EEE-HA1C471P Panasonic Capacitor Polarised (Other) In Stock
Panasonic EEE-HA1C471P is a 470 µF, 16 V SMD aluminum electrolytic capacitor from the HA series, offering low ESR, compact chip form factor, and reliable performance for power supply decoupling and filtering in portable and consumer electronics designs.
- Manufacturer
- Panasonic
- Package
- Other
- Pin Count
- 2
- Lifecycle
- ACTIVE
- Datasheet
- EEE-HA1C471P Datasheet PDF
- Category
- Capacitor Polarised
- Price
- From $0.1795(MOQ 10)
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 470 µF capacitance at 16 V rating for effective power rail decoupling in SMD designs
- Low ESR construction for reduced power loss in high-ripple filtering applications
- Compact SMD chip package enables high-density PCB layouts without through-hole assembly
- Panasonic HA series reliability for long operational life in consumer and industrial electronics
- Wide operating temperature range suitable for commercial and industrial thermal environments
Applications
The EEE-HA1C471P is commonly used in smartphone chargers, DC-DC converters, and portable consumer electronics where surface-mount aluminum electrolytic capacitors with 470 µF at 16 V are needed for stable power rail filtering. Its low-ESR, chip-format construction supports high-frequency ripple suppression in switching power supplies and motor controller output stages. The part is also specified in industrial control boards and IoT gateway power modules requiring compact capacitive energy storage.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What capacitance and voltage rating does EEE-HA1C471P provide, and which DC-DC converter topologies benefit most from it?
The EEE-HA1C471P is rated at 470 µF and 16 V. This combination is well suited for output filtering in step-down (buck) DC-DC converters operating from 5 V to 12 V rails, where large capacitance smooths switching ripple and the 16 V rating provides adequate voltage headroom above the nominal output.
How does the SMD package of EEE-HA1C471P compare to radial through-hole alternatives in board density terms?
The EEE-HA1C471P uses a chip SMD package, which eliminates lead holes and reduces component height compared to radial through-hole 470 µF parts. SMD mounting allows placement on both sides of the PCB, enabling higher component density in compact devices such as wearables, USB power adapters, and handheld instruments.
Is EEE-HA1C471P RoHS compliant, and what lead-free soldering profile should be used during assembly?
The EEE-HA1C471P is a lead-free, RoHS-compliant SMD aluminum electrolytic capacitor. During reflow assembly, a peak solder temperature not exceeding 260°C for under 10 seconds is typically recommended for aluminum electrolytic capacitors to avoid damaging the electrolyte, consistent with IPC/JEDEC J-STD-020 MSL guidelines.
When replacing EEE-HA1C471P in a repair or redesign, what key parameters must a substitute capacitor match?
A direct substitute must match 470 µF capacitance, 16 V voltage rating, and the same SMD package dimensions. ESR at 100 kHz, ripple current rating, and operating temperature range—typically -40°C to +85°C or higher—must also be verified to ensure the replacement performs identically in the original power supply filtering circuit.
Related Guides
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
Why Buy from FindMyChip
About Panasonic
Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 10+ | $0.5400 | $5.40 |
| 50+ | $0.4068 | $20.34 |
| 100+ | $0.3646 | $36.46 |
| 2000+ | $0.1888 | $377.64 |
| 4000+ | $0.1838 | $735.28 |
| 8000+ | $0.1795 | $1436.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”