CDCV304PWRG4 Texas Instruments clock-timing (TSSOP-8) In Stock
CDCV304PWRG4 is a 1-to-4 LVCMOS clock buffer with low jitter and 200MHz max frequency, TSSOP-8. From $0.35 at 855+pcs. In stock, ships globally.
- Manufacturer
- Texas Instruments
- Package
- TSSOP-8
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- CDCV304PWRG4 Datasheet PDF
- Category
- clock-timing
- Price
- From $0.3510(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of CDCV304PWRG4?
- 1-to-4 clock distribution with matched outputs
- Low additive jitter: 25ps RMS typical
- Output frequency: DC to 200MHz
- LVCMOS compatible inputs and outputs
- Single 3.3V supply with OE pin
What is CDCV304PWRG4 used for?
Used for clock fanout in FPGA systems, processor clock distribution, ADC/DAC synchronization, and multi-board clock trees where a single oscillator must drive multiple loads with minimal skew.
Compliance & Regulatory
| RoHS Status | Compliant |
Where can I find the CDCV304PWRG4 datasheet?
CDCV304PWRG4 Datasheet DownloadOfficial datasheet from Texas Instruments
What are equivalent replacements for CDCV304PWRG4?
Compatible alternatives and drop-in replacements for CDCV304PWRG4:
Frequently Asked Questions
What is the maximum frequency of CDCV304?
CDCV304 supports clock frequencies from DC to 200MHz with all four outputs active. The low additive jitter of 25ps RMS ensures clean clock edges even at maximum frequency, suitable for high-speed FPGA and processor clocking.
How many outputs does CDCV304 provide?
CDCV304 provides four identical LVCMOS clock outputs from a single input. All outputs are matched for minimal skew (<250ps typical) and can each drive a 15pF load. The OE (output enable) pin can disable all outputs simultaneously.
What input types does CDCV304 accept?
CDCV304 accepts LVCMOS input at 3.3V levels. For LVPECL or LVDS clock sources, an external AC-coupling capacitor and bias resistors are needed. Crystal oscillator outputs connect directly to the input.
Is CDCV304 suitable for data converter clocking?
Yes, the low 25ps jitter makes CDCV304 suitable for clocking ADCs and DACs up to 14-bit resolution. For higher-resolution converters (16-bit+), consider TI's CDCE series with even lower jitter and PLL capability.
Related Guides
LMG1020YFFR Gate-Driver Board Design and Validation Guide
Design an LMG1020YFFR gate-driver board with controlled gate loops, local power delivery, probing, and staged validation.
Nov 3, 2026
How to Choose a Thyristor Surge Protector: TISP4015L1BJR-S Selection Guide
Compare three Bourns TISP candidates by protection window, package, documentation, and procurement requirements before requesting an exact-part quote.
Nov 3, 2026
How to Choose a CAN Transceiver Around MCP2551-E/SN: Selection and Procurement Guide
Compare MCP2551-E/SN maintenance sourcing with CAN transceiver migration options, logic compatibility, package codes, and lifecycle checks.
Nov 2, 2026
TISP4015L1BJR-S Design Guide for Surge Protection
Design a TISP4015L1BJR-S surge protection circuit with coordinated voltage limits, current paths, recovery checks, and bench validation.
Nov 2, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
More from Texas Instruments
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $3.5200 | $3.52 |
| 530+ | $0.3795 | $201.13 |
| 685+ | $0.3653 | $250.23 |
| 855+ | $0.3510 | $300.10 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”