DSPIC30F6011A-30I/PT Microchip Integrated Circuit (Quad Flat Packages) In Stock
Microchip DSPIC30F6011A-30I/PT is a 16-bit dsPIC digital signal controller with 132 kB Flash, up to 40 MHz clock, hardware barrel shifter, and 64-pin TQFP package, suited for motor control, power conversion, and industrial embedded control applications.
- Manufacturer
- Microchip
- Package
- Quad Flat Packages
- Pin Count
- 64
- Lifecycle
- ACTIVE
- Datasheet
- DSPIC30F6011A-30I/PT Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $9.3200(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of DSPIC30F6011A-30I/PT?
- 40 MHz 16-bit dsPIC30F fixed-point DSP core with hardware barrel shifter for real-time motor control algorithms
- 132 kB on-chip Flash with 64-pin TQFP-64 package supporting rich peripheral sets including CAN, UART, SPI, and I2C
- Wide supply voltage from 2.5 V at 10 MHz up to full-speed operation, enabling low-power portable designs
- Motor control PWM and QEI peripherals enabling closed-loop servo and brushless motor drive without external ICs
What is DSPIC30F6011A-30I/PT used for?
The DSPIC30F6011A-30I/PT targets digital motor control, switch-mode power supply management, and industrial automation applications requiring 16-bit DSP performance at up to 40 MHz. Its 132 kB Flash and rich peripheral set including CAN bus interface support complex control algorithms in multi-axis motion controllers and PLC I/O modules. The 64-pin TQFP package accommodates all peripherals in a compact footprint suitable for inverter drive boards and smart power management units.
What are the specifications of DSPIC30F6011A-30I/PT?
| Pbfree Code | Yes |
| Manufacturer Package Code | TQFP-64 |
| Factory Lead Time | 7Weeks |
| YTEOL | 9 |
| Additional Feature | ALSO OPERATES AT 2.5V MINIMUM SUPPLY AT 10 MHZ |
| Barrel Shifter | YES |
| Bit Size | 16 |
| Boundary Scan | NO |
| Clock Frequency-Max | 40MHz |
| Format | FIXED POINT |
| Internal Bus Architecture | MULTIPLE |
| JESD-30 Code | S-PQFP-G64 |
| JESD-609 Code | e3 |
| Low Power Mode | YES |
| On Chip Program ROM Width | 24 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TQFP64,.47SQ |
| Package Shape | SQUARE |
| Package Style | FLATPACK, THIN PROFILE, FINE PITCH |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| ROM Programmability | FLASH |
| Screening Level | TS 16949 |
| Supply Current-Max | 250mA |
| Supply Voltage-Max | 5.5V |
| Supply Voltage-Min | 3V |
| Supply Voltage-Nom | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Terminal Position | QUAD |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, CONTROLLER |
| Package | Quad Flat Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 3 |
| ECCN | 3A991.A.2 |
| HTS Code | 8542.31.00.01 |
| Country of Origin | Philippines, Thailand |
Where can I find the DSPIC30F6011A-30I/PT datasheet?
DSPIC30F6011A-30I/PT Datasheet DownloadOfficial datasheet from Microchip
What are equivalent replacements for DSPIC30F6011A-30I/PT?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How does the DSPIC30F6011A-30I/PT's 40 MHz clock enable real-time motor control compared to standard 8-bit MCUs?
At 40 MHz with a 16-bit fixed-point DSP core and hardware barrel shifter, the DSPIC30F6011A-30I/PT executes multiply-accumulate operations in a single cycle, enabling FOC current loop execution in under 5 µs per sample. Standard 8-bit MCUs at 20 MHz require multiple clock cycles per multiply, making 4 kHz to 20 kHz current loop bandwidths impractical without co-processors.
For designs requiring CAN bus communication, what does the 64-pin TQFP DSPIC30F6011A-30I/PT offer beyond motor control?
The DSPIC30F6011A-30I/PT includes a CAN 2.0B controller with 16 message buffers alongside motor control PWM and QEI in the 64-pin TQFP-64 footprint, enabling a single-chip solution for CAN-connected servo drives and industrial automation nodes. The 132 kB Flash accommodates both the control algorithm and the CANopen or J1939 protocol stack without external memory.
What minimum supply voltage does DSPIC30F6011A-30I/PT support and which low-power applications benefit from this?
The DSPIC30F6011A-30I/PT operates at a minimum 2.5 V supply at up to 10 MHz, reducing quiescent current and enabling use in 3 V battery-powered instruments and handheld diagnostic tools. At full 5 V supply it scales to 40 MHz for maximum throughput, giving designers a flexible trade-off between processing speed and power consumption in the same device.
How much code can a developer fit in the DSPIC30F6011A-30I/PT Flash, and is 132 kB adequate for complex industrial firmware?
132 kB of program Flash is sufficient to hold a full FOC motor control library, a Modbus RTU stack, and a calibration routine simultaneously, with typical compiled C code for each module occupying 10 kB to 30 kB. Developers targeting PLC analog I/O modules or inverter drives routinely fit complete application firmware within 80 kB, leaving 50 kB headroom for future feature expansion or bootloader integration.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $12.9100 | $12.91 |
| 25+ | $11.7200 | $293.00 |
| 100+ | $10.6600 | $1066.00 |
| 1000+ | $9.7700 | $9770.00 |
| 5000+ | $9.3200 | $46600.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit