DSPIC30F2010-20E/MMG Microchip Integrated Circuit (Quad Flat No-Lead) In Stock
The Microchip DSPIC30F2010-20E/MMG is a 16-bit Digital Signal Controller (DSC) with a 40 MHz maximum clock, 12 KB flash memory, and 28 leads in a QFN package, targeting motor control and power conversion applications. It integrates a hardware multiplier-accumulator, ADC, and PWM modules for real-time DSP processing.
- Manufacturer
- Microchip
- Package
- Quad Flat No-Lead
- Pin Count
- 28
- Lifecycle
- CONTACT MANUFACTURER
- Datasheet
- DSPIC30F2010-20E/MMG Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 16-bit dsPIC30F DSC architecture with 40 MHz operation and hardware MAC unit for real-time DSP computation
- 12 KB on-chip flash program memory with barrel shifter for efficient bit-field operations in embedded control applications
- Integrated ADC and motor control PWM modules enabling direct single-chip implementation of BLDC and PMSM drive algorithms
- QFN-28 (MMG) compact package with extended industrial temperature range for space-constrained embedded motor drive designs
Applications
The DSPIC30F2010-20E/MMG is designed for digital motor control applications including BLDC, PMSM, and stepper motor drives, where its 16-bit DSP core and dedicated PWM outputs enable precise, real-time commutation and torque control algorithms running at up to 40 MHz. It is also used in switch-mode power supply control, UPS systems, and industrial inverter designs that benefit from hardware-accelerated floating-point DSP processing. The extended temperature range and compact QFN-28 package suit demanding automotive auxiliary and industrial field controller applications.
Specifications
| Pbfree Code | Yes |
| Has ADC | YES |
| Barrel Shifter | YES |
| Bit Size | 16 |
| Boundary Scan | NO |
| Clock Frequency-Max | 40MHz |
| DMA Channels | NO |
| Format | FLOATING POINT |
| Integrated Cache | NO |
| Internal Bus Architecture | MULTIPLE |
| JESD-30 Code | S-PQCC-N28 |
| JESD-609 Code | e3 |
| Low Power Mode | YES |
| Number of External Interrupts | 3 |
| Number of I/O Lines | 20 |
| Number of Timers | 3 |
| On Chip Data RAM Width | 8 |
| On Chip Program ROM Width | 24 |
| PWM Channels | YES |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | LCC28,.24SQ,25 |
| Package Shape | SQUARE |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
| Qualification Status | Not Qualified |
| RAM (words) | 512 |
| ROM Programmability | FLASH |
| Screening Level | TS 16949 |
| Speed | 20MHz |
| Supply Current-Max | 300mA |
| Supply Voltage-Max | 5.5V |
| Supply Voltage-Min | 3V |
| Supply Voltage-Nom | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.65mm |
| Terminal Position | QUAD |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, CONTROLLER |
| Package | Quad Flat No-Lead |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | 3A991.a.2 |
| HTS Code | 8542.31.00.35 |
| Country of Origin | Malaysia |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for DSPIC30F2010-20E/MMG:
Frequently Asked Questions
What processing speed and memory configuration does the DSPIC30F2010-20E/MMG offer for motor control firmware?
The DSPIC30F2010-20E/MMG operates at up to 20 MIPS effective throughput from its 40 MHz clock (due to 2-cycle instruction pipeline), paired with 12 KB of on-chip flash program memory and 512 bytes of data RAM. This is sufficient for running closed-loop FOC algorithms for PMSM motors at switching frequencies of 10 kHz to 20 kHz without exceeding available cycle budgets.
Which motor drive topologies are directly supported by the integrated PWM peripherals of the DSPIC30F2010-20E/MMG?
The motor control PWM module provides complementary output pairs with programmable dead-time insertion suitable for 3-phase half-bridge inverter topologies used in BLDC and PMSM drives. Combined with the 10-bit ADC providing simultaneous multi-channel sampling, the DSPIC30F2010-20E/MMG supports single-chip FOC control for motors on 12 V to 60 V bus rails in compact drives up to a few hundred watts.
When would a designer choose the DSPIC30F2010-20E/MMG over DSPIC30F4011 for a low-pin-count embedded application?
The DSPIC30F2010-20E/MMG in a 28-lead QFN package suits applications where board space is constrained and fewer than 28 I/O pins are needed, whereas the DSPIC30F4011 in a 40-pin DIP or TQFP package adds more PWM channels and ADC inputs for larger multi-axis or multi-phase motor drive designs. If the application fits within 12 KB of flash and 512 bytes of RAM at 40 MHz, the MMG package saves approximately 50% of PCB area versus the larger 40-pin package alternatives.
What does the extended temperature rating on the DSPIC30F2010-20E/MMG mean for industrial field device deployments?
The -E suffix designates the extended industrial temperature range of -40°C to +125°C, making the DSPIC30F2010-20E/MMG suitable for deployment in outdoor industrial controllers, HVAC motor drives, and automotive auxiliary systems where ambient temperatures far exceed the standard 0°C to 70°C commercial range. Operating at 125°C requires designers to verify that the 40 MHz clock frequency and flash endurance specifications remain within rated limits at temperature extremes, typically confirmed through Microchip's device-specific characterization data.
Related Guides
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
ADAQ7768-1 Design Guide for Precision Vibration and Dynamic Signal Measurement
Design ADAQ7768-1 precision data acquisition channels for vibration and dynamic sensing with the right bandwidth, reference, clock, and layout choices.
Jun 30, 2026
AD5204BRZ10 Design Guide for SPI-Controlled Gain and Offset Calibration
Design AD5204BRZ10 digital potentiometer calibration loops with bounded trim span, safe wiper current, clean SPI routing, and reliable startup codes.
Jun 30, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”