EEA-GA1A101 Panasonic Capacitor Polarised (Capacitor, Polarized Radial Diameter) In Stock
Panasonic EEA-GA1A101 is a radial-leaded aluminium electrolytic capacitor rated at 10 V, 100 µF in a compact 6.3 × 7 mm body with 2.5 mm lead spacing. It delivers reliable bulk capacitance for power filtering and decoupling in consumer and industrial electronics. Available from stock worldwide with RoHS-compliant construction.
- Manufacturer
- Panasonic
- Package
- Capacitor, Polarized Radial Diameter
- Pin Count
- 2
- Lifecycle
- ACTIVE
- Datasheet
- EEA-GA1A101 Datasheet PDF
- Category
- Capacitor Polarised
- Price
- From $0.0590(MOQ 1)
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 100 µF capacitance at 10 V in a compact 6.3 × 7 mm radial body with 2.5 mm lead pitch for through-hole designs
- Aluminium electrolytic construction provides high capacitance density suitable for power supply filtering and energy storage
- Panasonic GA series reliability with long-life low-ESR electrolyte optimized for ripple current handling in switching power supplies
Applications
The EEA-GA1A101 is widely used as a bulk decoupling capacitor on 5 V and 9 V DC power rails in consumer electronics, set-top boxes, and audio equipment where 100 µF smoothing is needed in a compact radial through-hole footprint. It is also suitable for output filtering in linear regulators and low-voltage switching converters where a 10 V rating provides adequate voltage margin above the 5 V bus. Its 6.3 × 7 mm form factor fits standard PCB layouts that accept common radial electrolytic capacitor footprints.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What are the key electrical ratings of the EEA-GA1A101 and which power supply rails is it suited for?
The EEA-GA1A101 is rated at 10 V with 100 µF capacitance. It is appropriate for 5 V DC rails where the 10 V rating provides a 2x voltage derating margin, as well as for 3.3 V and lower-voltage logic supply filtering where a 100 µF bulk capacitor reduces output voltage ripple below acceptable thresholds.
How does the 6.3 × 7 mm body size of the EEA-GA1A101 compare to standard electrolytic capacitor footprints?
The EEA-GA1A101 uses a 6.3 mm diameter by 7 mm height body with a 2.5 mm lead pitch, which is a widely used through-hole footprint compatible with standard PCB pad layouts for radial electrolytic capacitors. This compact 6.3 mm diameter is smaller than the 8 mm or 10 mm bodies used by higher-capacitance or higher-voltage units, making board placement more flexible.
For a 5 V switching regulator output filter, what ripple current capability should I verify for the EEA-GA1A101?
When using the EEA-GA1A101 on a 5 V switching converter output, designers should consult the Panasonic GA series datasheet for the rated ripple current at 100 kHz and 105°C. The 100 µF, 10 V aluminium electrolytic specification in this series typically supports ripple currents in the range of 100 mA to 300 mA, depending on ESR and frequency, and derating to 70% of maximum ripple current is recommended for long-life designs.
Is the EEA-GA1A101 a suitable replacement for other 100 µF 10 V radial electrolytic capacitors from other manufacturers?
Yes, the EEA-GA1A101 can typically replace other 100 µF, 10 V radial electrolytic capacitors with a 2.5 mm lead pitch and 6.3 mm diameter, such as Nichicon UUD1A101MCL1GS or Rubycon 10ZL100MEFC6.3X11, provided the replacement meets or exceeds the ESR, ripple current, and temperature rating requirements of the target circuit.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About Panasonic
Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.3700 | $0.37 |
| 10+ | $0.1780 | $1.78 |
| 100+ | $0.1300 | $13.00 |
| 1000+ | $0.1015 | $101.53 |
| 2000+ | $0.0716 | $143.20 |
| 4000+ | $0.0590 | $236.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”