CRCW1206270RJNEA Vishay Resistor (Resistor Chip) In Stock

Vishay CRCW1206270RJNEA is a 1206 thick-film chip resistor rated 270 ohm with ±5% tolerance and 0.25W power dissipation. Suitable for current sensing, pull-up, and general signal conditioning in SMT assemblies. Available in volume quantities with worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
CRCW1206270RJNEAResistor Chip
Quick Facts
Manufacturer
Vishay
Package
Resistor Chip
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0035(MOQ 1)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of CRCW1206270RJNEA?

  • 270 ohm resistance with ±5% (J) tolerance in a 1206 (3.2 × 1.6 mm) SMT package rated for 0.25W power dissipation
  • 200V AC rated voltage and thick-film construction ensuring stable performance in high-voltage signal conditioning circuits
  • RoHS and REACH compliant with lead-free termination, suitable for consumer, industrial, and automotive PCB assemblies

What is CRCW1206270RJNEA used for?

The CRCW1206270RJNEA is widely used as a pull-up or pull-down resistor on digital logic lines operating from 3.3V to 5V, where the 270 ohm value limits LED drive current to approximately 12 mA from a 3.3V supply. It also serves in voltage dividers, current-limiting networks for indicator LEDs, and base-drive resistors in BJT switching circuits. The 0.25W rating and 1206 footprint suit industrial control boards, power supply housings, and test equipment that require robust resistor assembly.

What are the specifications of CRCW1206270RJNEA?

Pbfree CodeYes
Reach Compliance CodeCompliant
YTEOL12
Additional FeatureRATED AC VOLTAGE (V): 200
ConstructionRectangular
Mounting FeatureSURFACE MOUNT
Package Height0.55mm
Package Length3.2mm
Package StyleSMT
Package Width1.6mm
Packing MethodTR, Paper, 7 Inch
Rated Power Dissipation (P)0.25W
Rated Temperature70°C
Reference StandardAEC-Q200
Resistance270Ω
Resistor TypeFIXED RESISTOR
Size Code1206
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Terminal FinishMatte Tin (Sn) - with Nickel (Ni) barrier
Terminal ShapeWRAPAROUND
Tolerance5%
Working Voltage200V
PackageResistor Chip

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginIsrael, Taiwan

Where can I find the CRCW1206270RJNEA datasheet?

CRCW1206270RJNEA Datasheet Download

Official datasheet from Vishay

What are equivalent replacements for CRCW1206270RJNEA?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What power rating and resistance value does the CRCW1206270RJNEA provide?

The CRCW1206270RJNEA offers 270 ohm resistance with ±5% tolerance and a 0.25W continuous power rating at 70°C ambient. Above 70°C the power must be derated linearly to 0W at 155°C, so designers should verify the PCB thermal environment when using this resistor near heat sources in enclosed enclosures.

How does the 1206 package size of CRCW1206270RJNEA compare to a 0805 resistor in terms of heat dissipation?

The 1206 package (3.2 × 1.6 mm body) dissipates 0.25W continuously, whereas a comparable 0805 resistor is typically limited to 0.125W. When the circuit requires more than 100 mA through the 270 ohm resistor — producing over 2.7W — the 1206 still requires external thermal management, but its larger pad area improves heat spreading to the PCB copper compared to a 0805 footprint.

Is CRCW1206270RJNEA appropriate for LED current limiting from a 5V supply?

Yes, at 5V supply with a forward-biased red or green LED dropping approximately 2.0V, the CRCW1206270RJNEA limits current to roughly 11 mA — calculated as (5V - 2V) / 270 ohm. This keeps the LED below its typical 20 mA maximum rating while dissipating only about 33 mW, well within the 0.25W power budget of the 1206 resistor.

Does CRCW1206270RJNEA meet RoHS requirements, and what AC voltage is it rated for?

Yes, the CRCW1206270RJNEA carries a lead-free RoHS-compliant termination finish (Pbfree Code: Yes) and meets REACH compliance standards. It is rated for 200V AC working voltage, allowing use in mixed AC/DC signal conditioning circuits such as voltage clamping networks and optocoupler input resistors in industrial equipment operating from 100V to 120V AC mains.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Vishay

Vishay is a leading electronic component manufacturer. FindMyChip sources Vishay ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0035
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$0.0190$0.02
500+$0.0172$8.60
1000+$0.0150$14.96
2500+$0.0066$16.50
5000+$0.0044$22.00
20000+$0.0035$70.00
pcs
Unit price: $0.0190 · Total: $0.02

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea