DSPIC30F4011-20I/MLAlternatives & Equivalent Parts
About DSPIC30F4011-20I/ML
DSPIC30F4011-20I/ML is a Integrated Circuit component manufactured by Microchip. It comes in a Quad Flat No-Lead package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for DSPIC30F4011-20I/ML — response within 24 hours.
Specification Comparison
| Parameter | DSPIC30F4011-20I/MLSource | CRCW25121M00FKEG | EEUED2W100 | HY1-5V | TLC5620CN |
|---|---|---|---|---|---|
| Manufacturer | Microchip | Vishay | Panasonic | Panasonic | Texas Instruments |
| Package Type | Quad Flat No-Lead | Resistor Chip | Capacitor, Polarized Radial Diameter | Other | Dual-In-Line Packages |
| Pin Count | 44 | 2 | 2 | 6 | 14 |
| Temperature Range | -40.0°C ~ 85.0°C | -55.0°C ~ 155.0°C | -25.0°C ~ 105.0°C | -40.0°C ~ 70.0°C | ~ 70.0°C |
| Price | $5.9500 | $0.0600 | $0.4490 | $2.1900 | $4.1300 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | ACTIVE | ACTIVE | ACTIVE | OBSOLETE | ACTIVE |
| Electrical Parameters | |||||
| Pbfree Code | Yes | Yes | Yes | Yes | Yes |
| Manufacturer Package Code | QFN-44 | — | — | — | — |
| Factory Lead Time | 5 Weeks | — | 21 Weeks | — | — |
| YTEOL | 9 | 10 | 6 | 0 | 15 |
| Additional Feature | ALSO OPERATES AT 2.5V MINIMUM SUPPLY AT 7.5 MHZ | RATED AC VOLTAGE (V): 500 | — | — | — |
| Barrel Shifter | YES | — | — | — | — |
| Bit Size | 16 | — | — | — | — |
| Boundary Scan | YES | — | — | — | — |
| Clock Frequency-Max | 40 MHz | — | — | — | — |
| Format | FIXED POINT | — | — | — | — |
| Internal Bus Architecture | MULTIPLE | — | — | — | — |
| JESD-30 Code | S-PQCC-N44 | — | — | — | R-PDIP-T14 |
| JESD-609 Code | e3 | — | e2 | — | e4 |
| Low Power Mode | YES | — | — | — | — |
| On Chip Program ROM Width | 24 | — | — | — | — |
| Package Body Material | PLASTIC/EPOXY | — | — | — | PLASTIC/EPOXY |
| Package Equivalence Code | LCC44,.31SQ,25 | — | — | — | DIP14,.3 |
| Package Shape | SQUARE | — | CYLINDRICAL PACKAGE | — | RECTANGULAR |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | SMT | Radial | — | IN-LINE |
| Peak Reflow Temperature (Cel) | 260 | — | — | — | — |
| Qualification Status | Not Qualified | — | — | — | Not Qualified |
| ROM Programmability | FLASH | — | — | — | — |
| Screening Level | TS 16949 | — | — | — | — |
| Supply Voltage-Max | 5.5 V | — | — | — | — |
| Supply Voltage-Min | 4.5 V | — | — | — | — |
| Supply Voltage-Nom | 5 V | — | — | — | 5 V |
| Surface Mount | YES | YES | NO | NO | NO |
| Technology | CMOS | METAL GLAZE/THICK FILM | — | — | CMOS |
| Temperature Grade | INDUSTRIAL | — | — | — | COMMERCIAL |
| Terminal Finish | Matte Tin (Sn) | Tin (Sn) - with Nickel (Ni) barrier | Tin/Copper (Sn/Cu) | Silver/Gold (Ag/Au) | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Form | NO LEAD | — | — | — | THROUGH-HOLE |
| Terminal Pitch | 0.65 mm | — | 5 mm | — | 2.54 mm |
| Terminal Position | QUAD | — | — | — | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 40 | — | — | — | — |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, CONTROLLER | — | — | — | — |
| Reach Compliance Code | — | Compliant | Compliant | — | — |
| Construction | — | Rectangular | — | — | — |
| Mounting Feature | — | SURFACE MOUNT | THROUGH HOLE MOUNT | THROUGH HOLE-STRAIGHT | — |
| Package Height | — | 0.6 mm | — | — | — |
| Package Length | — | 6.3 mm | — | — | — |
| Package Width | — | 3.15 mm | — | — | — |
| Packing Method | — | TR, Blister, 7 Inch | BULK | BOX; TUBE | — |
| Rated Power Dissipation (P) | — | 1 W | — | — | — |
| Rated Temperature | — | 70 °C | — | — | — |
| Reference Standard | — | AEC-Q200 | — | CSA; UL | — |
| Resistance | — | 1000000 Ω | — | — | — |
| Resistor Type | — | FIXED RESISTOR | — | — | — |
| Size Code | — | 2512 | — | — | — |
| Terminal Shape | — | WRAPAROUND | WIRE | — | — |
| Tolerance | — | 1% | — | — | — |
| Working Voltage | — | 500 V | — | — | — |
| Capacitance | — | — | 10 µF | — | — |
| Capacitor Type | — | — | ALUMINUM ELECTROLYTIC CAPACITOR | — | — |
| Diameter | — | — | 12.5 mm | — | — |
| Dielectric Material | — | — | ALUMINUM (WET) | — | — |
| Leakage Current | — | — | 0.28 mA | — | — |
| Negative Tolerance | — | — | 20% | — | — |
| Polarity | — | — | POLARIZED | — | — |
| Positive Tolerance | — | — | 20% | — | — |
| Rated (DC) Voltage (URdc) | — | — | 450 V | — | — |
| Ripple Current | — | — | 140 mA | — | — |
| Tan Delta | — | — | 0.24 | — | — |
| Body Breadth | — | — | — | 7.4 mm | — |
| Body Height | — | — | — | 10.1 mm | — |
| Body Length or Diameter | — | — | — | 12 mm | — |
| Coil Current(DC)-Max | — | — | — | 0.03 A | — |
| Coil Operate Voltage(DC) | — | — | — | 3.75 V | — |
| Coil Power | — | — | — | 150 mW | — |
| Coil Release Voltage(DC) | — | — | — | 0.5 V | — |
| Coil Resistance | — | — | — | 166 Ω | — |
| Coil Voltage(DC)-Max | — | — | — | 5 V | — |
| Coil Voltage-Nom | — | — | — | 5 V | — |
| Coil/Input Supply Type | — | — | — | DC | — |
| Contact Current(DC)-Max | — | — | — | 1 A | — |
| Contact (DC) Max Power Rating R Load | — | — | — | 30W@60VDC | — |
| Contact (DC) Max Rating R Load | — | — | — | 1A@30VDC | — |
| Contact Resistance | — | — | — | 100 mΩ | — |
| Contact Voltage(DC)-Max | — | — | — | 30 V | — |
| Contact/Output Supply Type | — | — | — | DC | — |
| Electrical Life | — | — | — | 100000 Cycle(s) | — |
| End Contact Material | — | — | — | Silver | — |
| End Contact Plating | — | — | — | GOLD | — |
| Input Switching Control Type | — | — | — | Random | — |
| Insulation Resistance | — | — | — | 100000000 Ω | — |
| Operate Time | — | — | — | 5 ms | — |
| Physical Dimension | — | — | — | 12mm x 7.4mm x 10.1mm | — |
| Relay Action | — | — | — | MOMENTARY | — |
| Relay Form | — | — | — | 1 FORM C | — |
| Relay Function | — | — | — | SPDT | — |
| Relay Type | — | — | — | POWER/SIGNAL RELAY | — |
| Release Time | — | — | — | 4 ms | — |
| Terminal Length | — | — | — | 0.003500127000254001 inch | — |
| Termination Type | — | — | — | SOLDER | — |
| Analog Output Voltage-Max | — | — | — | — | 7 V |
| Converter Type | — | — | — | — | D/A CONVERTER |
| Input Bit Code | — | — | — | — | BINARY |
| Input Format | — | — | — | — | SERIAL |
| Linearity Error-Max (EL) | — | — | — | — | 0.3906% |
| Number of Bits | — | — | — | — | 8 |
| Number of Functions | — | — | — | — | 1 |
| Sample Rate | — | — | — | — | 0.048 MHz |
| Settling Time-Max | — | — | — | — | 10 µs |
| Settling Time-Nom (tstl) | — | — | — | — | 10 µs |
| Supply Current-Max | — | — | — | — | 2 mA |
| ## TLC5620CN Alternates Showing results | — | — | — | — | Image |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for DSPIC30F4011-20I/ML — response within 24 hours.
Quick Links
Why Look for Alternatives?
Finding alternatives for DSPIC30F4011-20I/ML is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating DSPIC30F4011-20I/ML replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for DSPIC30F4011-20I/ML. Get expert recommendations within 24 hours.
FAQ
What is equivalent to DSPIC30F4011-20I/ML?
Known equivalents for DSPIC30F4011-20I/ML include CRCW25121M00FKEG, EEUED2W100, HY1-5V. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of DSPIC30F4011-20I/ML?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify DSPIC30F4011-20I/ML alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.