ERJP08F1303V Panasonic Resistor (Other) In Stock

Panasonic ERJP08F1303V is a thick film surface mount resistor in 1206 package with 130 kΩ resistance, ±1% tolerance, 0.66W power rating, and ±100 ppm/°C temperature coefficient. RoHS compliant and available from stock with worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJP08F1303VOther
Quick Facts
Manufacturer
Panasonic
Package
Other
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0375(MOQ 5000)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJP08F1303V?

  • 130 kΩ thick film resistor with tight ±1% tolerance for precision voltage divider and feedback network applications
  • 1206 SMD package (3.2 mm × 1.6 mm × 0.6 mm) rated at 0.66W continuous power dissipation
  • ±100 ppm/°C TCR with Pb-free, RoHS and REACH compliant construction for industrial and automotive use

What is ERJP08F1303V used for?

The ERJP08F1303V is used in precision voltage divider networks for ADC reference scaling, op-amp feedback loops, and bias resistor chains in analog signal conditioning circuits. Its ±1% tolerance and ±100 ppm/°C TCR ensure that gain error stays within 0.2% over a -55°C to +125°C industrial temperature range when paired in a matched pair configuration. The 1206 footprint and 0.66W rating also support high-impedance pull-up and discharge resistors in battery management and power sequencing circuits.

What are the specifications of ERJP08F1303V?

Pbfree CodeYes
Reach Compliance CodeCompliant
Factory Lead Time22Weeks
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.6mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.66W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance130000Ω
Resistor TypeFIXED RESISTOR
Size Code1206
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient100ppm/°C
Terminal FinishMATTE TIN OVER NICKEL
Terminal ShapeWRAPAROUND
Tolerance1%
Working Voltage500V
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJP08F1303V datasheet?

ERJP08F1303V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJP08F1303V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How does the ±1% tolerance of ERJP08F1303V affect voltage divider accuracy in a 3.3 V ADC reference circuit?

With ±1% tolerance on both resistors in a 130 kΩ / 130 kΩ voltage divider, the worst-case output error is approximately ±2%, meaning the 1.65 V midpoint can range from 1.617 V to 1.683 V. Using matched ERJP08F1303V resistors from the same tape reel typically reduces actual mismatch to below 0.2%, improving effective ADC reference accuracy beyond the nominal ±1% figure.

What is the maximum continuous current through ERJP08F1303V at its rated 0.66W power dissipation?

The maximum continuous current is I = sqrt(P/R) = sqrt(0.66 / 130000) ≈ 2.25 mA at full 0.66W rated power. In practice, a 50% derating to 0.33W limits continuous operating current to approximately 1.6 mA, which is typical for high-impedance feedback and bias networks operating on 3.3 V to 24 V rails where the 130 kΩ value naturally limits current to this range.

In what scenarios does a designer choose ERJP08F1303V over a 0402 or 0201 resistor of the same value?

The 1206 package of ERJP08F1303V is preferred over 0402 (1.0 mm × 0.5 mm) or 0201 (0.6 mm × 0.3 mm) resistors when the 0.66W power rating is needed, when manual rework or inspection is required, or when the PCB design uses a 0.25 mm minimum trace width that cannot reliably land a 0201 pad. The larger 3.2 mm × 1.6 mm footprint also reduces pick-and-place placement error risk in high-mix low-volume production runs.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0375
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
5000+$0.0375$187.50
pcs
Unit price: $0.0375 · Total: $187.50

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK