DLPC900ZPC Texas Instruments Integrated Circuit (BGA) In Stock
DLPC900ZPC is a high-performance digital light processor controller from Texas Instruments in BGA-516 package. Supports up to 1080p resolution DMD arrays with flexible pattern sequences. From $50 in stock worldwide shipping.
- Manufacturer
- Texas Instruments
- Package
- BGA
- Pin Count
- 516
- Lifecycle
- OBSOLETE
- Datasheet
- DLPC900ZPC Datasheet PDF
- Category
- Integrated Circuit
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Supports up to 1080p resolution DMD spatial light modulator control
- Flexible structured light pattern sequence generation for 3D sensing applications
- High-speed binary pattern support at 4,000+ Hz frame rates
- Integrated DLPC900 controller with USB and parallel port interfaces
Applications
DLPC900ZPC is widely used in structured light 3D scanning systems for industrial inspection and robotics. It also serves as a core controller in medical imaging equipment, hyperspectral imaging, and maskless photolithography systems requiring precise DMD control.
Specifications
| Pbfree Code | Yes |
| YTEOL | 0 |
| Package | BGA |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8542.31.00.01 |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for DLPC900ZPC:
Frequently Asked Questions
What is the maximum binary pattern rate supported by DLPC900ZPC?
The DLPC900ZPC supports binary pattern rates of up to 4,000 Hz, making it suitable for high-speed structured light scanning. This 1-bit pattern mode allows capturing dynamic scenes with minimal motion blur across 3D sensing applications.
Which DMD resolutions are compatible with the DLPC900ZPC controller?
DLPC900ZPC supports DMD arrays up to 1080p (1920x1080 pixels) resolution. It is specifically designed for Texas Instruments' 0.7-inch and 0.95-inch DMD devices, enabling high-resolution structured light patterns at 8-bit grayscale or binary modes.
What package does DLPC900ZPC use and what are its thermal considerations?
DLPC900ZPC comes in a 516-ball BGA package measuring approximately 23x23 mm with 0.8 mm ball pitch. Operating temperature range is 0°C to 70°C for commercial grade. Proper thermal management using the exposed pad and PCB copper pours is recommended for sustained high-speed operation.
How does DLPC900ZPC connect to a host processor for pattern upload?
DLPC900ZPC uses a USB 2.0 high-speed interface (480 Mbps) or HDMI 1.4 input for pattern data transfer from a host processor. It also supports I2C control bus at 400 kHz for configuration registers, enabling flexible integration in embedded 3D imaging systems.
Related Guides
How to Choose a Panasonic FT SMD Aluminum Electrolytic Capacitor for 35 V Control Rails
Selection guide for EEEFT1V101AP and related Panasonic FT/FK SMD aluminum electrolytic capacitors on 35 V and lower control rails.
Jul 8, 2026
EEEFK1E470P Design Guide for 24 V Control-Board Hold-Up
Design EEEFK1E470P into 12 V and 24 V control boards with correct voltage derating, ripple checks, layout, and sourcing alternatives.
Jul 8, 2026
EEEFK1E470P Selection Guide for 47 uF SMD Aluminum Electrolytic Capacitors
Selection guidance for EEEFK1E470P and nearby Panasonic FK or FT SMD aluminum electrolytic capacitors for power-rail bulk decoupling.
Jul 7, 2026
EEEFT1V101AP Design Guide for SMD Aluminum Electrolytic Bulk Decoupling
Design guidance for using EEEFT1V101AP as an SMD aluminum electrolytic bulk capacitor in power-rail decoupling and hold-up networks.
Jul 7, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”