DR125-2R2-RAlternatives & Equivalent Parts
About DR125-2R2-R
DR125-2R2-R is a Inductor component manufactured by Cooper Bussmann. It comes in a Inductors Precision Moulded package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 7 alternatives for DR125-2R2-R — response within 24 hours.
Specification Comparison
| Parameter | DR125-2R2-RSource | DR125-3R3-R | 219-2MST | ADP7142ARDZ-R7 | DFLS240-7 | MMSZ5233BS-7-F | MIC5211-LXYM6-TR | B82733F2112B001 |
|---|---|---|---|---|---|---|---|---|
| Manufacturer | Cooper Bussmann | Cooper Bussmann | CTS | Analog Devices | Diodes Inc. | Diodes Inc. | Microchip | EPCOS |
| Package Type | Inductors Precision Moulded | Inductors Precision Moulded | Other | Small Outline Packages | Other | Small Outline Diode | SOT23 (6-Pin) | Other |
| Pin Count | 2 | 2 | 4 | 8 | 2 | 2 | 6 | 4 |
| Temperature Range | — | — | -55.0°C ~ 85.0°C | — | -65.0°C ~ 125.0°C | -65.0°C ~ 150.0°C | — | -40.0°C ~ 125.0°C |
| Price | $0.4369 | $0.4525 | $0.2600 | $1.7078 | $0.1756 | $0.0195 | $0.6510 | $1.2100 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | — | — | ACTIVE | ACTIVE | ACTIVE | ACTIVE | ACTIVE | ACTIVE |
| Electrical Parameters | ||||||||
| Pbfree Code | — | — | Yes | No | No | Yes | — | — |
| Factory Lead Time | — | — | 4 Weeks | — | 12 Weeks | 12 Weeks | — | 12 Weeks |
| YTEOL | — | — | 8 | 10 | 6.1 | 7 | 8 | 6.9 |
| Actuator Length | — | — | 0.01 inch | — | — | — | — | — |
| Actuator Material | — | — | POLYETHYLENE | — | — | — | — | — |
| Actuator Type | — | — | MEDIUM | — | — | — | — | — |
| Additional Feature | — | — | APPROVAL: UL | — | HIGH RELIABILITY, LOW LEAKAGE CURRENT | — | — | — |
| Body Breadth | — | — | 6.55 mm | — | — | — | — | — |
| Body Height | — | — | 4.05 mm | — | — | — | — | — |
| Body Length or Diameter | — | — | 6.7 mm | — | — | — | — | — |
| Center Contact Material | — | — | BERYLLIUM COPPER | — | — | — | — | — |
| Center Contact Plating | — | — | GOLD | — | — | — | — | — |
| Contact Current(DC)-Max | — | — | 0.1 A | — | — | — | — | — |
| Contact (DC) Max Rating R Load | — | — | 0.1A@20VDC | — | — | — | — | — |
| Contact Function | — | — | ON-OFF | — | — | — | — | — |
| Contact Resistance | — | — | 0.025 mΩ | — | — | — | — | — |
| Contact Voltage(DC)-Max | — | — | 20 V | — | — | — | — | — |
| Dielectric Withstand Volts | — | — | 500VAC V | — | — | — | — | — |
| Electrical Life | — | — | 2000 Cycle(s) | — | — | — | — | — |
| End Contact Material | — | — | BERYLLIUM COPPER | — | — | — | — | — |
| End Contact Plating | — | — | GOLD | — | — | — | — | — |
| Housing Material | — | — | POLYETHYLENE | — | — | — | — | — |
| Insulation Resistance | — | — | 1000000000 Ω | — | — | — | — | — |
| Insulator Material | — | — | POLYETHYLENE | — | — | — | — | — |
| Mounting Feature | — | — | SURFACE MOUNT-STRAIGHT | — | — | — | — | — |
| Number of Switch Sections | — | — | 2 | — | — | — | — | — |
| Packing Method | — | — | TUBE | — | — | — | TR | Tray |
| Sealing | — | — | BOTTOM SEALED; TOP TAPE SEALED | — | — | — | — | — |
| Solderability | — | — | WAVE | — | — | — | — | — |
| Surface Mount | — | — | NO | YES | YES | YES | YES | NO |
| Switch Action | — | — | LATCHED | — | — | — | — | — |
| Switch Function | — | — | SPST | — | — | — | — | — |
| Switch Type | — | — | SLIDE DIP SWITCH | — | — | — | — | — |
| Termination Type | — | — | SOLDER | — | — | — | — | — |
| Manufacturer Package Code | — | — | — | RD-8-1 | POWERDI 123 | — | SOT-23-6 | — |
| Dropout Voltage1-Max | — | — | — | 0.42 V | — | — | 0.5 V | — |
| JESD-30 Code | — | — | — | R-PDSO-G8 | R-PDSO-F2 | R-PDSO-G2 | R-PDSO-G6 | — |
| JESD-609 Code | — | — | — | e3 | e3 | e3 | e4 | e3 |
| Number of Functions | — | — | — | 1 | — | — | 1 | 2 |
| Operating Temperature TJ-Max | — | — | — | 125 °C | — | — | 125 °C | — |
| Operating Temperature TJ-Min | — | — | — | -40 °C | — | — | -40 °C | — |
| Output Current1-Max | — | — | — | 0.2 A | — | — | 0.08 A | — |
| Output Voltage1-Max | — | — | — | 39.58 V | — | — | 3.432 V | — |
| Output Voltage1-Min | — | — | — | 1.2 V | — | — | 3.168 V | — |
| Package Body Material | — | — | — | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | — |
| Package Shape | — | — | — | RECTANGULAR | RECTANGULAR | RECTANGULAR | RECTANGULAR | — |
| Package Style | — | — | — | SMALL OUTLINE, HEAT SINK/SLUG | SMALL OUTLINE | SMALL OUTLINE | SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH | PCB Mount |
| Peak Reflow Temperature (Cel) | — | — | — | 260 | 260 | 260 | 260 | — |
| Regulator Type | — | — | — | ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR | — | — | FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR | — |
| Technology | — | — | — | CMOS | SCHOTTKY | ZENER | — | — |
| Terminal Finish | — | — | — | Matte Tin (Sn) - annealed | MATTE TIN | MATTE TIN | Nickel/Palladium/Gold (Ni/Pd/Au) | Tin (Sn) |
| Terminal Form | — | — | — | GULL WING | FLAT | GULL WING | GULL WING | — |
| Terminal Pitch | — | — | — | 1.27 mm | — | — | 0.95 mm | — |
| Terminal Position | — | — | — | DUAL | DUAL | DUAL | DUAL | — |
| Time@Peak Reflow Temperature-Max (s) | — | — | — | 30 | 30 | 30 | 40 | — |
| Application | — | — | — | — | GENERAL PURPOSE | — | — | — |
| Case Connection | — | — | — | — | CATHODE | — | — | — |
| Configuration | — | — | — | — | SINGLE | SINGLE | — | — |
| Diode Element Material | — | — | — | — | SILICON | SILICON | — | — |
| Diode Type | — | — | — | — | RECTIFIER DIODE | ZENER DIODE | — | — |
| Forward Voltage-Max (VF) | — | — | — | — | 0.58 V | — | — | — |
| Non-rep Pk Forward Current-Max | — | — | — | — | 40 A | — | — | — |
| Number of Elements | — | — | — | — | 1 | 1 | — | — |
| Number of Phases | — | — | — | — | 1 | — | — | — |
| Output Current-Max | — | — | — | — | 2 A | — | — | — |
| Qualification Status | — | — | — | — | Not Qualified | Not Qualified | Not Qualified | — |
| Rep Pk Reverse Voltage-Max | — | — | — | — | 40 V | — | — | — |
| Dynamic Impedance-Max | — | — | — | — | — | 7 Ω | — | — |
| Polarity | — | — | — | — | — | UNIDIRECTIONAL | — | — |
| Power Dissipation-Max | — | — | — | — | — | 0.2 W | — | — |
| Reference Voltage-Nom | — | — | — | — | — | 6 V | — | — |
| Voltage Tol-Max | — | — | — | — | — | 5% | — | — |
| Working Test Current | — | — | — | — | — | 20 mA | — | — |
| Reach Compliance Code | — | — | — | — | — | — | Compliant | — |
| Adjustability | — | — | — | — | — | — | FIXED | — |
| Dropout Voltage1-Nom | — | — | — | — | — | — | 0.25 V | — |
| Dropout Voltage2-Max | — | — | — | — | — | — | 0.5 V | — |
| Input Voltage Absolute-Max | — | — | — | — | — | — | 20 V | — |
| Input Voltage-Max | — | — | — | — | — | — | 16 V | — |
| Input Voltage-Min | — | — | — | — | — | — | 4.3 V | — |
| Line Regulation-Max | — | — | — | — | — | — | 0.19305% | — |
| Load Regulation-Max | — | — | — | — | — | — | 0.0165% | — |
| Number of Outputs | — | — | — | — | — | — | 2 | — |
| Output Current2-Max | — | — | — | — | — | — | 0.08 A | — |
| Output Voltage1-Nom | — | — | — | — | — | — | 3.3 V | — |
| Output Voltage2-Max | — | — | — | — | — | — | 5.2 V | — |
| Output Voltage2-Min | — | — | — | — | — | — | 4.8 V | — |
| Output Voltage2-Nom | — | — | — | — | — | — | 5 V | — |
| Package Equivalence Code | — | — | — | — | — | — | TSOP5/6,.11,37 | — |
| Voltage Tolerance-Max | — | — | — | — | — | — | 4% | — |
| ## MIC5211-LXYM6-TR Alternates Showing results | — | — | — | — | — | — | Image | — |
| Construction | — | — | — | — | — | — | — | Rectangular |
| Core Material | — | — | — | — | — | — | — | FERRITE |
| DC Resistance | — | — | — | — | — | — | — | 0.804 Ω |
| Inductance-Nom (L) | — | — | — | — | — | — | — | 47000 µH |
| Inductor Application | — | — | — | — | — | — | — | COMMON MODE CHOKE |
| Inductor Type | — | — | — | — | — | — | — | COMMON MODE CHOKE |
| Lead Length | — | — | — | — | — | — | — | 3.5 mm |
| Package Height | — | — | — | — | — | — | — | 14 mm |
| Package Length | — | — | — | — | — | — | — | 26.5 mm |
| Package Width | — | — | — | — | — | — | — | 24.8 mm |
| Rated Current-Max | — | — | — | — | — | — | — | 1.1 A |
| Reference Standard | — | — | — | — | — | — | — | EN; IEC; UL; VDE |
| Shape/Size Description | — | — | — | — | — | — | — | RECTANGULAR PACKAGE |
| Shielded | — | — | — | — | — | — | — | NO |
| Special Feature | — | — | — | — | — | — | — | INDUCTANCE IS MEASURED AT 0.1 MILLI AMPERE |
| Terminal Placement | — | — | — | — | — | — | — | DUAL IN-LINE |
| Terminal Shape | — | — | — | — | — | — | — | FLAT |
| Test Frequency | — | — | — | — | — | — | — | 0.01 MHz |
| Tolerance | — | — | — | — | — | — | — | 50% |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 7 alternatives for DR125-2R2-R — response within 24 hours.
Quick Links
suggested
suggested
suggested
suggested
suggested
Why Look for Alternatives?
Finding alternatives for DR125-2R2-R is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating DR125-2R2-R replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for DR125-2R2-R. Get expert recommendations within 24 hours.
FAQ
What is equivalent to DR125-2R2-R?
Known equivalents for DR125-2R2-R include DR125-3R3-R, 219-2MST, ADP7142ARDZ-R7. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of DR125-2R2-R?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify DR125-2R2-R alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.