BQ4802YPWG4 Texas Instruments Integrated Circuit (Small Outline Packages) In Stock

Real-time clock IC with 16-byte battery-backed SRAM, 8-bit parallel interface, and 32.768 kHz oscillator for accurate timekeeping. Supports interrupt output, direct-address bus access, and operates in a 28-pin TSSOP package. Available from Texas Instruments with worldwide distribution.

OBSOLETEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
BQ4802YPWG4Small Outline Packages
Quick Facts
Manufacturer
Texas Instruments
Package
Small Outline Packages
Pin Count
28
Lifecycle
OBSOLETE
Category
Integrated Circuit
Temp Range
?°C to 70.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of BQ4802YPWG4?

  • Real-time clock with 16 bytes battery-backed SRAM retains time and data through power interruptions without external NVRAM
  • 8-bit parallel direct-address interface at up to 32 kHz clock allows straightforward integration with microcontrollers and legacy bus architectures
  • Interrupt output capability enables alarm-triggered wake-up, reducing microcontroller active time and system power consumption
  • 28-pin TSSOP (0.25-inch pitch) plastic package provides compact footprint suitable for space-constrained embedded boards

What is BQ4802YPWG4 used for?

BQ4802YPWG4 is designed for embedded systems that require persistent timekeeping across power cycles, such as industrial controllers, medical instruments, and data loggers. The parallel bus interface allows direct memory-mapped access from 8-bit microcontrollers and DSPs without additional serial protocol overhead. The integrated battery-backed SRAM also stores small configuration tables or calibration constants that must survive main-supply interruptions.

What are the specifications of BQ4802YPWG4?

YTEOL0
Clock Frequency-Max0.032MHz
External Data Bus Width8
Information Access MethodPARALLEL, DIRECT ADDRESS
Interrupt CapabilityY
JESD-30 CodeR-PDSO-G28
JESD-609 Codee4
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSSOP28,.25
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Supply Current-Max9mA
Supply Voltage-Max5.5V
Supply Voltage-Min4.5V
Supply Voltage-Nom5V
Surface MountYES
TechnologyCMOS
Temperature GradeCOMMERCIAL
Terminal FinishNICKEL PALLADIUM GOLD
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Time-MinSECONDS
Time@Peak Reflow Temperature-Max (s)30
VolatileNO
uPs/uCs/Peripheral ICs TypeTIMER, REAL TIME CLOCK
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.60

Where can I find the BQ4802YPWG4 datasheet?

BQ4802YPWG4 Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for BQ4802YPWG4?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How much non-volatile storage does BQ4802YPWG4 provide alongside its real-time clock function?

BQ4802YPWG4 integrates 16 bytes of battery-backed SRAM that retains data and timekeeping registers when main power is removed. While modest, these 16 bytes are sufficient to hold alarm registers, calibration offsets, and small configuration parameters in embedded systems such as industrial PLCs or medical diagnostic devices without an external EEPROM.

What interface bus does BQ4802YPWG4 use and how does it connect to a typical 8-bit microcontroller?

BQ4802YPWG4 uses an 8-bit parallel direct-address bus, making it compatible with microcontrollers that feature an external memory bus or GPIO-emulated parallel interface. The device is accessed like static RAM with separate address and data lines, operating at up to 32 kHz, which simplifies firmware since no serial protocol stack is required and register reads take a single bus cycle.

In a data-logger design, how does the interrupt output of BQ4802YPWG4 reduce system power consumption?

The interrupt output of BQ4802YPWG4 can be programmed to fire at periodic intervals or specific alarm times, allowing the host microcontroller to remain in deep-sleep mode between logging events. Rather than polling a software timer at 1-second intervals, the host wakes only on the RTC interrupt, which can extend battery life by orders of magnitude in systems sampling at 1-minute or longer intervals.

How does the 28-pin TSSOP package of BQ4802YPWG4 compare in board area to DIP alternatives for a compact embedded design?

The 28-pin TSSOP package (R-PDSO-G28, 0.25-inch lead pitch) occupies roughly 173 mm² compared to over 900 mm² for an equivalent 28-pin DIP package, making it more than 5× smaller in footprint. This compactness suits designs where PCB real estate is at a premium, such as handheld instruments, single-board computers, and medical wearables requiring integrated timekeeping.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India