DS99R124AQSQ/NOPB Texas Instruments Integrated Circuit (Quad Flat No-Lead) In Stock
The DS99R124AQSQ/NOPB is a 1.2 Gbps deserializer with 1 differential input and 18-bit parallel output, supporting I2C configuration in a 48-pin WQFN (7x7 mm) package. RoHS-compliant and automotive-grade, it is available from stock worldwide for demanding high-speed interface applications.
- Manufacturer
- Texas Instruments
- Package
- Quad Flat No-Lead
- Pin Count
- 48
- Lifecycle
- ACTIVE
- Datasheet
- DS99R124AQSQ/NOPB Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $6.6900(MOQ 500)
- Temp Range
- -40.0°C to 105.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of DS99R124AQSQ/NOPB?
- 1.2 Gbps deserializer converting a single high-speed differential serial stream to 18-bit parallel data for display and imaging interfaces in automotive and industrial systems
- I2C-configurable control interface enabling flexible setup of data rate, channel mapping, and power modes without dedicated hardware configuration pins
- Compact 48-pin WQFN (7x7 mm) package with differential Schmitt trigger inputs for superior common-mode noise rejection in high-EMI environments
What is DS99R124AQSQ/NOPB used for?
The DS99R124AQSQ/NOPB is designed for automotive display and camera link applications where a single 1.2 Gbps serial data stream must be deserialized into an 18-bit parallel bus for display controllers or FPGA interfaces. It is also used in industrial imaging systems, medical display equipment, and high-speed data distribution boards requiring a compact, low-noise receiver with I2C control in a 7x7 mm footprint.
What are the specifications of DS99R124AQSQ/NOPB?
| Pbfree Code | Yes |
| Reach Compliance Code | Compliant |
| YTEOL | 15 |
| Differential Output | YES |
| Driver Number of Bits | 18 |
| High Level Input Current-Max | 0.000015A |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Interface IC Type | LINE DRIVER |
| Interface Standard | I2C |
| JESD-30 Code | S-XQCC-N48 |
| JESD-609 Code | e3 |
| Number of Functions | 18 |
| Out Swing-Min | 0.1V |
| Output Low Current-Max | 0.0005A |
| Output Polarity | COMPLEMENTARY |
| Package Body Material | UNSPECIFIED |
| Package Equivalence Code | LCC48,.27SQ,20 |
| Package Shape | SQUARE |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Screening Level | AEC-Q100 |
| Supply Current-Max | 80mA |
| Supply Voltage-Max | 1.89V |
| Supply Voltage-Min | 1.71V |
| Supply Voltage-Nom | 1.8V |
| Supply Voltage1-Max | 1.89V |
| Supply Voltage1-Min | 1.71V |
| Supply Voltage1-Nom | 1.8V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Terminal Position | QUAD |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Package | Quad Flat No-Lead |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 3 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.90 |
Where can I find the DS99R124AQSQ/NOPB datasheet?
DS99R124AQSQ/NOPB Datasheet DownloadOfficial datasheet from Texas Instruments
What are equivalent replacements for DS99R124AQSQ/NOPB?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the maximum data rate supported by the DS99R124AQSQ/NOPB deserializer?
The DS99R124AQSQ/NOPB supports a maximum serial data rate of 1.2 Gbps on its single differential input. This allows it to deserialize high-speed serial streams into an 18-bit parallel output bus, suitable for driving display controllers and FPGA interfaces in automotive and industrial imaging systems.
How is the DS99R124AQSQ/NOPB configured in a system design, and what interface does it use?
The DS99R124AQSQ/NOPB uses an I2C interface for configuration, allowing the host processor to set data rate, output mapping, and power modes via a standard 2-wire I2C bus. This eliminates the need for dedicated hardware configuration pins and simplifies PCB design in space-constrained automotive display module layouts.
Is the DS99R124AQSQ/NOPB qualified for automotive applications?
Yes, the DS99R124AQSQ/NOPB is designated with automotive qualification (indicated by the 'A' suffix in the part number and its YTEOL rating of 15 years). It is RoHS-compliant and Pb-free (NOPB suffix), meeting requirements for automotive display, camera, and ADAS modules operating in harsh thermal and EMI environments typical of in-vehicle systems.
What package does the DS99R124AQSQ/NOPB use and how does its footprint compare to larger LQFP alternatives?
The DS99R124AQSQ/NOPB is housed in a 48-pin WQFN measuring 7x7 mm, which is approximately 40% smaller in board area than a comparable 48-pin LQFP package (typically 9x9 mm). This compact footprint is advantageous for automotive display PCBs and camera modules where board space is at a premium and low-inductance ground connections improve high-speed signal integrity at 1.2 Gbps.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
More from Texas Instruments
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 500+ | $7.5200 | $3760.00 |
| 1000+ | $7.1100 | $7110.00 |
| 10000+ | $6.6900 | $66900.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit