DSPIC33EP512MC806-I/PT Microchip Integrated Circuit (Quad Flat Packages) In Stock
The DSPIC33EP512MC806-I/PT is a 16-bit dsPIC33E DSC with 512 KB Flash, 60 MHz maximum clock, motor control peripherals, and an integrated ADC in a 64-pin TQFP package. It includes a hardware barrel shifter, boundary scan, and DSP engine optimised for real-time motor control algorithms. Available from stock with worldwide shipping.
- Manufacturer
- Microchip
- Package
- Quad Flat Packages
- Pin Count
- 64
- Lifecycle
- ACTIVE
- Datasheet
- DSPIC33EP512MC806-I/PT Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $6.4100(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of DSPIC33EP512MC806-I/PT?
- 60 MHz 16-bit dsPIC33E DSP core with hardware barrel shifter executes real-time FOC and SVPWM motor-control algorithms without software shift loops
- 512 KB on-chip Flash provides ample program storage for complex motor control firmware, communication stacks, and calibration tables in a single device
- Integrated multi-channel ADC with simultaneous sampling capability enables precise current and voltage sensing for closed-loop motor control at full 60 MHz throughput
- Motor control-specific PWM module with dead-time insertion and fault protection simplifies 3-phase inverter gate-driver design for BLDC and PMSM drives
What is DSPIC33EP512MC806-I/PT used for?
The DSPIC33EP512MC806-I/PT is purpose-built for high-performance motor drive applications such as brushless DC and permanent-magnet synchronous motor controllers in industrial automation, HVAC compressors, and electric power steering systems requiring real-time field-oriented control at up to 60 MHz. Its combination of 512 KB Flash, a DSP core, and dedicated motor control PWM peripherals allows engineers to implement sensor-based or sensorless FOC algorithms with CAN or UART communication interfaces on a single 64-pin device. The 64-pin TQFP package also provides enough I/O for multi-axis applications where a second motor channel or encoder input is needed alongside the primary drive signals.
What are the specifications of DSPIC33EP512MC806-I/PT?
| Manufacturer Package Code | TQFP-64 |
| Factory Lead Time | 9Weeks |
| YTEOL | 14 |
| Has ADC | YES |
| Barrel Shifter | YES |
| Bit Size | 16 |
| Boundary Scan | YES |
| CPU Family | DSPIC33 |
| Clock Frequency-Max | 60MHz |
| DAC Channels | NO |
| DMA Channels | YES |
| Format | FLOATING POINT |
| Integrated Cache | NO |
| Internal Bus Architecture | MULTIPLE |
| JESD-30 Code | S-PQFP-G64 |
| JESD-609 Code | e3 |
| Low Power Mode | YES |
| Number of DMA Channels | 15 |
| Number of External Interrupts | 5 |
| Number of I/O Lines | 53 |
| Number of Timers | 9 |
| On Chip Data RAM Width | 8 |
| On Chip Program ROM Width | 8 |
| PWM Channels | YES |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TQFP64,.47SQ |
| Package Shape | SQUARE |
| Package Style | FLATPACK, THIN PROFILE, FINE PITCH |
| Peak Reflow Temperature (Cel) | 260 |
| RAM (bytes) | 53248 |
| RAM (words) | 53248 |
| ROM (words) | 548864 |
| ROM Programmability | FLASH |
| Screening Level | TS-16949 |
| Speed | 70MHz |
| Supply Current-Max | 320mA |
| Supply Voltage-Max | 3.6V |
| Supply Voltage-Min | 3V |
| Supply Voltage-Nom | 3.3V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Terminal Position | QUAD |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, CONTROLLER |
| Package | Quad Flat Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 3 |
| ECCN | 3A991.a.2 |
| HTS Code | 8542.31.00.35 |
| Country of Origin | Thailand |
Where can I find the DSPIC33EP512MC806-I/PT datasheet?
DSPIC33EP512MC806-I/PT Datasheet DownloadOfficial datasheet from Microchip
What are equivalent replacements for DSPIC33EP512MC806-I/PT?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What maximum clock speed does the DSPIC33EP512MC806-I/PT support, and how does this affect motor control loop bandwidth?
The DSPIC33EP512MC806-I/PT operates at up to 60 MHz (70 MIPS effective throughput with its 16-bit DSP core). This allows a FOC current control loop executing 500 instructions per sample to run at a 140 kHz sampling rate, which is sufficient for achieving a current loop bandwidth above 10 kHz in a 20 kHz PWM switching frequency motor drive, meeting the requirements of high-performance servo and compressor applications.
How much Flash memory does the DSPIC33EP512MC806-I/PT contain, and what can a developer store in that space?
The device contains 512 KB of on-chip Flash program memory. For a typical embedded motor controller, 512 KB easily accommodates a full FOC firmware stack of around 50 KB, a Modbus RTU communication stack of 10 KB, bootloader code of 8 KB, and parameter calibration tables of 16 KB, leaving over 400 KB of headroom for application-specific logic, diagnostics, and future feature additions without requiring external Flash storage.
Which motor topologies benefit most from the dsPIC33EP512MC806-I/PT's dedicated PWM and ADC peripherals?
3-phase BLDC and PMSM motors benefit most because the device's motor control PWM module generates complementary 3-phase outputs with hardware dead-time insertion of 1 ns to 16 µs, eliminating shoot-through without software overhead. The simultaneous-sampling ADC captures phase currents at all 3 measurement points in a single PWM cycle, enabling synchronous current reconstruction required for accurate field-oriented control torque estimation at PWM frequencies up to 20 kHz.
Is the DSPIC33EP512MC806-I/PT suitable for multi-axis motor control, and how many I/O pins are available?
Yes. The 64-pin TQFP package provides up to 53 general-purpose I/O pins after accounting for power, clock, and programming pins. A dual-axis application can allocate 6 PWM outputs and 6 ADC inputs per axis, leaving over 30 pins for encoder quadrature inputs (2-wire per axis), CAN bus, UART, SPI, and digital I/O signals, making the device a practical single-chip solution for 2-axis servo amplifiers in CNC and robotics systems.
Related Guides
How to Choose the ICL7660ACPAZ or an Alternative: Charge-Pump Selection Guide
Choose the ICL7660ACPAZ or a compatible charge-pump alternative by comparing load, droop, ripple, package, and sourcing requirements.
Jul 26, 2026
150141VS73100 Violet SMD LED Indicator Design Guide
Design the 150141VS73100 violet 3528 SMD LED for reliable indication with current, thermal, optical, PCB, PWM, and sourcing guidance.
Jul 26, 2026
LM5156QDSSRQ1 Automotive Boost Controller Design Guide
Practical LM5156QDSSRQ1 automotive boost design guidance covering operating points, magnetics, MOSFET stress, compensation, layout, and validation.
Jul 24, 2026
EEEFK1H470XP Selection Guide: Choosing a 50 V SMD Aluminum Capacitor
Choose EEEFK1H470XP and related 50 V SMD aluminum capacitors by capacitance, ripple current, ESR, life, and layout constraints.
Jul 24, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $6.4100 | $6.41 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit