ERJP03J2R4V Panasonic Resistor (Resistor Chip) In Stock

Panasonic ERJP03J2R4V is a low-value thick-film surface mount resistor in 0603 package providing 2.4 Ω resistance at ±5% tolerance with 0.2 W power rating. This current-sensing resistor features -150 to +400 ppm/°C temperature coefficient for stable measurement across extended temperature ranges. Available in stock globally from certified distributors with RoHS compliance and rapid shipping options.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJP03J2R4VResistor Chip
Quick Facts
Manufacturer
Panasonic
Package
Resistor Chip
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0200(MOQ 50)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJP03J2R4V?

  • Low 2.4 Ω Value Optimized for Current-Sense and Inrush Limiting
  • 0603 Package for Compact Board Density in Space-Constrained Designs
  • Wide Temperature Range (-150 to +400 ppm/°C) for Industrial Applications

What is ERJP03J2R4V used for?

The ERJP03J2R4V serves as a precision current-sense resistor in DC power supplies, motor controllers, and battery management systems. Its 2.4 Ω value with 0.2 W rating enables safe measurement of 80+ mA continuous current with minimal voltage drop and power dissipation. The component is widely used in inrush current limiting, reverse polarity protection, and low-side current monitoring in automotive and industrial switching power supplies.

What are the specifications of ERJP03J2R4V?

Pbfree CodeYes
Reach Compliance CodeCompliant
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.45mm
Package Length1.6mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width0.8mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.2W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance2.4Ω
Resistor TypeFIXED RESISTOR
Size Code0603
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient-150,400 ppm/°C
Terminal FinishTIN
Terminal ShapeWRAPAROUND
Tolerance5%
Working Voltage150V
PackageResistor Chip

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan, Mainland China

Where can I find the ERJP03J2R4V datasheet?

ERJP03J2R4V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJP03J2R4V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What are the critical specifications for using ERJP03J2R4V in current-sense applications?

The ERJP03J2R4V provides 2.4 Ω with ±5% tolerance, creating 100 mV drop at 41.7 mA and 200 mV at 83.3 mA, ideal for ADC input ranges (0-200 mV). At maximum 0.2 W rating, continuous current reaches 290 mA (0.2 W / 2.4 Ω). The -150 to +400 ppm/°C coefficient (asymmetric design) maintains sensing accuracy across automotive -40°C to +85°C ranges, with only ±0.028 Ω shift end-to-end.

How does the 2.4 Ω value compare to other current-sense resistor options for DC supplies?

Standard current-sense resistors range from 1 Ω to 10 Ω, with 2.4 Ω offering a balanced middle ground. A 1 Ω resistor produces 100 mV at 100 mA (better SNR but higher dissipation); 5 Ω produces 100 mV at 20 mA (lower current, higher impedance). The ERJP03J2R4V's 2.4 Ω suits 50-100 mA DC supplies in IoT modules, delivering <50 mW dissipation at 150 mA and clear signal conditioning.

When should you use ERJP03J2R4V for inrush limiting versus active soft-start circuits?

ERJP03J2R4V works for 12 V / 5 A supplies as a passive soft-start with RC filtering: 2.4 Ω × 10 µF creates 24 µs time constant, limiting inrush to 5 A peak (reduced from 100 A no-load surge). For aggressive inrush suppression below 2 A peak, active soft-start (series MOSFET gate control) is required. Passive resistor limiting dissipates 2-5 W surge energy; acceptable for <1 Hz startup cycles but not suitable for frequent on-off cycling.

What procurement factors should be considered when ordering ERJP03J2R4V in volume?

Panasonic supplies ERJP03J2R4V in 5,000-unit tape reels with standard 8 mm tape. Lead time is typically 2-3 weeks from stock distributors (Digi-Key, Mouser carry 15,000-30,000 units). Factory direct orders of 500,000+ units receive 12-15% discounts with 6-8 week lead time. For prototyping, 100-unit minimum orders at $0.012-0.018 per unit provide cost-effective access without volume commitment.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0200
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
50+$0.0200$1.00
pcs
Unit price: $0.0200 · Total: $1.00

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK