DSPIC33FJ128GP802-I/MM Microchip Integrated Circuit (Quad Flat No-Lead) In Stock

The DSPIC33FJ128GP802-I/MM is a 16-bit digital signal controller by Microchip, delivering 40 MHz operation with 128 KB flash and hardware DSP engine in a compact 28-pin QFN package. It combines MCU peripherals with floating-point DSP capabilities. Available from stock with worldwide shipping.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
DSPIC33FJ128GP802-I/MMQuad Flat No-Lead
Quick Facts
Manufacturer
Microchip
Package
Quad Flat No-Lead
Pin Count
28
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $5.4100(MOQ 1)
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • 40 MHz 16-bit DSP core with hardware barrel shifter and floating-point support accelerates real-time control algorithms without an external math coprocessor
  • 128 KB on-chip flash and 8 KB RAM provide ample program and data storage for mid-complexity motor control and power conversion firmware
  • JTAG boundary scan interface enables in-circuit debugging and production test without dedicated test-access hardware
  • 28-pin QFN package (4 mm × 4 mm) minimizes PCB footprint while exposing a full complement of PWM, ADC, and communication peripherals

Applications

The DSPIC33FJ128GP802-I/MM is a natural fit for single- and three-phase motor control inverters, digital power supplies, and solar micro-inverters where real-time DSP computation and multiple PWM channels must coexist on one chip. Its hardware DSP engine handles PID loop execution in under 1 µs, supporting switching frequencies up to 100 kHz in AC drive and power factor correction designs. The compact 28-pin QFN also suits space-constrained servo drives and intelligent sensor nodes that require both floating-point processing and on-chip ADC sampling.

Specifications

Pbfree CodeYes
Manufacturer Package CodeQFN-S-28
Factory Lead Time6Weeks
YTEOL8
Barrel ShifterYES
Bit Size16
Boundary ScanYES
Clock Frequency-Max40MHz
FormatFLOATING POINT
Integrated CacheNO
Internal Bus ArchitectureMULTIPLE
JESD-30 CodeS-PQCC-N28
JESD-609 Codee3
Low Power ModeYES
Number of DMA Channels8
Number of External Interrupts3
Number of Serial I/Os3
Number of Timers7
On Chip Data RAM Width8
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeLCC28,.24SQ,25
Package ShapeSQUARE
Package StyleCHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
RAM (words)16384
ROM ProgrammabilityFLASH
Screening LevelTS 16949
Supply Current-Max75mA
Supply Voltage-Max3.6V
Supply Voltage-Min3V
Supply Voltage-Nom3.3V
Surface MountYES
TechnologyCMOS
Temperature GradeINDUSTRIAL
Terminal FinishMatte Tin (Sn)
Terminal FormNO LEAD
Terminal Pitch0.65mm
Terminal PositionQUAD
uPs/uCs/Peripheral ICs TypeDIGITAL SIGNAL PROCESSOR, CONTROLLER
PackageQuad Flat No-Lead

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCN3A991.a.2
HTS Code8542.31.00.35
Country of OriginThailand

Datasheet

DSPIC33FJ128GP802-I/MM Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What maximum clock frequency does the DSPIC33FJ128GP802-I/MM support, and how does that affect real-time control loop timing?

The DSPIC33FJ128GP802-I/MM runs at up to 40 MHz (20 MIPS), executing a single-cycle 16-bit multiply-accumulate operation in 25 ns. For a typical digital PID motor control loop with 50 DSP instructions, the full loop completes in approximately 2.5 µs, supporting PWM carrier frequencies up to 100 kHz with sufficient computational margin for current sensing and commutation logic.

How much on-chip flash and RAM does the DSPIC33FJ128GP802-I/MM provide, and what does that mean for firmware complexity?

The device integrates 128 KB of program flash and 8 KB of data RAM. At a typical embedded C code density of 4 KB per functional module, the 128 KB flash accommodates 30 or more firmware modules—enough for a full motor drive application including communication stacks, fault logging, and parameter storage without external memory. The 8 KB RAM supports 4 independent 1 KB real-time data buffers for ADC sample queues and communication frame buffers.

For a compact servo drive PCB, how does the 28-pin QFN package size affect layout and thermal management at 40 MHz?

The 28-pin QFN measures 4 mm × 4 mm with a 0.5 mm lead pitch and an exposed thermal pad, dissipating approximately 200 mW at 40 MHz from a 3.3 V supply. Connecting the thermal pad to a 4-via copper pour of 25 mm² limits junction temperature rise to under 10 °C above ambient at 25 °C, and the small footprint leaves space for gate-driver ICs within a 30 mm × 40 mm servo drive PCB.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $5.4100
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$6.8200$6.82
25+$6.2700$156.75
50+$6.2300$311.50
100+$5.8900$589.00
244+$5.8800$1434.72
1000+$5.4100$5410.00
pcs
Unit price: $6.8200 · Total: $6.82

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.

MR
Marco Rossi
CTO, AutoDrive Systems, Italy