EEE1VA101UP Panasonic Capacitor Polarised (Other) In Stock
Panasonic EEE1VA101UP is a 100 µF, 35 V radial aluminum electrolytic capacitor from the S Series, rated for 2000 hours at 105°C in an 8 mm × 10.2 mm cylindrical package for power supply filtering. Available from stock with worldwide shipping.
- Manufacturer
- Panasonic
- Package
- Other
- Pin Count
- 2
- Lifecycle
- NOT RECOMMENDED
- Datasheet
- EEE1VA101UP Datasheet PDF
- Category
- Capacitor Polarised
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 100 µF at 35 V DC with 2000-hour rated lifetime at 105°C for reliable long-term operation in high-temperature environments
- Compact 8 mm diameter × 10.2 mm height radial through-hole package fits standard capacitor footprints on power supply PCBs
- RoHS and REACH compliant with maximum DC leakage current of only 0.035 mA, reducing self-discharge in standby power circuits
Applications
The EEE1VA101UP is well suited for output bulk decoupling and energy storage in switch-mode power supplies and DC-DC converters operating up to 35 V, where its 100 µF capacitance smooths load transient currents and reduces output ripple voltage. The 2000-hour, 105°C rating makes it appropriate for industrial power distribution panels, LED driver boards, and motor controller supplies where long service life under elevated temperature is required. Its compact 8 mm × 10.2 mm radial footprint integrates into consumer appliances, HVAC control boards, and telecommunications equipment power rails without board redesign.
Specifications
| Pbfree Code | Yes |
| Reach Compliance Code | Compliant |
| Factory Lead Time | 21Weeks |
| YTEOL | 3 |
| Capacitance | 100 µ F |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| Diameter | 8mm |
| Dielectric Material | ALUMINUM (WET) |
| Height | 10.2mm |
| Leakage Current | 0.035mA |
| Mounting Feature | SURFACE MOUNT |
| Negative Tolerance | 20% |
| Package Shape | CYLINDRICAL PACKAGE |
| Package Style | SMT |
| Packing Method | TR, EMBOSSED, 15 INCH |
| Polarity | POLARIZED |
| Positive Tolerance | 20% |
| Rated (DC) Voltage (URdc) | 35V |
| Reference Standard | AEC-Q200 |
| Ripple Current | 140mA |
| Size Code | 3333 |
| Surface Mount | YES |
| Tan Delta | 0.14 |
| Terminal Shape | FLAT |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8532.22.00.20 |
| Country of Origin | Japan, Malaysia |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for EEE1VA101UP:
suggested
Frequently Asked Questions
What capacitance, voltage rating, and rated lifetime define the EEE1VA101UP and how do they suit switching power supply output stages?
The EEE1VA101UP provides 100 µF at 35 V DC with a 2000-hour operational lifetime at 105°C. For a 24 V output switching supply, these ratings provide a comfortable 30% voltage derating margin, while 100 µF is sufficient to limit output voltage ripple to under 50 mV at typical 100 kHz switching frequencies with moderate load currents.
How does the 2000-hour lifetime rating of the EEE1VA101UP translate to real-world service years in a 40°C ambient environment?
Aluminum electrolytic capacitor lifetime roughly doubles for every 10°C decrease in operating temperature below the rated 105°C. At 40°C ambient (approximately 65°C below the rated maximum), the EEE1VA101UP lifetime extends by a factor of roughly 2^6.5 ≈ 90×, translating the 2000-hour rating to over 180,000 hours or more than 20 years of continuous service in a typical 40°C industrial enclosure.
What PCB footprint does the EEE1VA101UP require and which standard hole pattern should a PCB designer use?
The EEE1VA101UP has an 8 mm body diameter and 10.2 mm height with a standard 3.5 mm lead pitch and 0.6 mm lead diameter. The PCB designer should specify 2 holes of 0.8 mm diameter spaced 3.5 mm apart, with a component keep-out of at least 9 mm diameter to clear the body and allow rework access after reflow or wave soldering.
When is the EEE1VA101UP a better procurement choice than a 35 V polymer aluminum capacitor of the same capacitance?
The EEE1VA101UP wet aluminum electrolytic at 100 µF, 35 V is significantly lower cost per unit than equivalent-rated polymer capacitors, typically 3–5× less expensive at volumes above 1000 pieces. It is the preferred choice for non-critical bulk decoupling rails where ripple current is below approximately 100 mA RMS and the modest ESR (typically 0.5–2 Ω at 100 kHz) does not violate output ripple specifications.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About Panasonic
Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”