DLM11SN450HZ2LAlternatives & Equivalent Parts
About DLM11SN450HZ2L
DLM11SN450HZ2L is a Filter component manufactured by Murata Electronics. It comes in a Other package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 5 alternatives for DLM11SN450HZ2L — response within 24 hours.
Specification Comparison
| Parameter | DLM11SN450HZ2LSource | CRCW040268K0FKED | XPL2010-102MLB | STM32F302R8T6TR | MCP3464RT-E/NC | MSP430F2132IPW |
|---|---|---|---|---|---|---|
| Manufacturer | Murata Electronics | Vishay | COILCRAFT | STMicroelectronics | Microchip | Texas Instruments |
| Package Type | Other | Other | Other | Quad Flat Packages | Quad Flat No-Lead | Small Outline Packages |
| Pin Count | 4 | 2 | 2 | 64 | 20 | 28 |
| Temperature Range | -55.0°C ~ 125.0°C | -55.0°C ~ 155.0°C | -40.0°C ~ 125.0°C | -40.0°C ~ 85.0°C | -40.0°C ~ 125.0°C | -40.0°C ~ 85.0°C |
| Price | $0.0473 | $0.0015 | $0.7020 | $3.3159 | $3.4200 | $1.5300 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | ACTIVE | ACTIVE | OBSOLETE | ACTIVE | ACTIVE | ACTIVE |
| Electrical Parameters | ||||||
| Factory Lead Time | 12 Weeks | — | — | 13 Weeks | 8 Weeks | — |
| YTEOL | 8 | 13 | 0 | 9 | 19 | 15 |
| DC Resistance-Max | 0.88 Ω | — | — | — | — | — |
| Filter Type | DATA LINE FILTER | — | — | — | — | — |
| Height | 0.5 mm | — | — | — | — | — |
| Insulation Resistance-Min | 100 MΩ | — | — | — | — | — |
| Mounting Type | SURFACE MOUNT | — | — | — | — | — |
| Number of Functions | 2 | — | 1 | — | 1 | — |
| Output Impedance | 45 OHM Ω | — | — | — | — | — |
| Packing Method | TR, EMBOSSED, 7 INCH | TR, Paper, 7 Inch | TR | — | — | — |
| Rated Current | 0.1 A | — | — | — | — | — |
| Rated Voltage | 5 V | — | — | — | — | — |
| Screening Level | AEC-Q200 | — | — | — | — | — |
| Pbfree Code | — | Yes | Yes | — | — | Yes |
| Reach Compliance Code | — | Compliant | — | — | — | — |
| Additional Feature | — | RATED AC VOLTAGE (V): 50 | — | — | — | ALSO OPERATES AT 1.8 V AT 6 MHZ |
| Construction | — | Rectangular | Shielded | — | — | — |
| Mounting Feature | — | SURFACE MOUNT | — | — | — | — |
| Package Height | — | 0.35 mm | 1 mm | — | — | — |
| Package Length | — | 1 mm | 2 mm | — | — | — |
| Package Style | — | SMT | SMT | FLATPACK, LOW PROFILE, FINE PITCH | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
| Package Width | — | 0.5 mm | 1.9 mm | — | — | — |
| Rated Power Dissipation (P) | — | 0.063 W | — | — | — | — |
| Rated Temperature | — | 70 °C | — | — | — | — |
| Reference Standard | — | AEC-Q200 | AEC-Q200 | — | — | — |
| Resistance | — | 68000 Ω | — | — | — | — |
| Resistor Type | — | FIXED RESISTOR | — | — | — | — |
| Size Code | — | 0402 | — | — | — | — |
| Surface Mount | — | YES | YES | YES | YES | YES |
| Technology | — | METAL GLAZE/THICK FILM | — | CMOS | — | CMOS |
| Terminal Finish | — | Pure Matte Tin (Sn) - with Nickel (Ni) barrier | Tin/Silver/Copper - Matte Tin -with Nickel barrier | — | Matte Tin (Sn) | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Shape | — | WRAPAROUND | ONE SURFACE | — | — | — |
| Tolerance | — | 1% | 20% | — | — | — |
| Working Voltage | — | 50 V | — | — | — | — |
| Case/Size Code | — | — | 0808 | — | — | — |
| Core Material | — | — | COMPOSITE | — | — | — |
| DC Resistance | — | — | 0.089 Ω | — | — | — |
| Inductance-Nom (L) | — | — | 1 µ H | — | — | — |
| Inductor Application | — | — | POWER INDUCTOR | — | — | — |
| Inductor Type | — | — | GENERAL PURPOSE INDUCTOR | — | — | — |
| Rated Current-Max | — | — | 1.6 A | — | — | — |
| Self Resonance Frequency | — | — | 117 MHz | — | — | — |
| Shape/Size Description | — | — | RECTANGULAR PACKAGE | — | — | — |
| Shielded | — | — | YES | — | — | — |
| Terminal Placement | — | — | DUAL ENDED | — | — | — |
| Test Frequency | — | — | 1 MHz | — | — | — |
| Has ADC | — | — | — | YES | — | YES |
| Bit Size | — | — | — | 32 | — | 16 |
| Boundary Scan | — | — | — | YES | — | YES |
| CPU Family | — | — | — | CORTEX-M4 | — | MSP430 |
| Clock Frequency-Max | — | — | — | 32 MHz | — | 16 MHz |
| DAC Channels | — | — | — | YES | — | NO |
| DMA Channels | — | — | — | YES | — | NO |
| Format | — | — | — | FLOATING POINT | — | FIXED POINT |
| Integrated Cache | — | — | — | NO | — | NO |
| JESD-30 Code | — | — | — | S-PQFP-G64 | S-PQCC-N20 | R-PDSO-G28 |
| Low Power Mode | — | — | — | YES | — | YES |
| Number of DMA Channels | — | — | — | 7 | — | — |
| Number of External Interrupts | — | — | — | 2 | — | — |
| Number of I/O Lines | — | — | — | 51 | — | 24 |
| Number of Timers | — | — | — | 7 | — | 2 |
| On Chip Data RAM Width | — | — | — | 8 | — | 8 |
| On Chip Program ROM Width | — | — | — | 8 | — | 8 |
| PWM Channels | — | — | — | YES | — | YES |
| Package Body Material | — | — | — | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY |
| Package Equivalence Code | — | — | — | QFP64,.47SQ,20 | LCC20,.12SQ,16 | TSSOP28,.25 |
| Package Shape | — | — | — | SQUARE | SQUARE | RECTANGULAR |
| Peak Reflow Temperature (Cel) | — | — | — | NOT SPECIFIED | — | 260 |
| RAM (bytes) | — | — | — | 16384 | — | 512 |
| ROM (words) | — | — | — | 65536 | — | 8192 |
| ROM Programmability | — | — | — | FLASH | — | FLASH |
| Speed | — | — | — | 72 MHz | — | 16 MHz |
| Supply Current-Max | — | — | — | 50.1 mA | 2.5 mA | — |
| Supply Voltage-Max | — | — | — | 3.6 V | — | 3.6 V |
| Supply Voltage-Min | — | — | — | 3.3 V | — | 3.3 V |
| Supply Voltage-Nom | — | — | — | 3.3 V | 3.3 V | 3.3 V |
| Temperature Grade | — | — | — | INDUSTRIAL | AUTOMOTIVE | INDUSTRIAL |
| Terminal Form | — | — | — | GULL WING | NO LEAD | GULL WING |
| Terminal Pitch | — | — | — | 0.5 mm | 0.4 mm | 0.65 mm |
| Terminal Position | — | — | — | QUAD | QUAD | DUAL |
| Time@Peak Reflow Temperature-Max (s) | — | — | — | NOT SPECIFIED | — | 30 |
| uPs/uCs/Peripheral ICs Type | — | — | — | MICROCONTROLLER, RISC | — | MICROCONTROLLER, RISC |
| ## STM32F302R8T6TR Alternates Showing results | — | — | — | Image | — | — |
| Manufacturer Package Code | — | — | — | — | UQFN-20 | — |
| Analog Input Voltage-Max | — | — | — | — | 3.6 V | — |
| Analog Input Voltage-Min | — | — | — | — | -3.6 V | — |
| Converter Type | — | — | — | — | ADC, DELTA-SIGMA | — |
| JESD-609 Code | — | — | — | — | e3 | e4 |
| Linearity Error-Max (EL) | — | — | — | — | 0.0032% | — |
| Number of Analog In Channels | — | — | — | — | 8 | — |
| Number of Bits | — | — | — | — | 16 | — |
| Output Bit Code | — | — | — | — | 2'S COMPLEMENT BINARY | — |
| Output Format | — | — | — | — | SERIAL | — |
| Sample Rate | — | — | — | — | 0.1536 MHz | — |
| Sample and Hold / Track and Hold | — | — | — | — | SAMPLE | — |
| Number of Serial I/Os | — | — | — | — | — | 1 |
| Qualification Status | — | — | — | — | — | Not Qualified |
| RAM (words) | — | — | — | — | — | 0.5 |
| ## MSP430F2132IPW Alternates Showing results | — | — | — | — | — | Image |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 5 alternatives for DLM11SN450HZ2L — response within 24 hours.
Quick Links
suggested
suggested
suggested
suggested
suggested
Why Look for Alternatives?
Finding alternatives for DLM11SN450HZ2L is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating DLM11SN450HZ2L replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for DLM11SN450HZ2L. Get expert recommendations within 24 hours.
FAQ
What is equivalent to DLM11SN450HZ2L?
Known equivalents for DLM11SN450HZ2L include CRCW040268K0FKED, XPL2010-102MLB, STM32F302R8T6TR. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of DLM11SN450HZ2L?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify DLM11SN450HZ2L alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.