EEE-HB1V100R Panasonic Capacitor Polarised (Other) In Stock
Panasonic EEE-HB1V100R is a 10 µF 35 V SMD aluminum electrolytic capacitor with ±20% tolerance in a compact full-reel package, designed for power supply decoupling and bulk energy storage in consumer and industrial electronics. Available in stock worldwide.
- Manufacturer
- Panasonic
- Package
- Other
- Pin Count
- 2
- Lifecycle
- ACTIVE
- Datasheet
- EEE-HB1V100R Datasheet PDF
- Category
- Capacitor Polarised
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 10 µF capacitance at 35 V rating providing reliable bulk energy storage for power supply smoothing and decoupling in 5 V to 24 V systems
- SMD aluminum electrolytic construction in a compact footprint enabling high-volume automated assembly for consumer and industrial PCBs
- Full-reel packaging supporting continuous automated pick-and-place assembly at production volumes exceeding 10,000 units per reel
Applications
EEE-HB1V100R is suitable for output filtering and bulk decoupling on DC-DC converter output stages operating at up to 35 V, where 10 µF capacitance smooths ripple voltage in power supply rails for microcontrollers and analog circuits. Its SMD construction and full-reel packaging make it efficient for high-volume automated assembly in consumer electronics, IoT gateways, and industrial control units. The 35 V rating provides adequate voltage margin when used on 12 V or 24 V rails in motor driver pre-stage filtering and audio amplifier power supply applications.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What capacitance and voltage rating does EEE-HB1V100R offer for power supply decoupling?
EEE-HB1V100R provides 10 µF capacitance rated at 35 V dc with ±20% tolerance. This combination is well-suited for bulk decoupling on 5 V, 12 V, and 24 V power rails in DC-DC converter outputs, providing sufficient energy storage to suppress voltage sag during load transients of 100 mA to 500 mA in embedded system power supplies.
How does the 35 V rating of EEE-HB1V100R provide voltage margin on a 12 V rail?
A 35 V rated capacitor on a 12 V nominal rail provides nearly 3× derating, well above the 2× derating guideline recommended for aluminum electrolytics in high-reliability designs. This margin accommodates voltage spikes of up to 20 V on the 12 V bus during load switching transients, extending the lifetime of the capacitor in industrial power supplies and motor drive circuits operating at up to 24 V.
Is EEE-HB1V100R compatible with automated SMT assembly processes for high-volume production?
Yes. EEE-HB1V100R comes in full-reel SMD packaging, making it directly compatible with automated pick-and-place equipment handling over 10,000 components per reel. Its SMD aluminum electrolytic construction supports standard reflow profiles and enables continuous production of consumer electronics power boards, gateway modules, and industrial controller PCBs without manual insertion.
When should EEE-HB1V100R be chosen over a 10 µF MLCC for output filtering on a 12 V bus?
EEE-HB1V100R aluminum electrolytic is preferred when cost constraints matter: at 10 µF and 35 V, aluminum electrolytics cost significantly less per unit than X5R or X7R MLCCs of equivalent capacitance and voltage. However, the electrolytic has higher ESR (typically 1 Ω to 5 Ω) compared to a ceramic's ESR under 0.1 Ω, so for switching converter output filters above 100 kHz, a parallel combination of EEE-HB1V100R for bulk capacitance and a 100 nF MLCC for high-frequency bypass provides the best cost-performance balance.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About Panasonic
Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”