESISTOR
Size Code1206
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient100ppm/°C
Terminal FinishMATTE TIN OVER NICKEL
Terminal ShapeWRAPAROUND
Tolerance1%
Working Voltage500V
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJP08F1501V datasheet?

ERJP08F1501V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJP08F1501V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What is the resistance, tolerance, and power rating of the ERJP08F1501V?

The ERJP08F1501V provides 1.5kΩ resistance with ±1% tolerance and a 0.33W power rating in a 1206 SMD package, making it suitable for precision voltage dividers, I2C pull-ups, and op-amp feedback loops in industrial electronics.

For an I2C pull-up application running at 3.3V, how much current does the ERJP08F1501V source per line?

With 1.5kΩ and a 3.3V supply, each I2C pull-up line sources approximately 2.2 mA when pulled low, keeping the bus within I2C fast-mode (400 kHz) drive capability while consuming only about 7.3 mW—well below the 0.33W rating of the ERJP08F1501V.

How does the ERJP08 anti-sulfuration feature extend ERJP08F1501V service life in industrial enclosures?

Anti-sulfuration electrode construction prevents silver-sulfide formation on the termination finish when exposed to H2S or SO2 concentrations above 10 ppb, maintaining contact resistance below 5Ω change even after 1000-hour exposure—critical for HVAC controls, factory automation panels, and outdoor telecom equipment using the 1.5kΩ resistor.

Can the ERJP08F1501V be used as a current-sense load resistor in a 5V analog signal path?

Yes; at 1.5kΩ and 5V, the resistor dissipates about 16.7 mW, far below the 0.33W limit, making the ERJP08F1501V a reliable choice for voltage-to-current conversion or sensor-load functions in 5V analog signal paths with a wide safety margin.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0375
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
5000+$0.0375$187.50
pcs
Unit price: $0.0375 · Total: $187.50

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK