CRCW06031M33FKEA Vishay Resistor (Resistor Chip) In Stock

Vishay CRCW06031M33FKEA is a thick-film surface-mount resistor with 1.33 MΩ resistance, ±1% tolerance, and 1/10 W (100 mW) power rating in a compact 0603 (1.55x0.8 mm) SMD package rated for 75 V AC. RoHS compliant and available from stock with worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
CRCW06031M33FKEAResistor Chip
Quick Facts
Manufacturer
Vishay
Package
Resistor Chip
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • 1.33 MΩ resistance with ±1% (F) tolerance enables precise voltage divider and pull-up network designs
  • 75 V AC working voltage supports use in higher-voltage sensing and signal conditioning circuits
  • 1/10 W (100 mW) rated power in the compact 0603 package suits low-power microcontroller peripheral circuits
  • Thick-film construction delivers stable resistance with low temperature coefficient for reliable long-term performance
  • RoHS compliant and REACH compliant for use in environmentally regulated consumer and industrial products

Applications

The CRCW06031M33FKEA is used in high-impedance voltage divider networks for ADC input scaling in industrial sensors and measurement instruments, where the 1.33 MΩ value limits bias current to nanoampere levels. Its 75 V AC rating allows direct use in resistive sensing front-ends on 48 V industrial buses with appropriate protection circuitry. Microcontroller GPIO pull-up and pull-down networks also employ this resistor where ultra-low standby current consumption is required in battery-powered devices.

Specifications

Pbfree CodeYes
Reach Compliance CodeCompliant
Factory Lead Time11Weeks
YTEOL12
Additional FeatureRATED AC VOLTAGE (V): 75
ConstructionRectangular
Mounting FeatureSURFACE MOUNT
Package Height0.45mm
Package Length1.55mm
Package StyleSMT
Package Width0.85mm
Packing MethodTR, Paper, 7 Inch
Rated Power Dissipation (P)0.1W
Rated Temperature70°C
Reference StandardAEC-Q200
Resistance1330000Ω
Resistor TypeFIXED RESISTOR
Size Code0603
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Terminal FinishMatte Tin (Sn) - with Nickel (Ni) barrier
Terminal ShapeWRAPAROUND
Tolerance1%
Working Voltage75V
PackageResistor Chip

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginIsrael, Taiwan

Datasheet

CRCW06031M33FKEA Datasheet Download

Official datasheet from Vishay

Alternate & Equivalent Parts

Compatible alternatives and drop-in replacements for CRCW06031M33FKEA:

Frequently Asked Questions

What resistance and tolerance does the Vishay CRCW06031M33FKEA offer, and how does that fit precision voltage dividers?

The CRCW06031M33FKEA provides 1.33 MΩ with ±1% tolerance, meaning the actual resistance falls between 1.3167 MΩ and 1.3433 MΩ. In a voltage divider with a matched 1 MΩ lower leg, ±1% tolerance on both resistors contributes at most a ±2% error to the divided output, which is acceptable for 8-bit ADC inputs and compatible with standard 1% resistor divider practice in analog front-end design.

What power and voltage rating does the CRCW06031M33FKEA carry, and what circuit conditions could exceed these limits?

The CRCW06031M33FKEA is rated at 1/10 W (100 mW) continuous power and 75 V AC working voltage. Applying the full 75 V across 1.33 MΩ dissipates approximately 4.2 mW, well within the 100 mW limit, so voltage is the binding constraint in high-rail applications. Exceeding 75 V risks dielectric breakdown of the thick-film substrate; designers should derate to 50 V for long-term reliability in industrial 48 V DC systems with transient spikes.

What SMT package does the CRCW06031M33FKEA use, and is it compatible with standard pick-and-place assembly?

The CRCW06031M33FKEA is housed in the 0603 (1.55x0.8 mm, 0.45 mm height) SMT package, which is one of the most widely supported sizes in automated pick-and-place and reflow soldering lines. Its rectangular body fits standard 0603 land patterns with 0.9 mm pad length, and the low 0.45 mm profile suits designs with tight vertical clearance under RF shields or stacked PCB assemblies.

How does the CRCW06031M33FKEA compare to a 0402 1.33 MΩ resistor when choosing between size and manufacturability?

The 0603 CRCW06031M33FKEA (1.55x0.8 mm) is roughly twice the footprint of an 0402 equivalent but offers easier handling and lower tombstoning risk during reflow, especially in prototype or low-volume production runs. The 100 mW power rating in 0603 also exceeds the typical 62.5 mW or 50 mW rating of 0402 alternatives, giving extra thermal margin if the 1.33 MΩ resistor sees occasional current surges in ESD-protection or ADC bias networks.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Vishay

Vishay is a leading electronic component manufacturer. FindMyChip sources Vishay ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea