AWHW 10G-0202-TAlternatives & Equivalent Parts
About AWHW 10G-0202-T
AWHW 10G-0202-T is a Connector component manufactured by ASSMANN WSW components GmbH. It comes in a Header, Shrouded - Straight PTH Box package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 2 alternatives for AWHW 10G-0202-T — response within 24 hours.
Specification Comparison
| Parameter | AWHW 10G-0202-TSource | AT24C04D-MAHM-T | OP284FSZ |
|---|---|---|---|
| Manufacturer | ASSMANN WSW components GmbH | Microchip | Analog Devices |
| Package Type | Header, Shrouded - Straight PTH Box | Small Outline No-lead | Small Outline Packages |
| Pin Count | 10 | 8 | 8 |
| Temperature Range | — | -40.0°C ~ 85.0°C | -40.0°C ~ 125.0°C |
| Price | $0.2700 | $0.1640 | $3.2143 |
| Stock | In Stock | In Stock | In Stock |
| Lifecycle | — | ACTIVE | ACTIVE |
| Electrical Parameters | |||
| Pbfree Code | — | Yes | No |
| Manufacturer Package Code | — | UDFN-8 | R-8 |
| Factory Lead Time | — | 16 Weeks | — |
| YTEOL | — | 14 | 10 |
| Additional Feature | — | 1.7V TO 3.6V @ 0.1MHz AND 1.7V TO 3.6V @ 0.4MHz | — |
| Clock Frequency-Max (fCLK) | — | 1 MHz | — |
| Data Polling | — | YES | — |
| Data Retention Time-Min | — | 100 | — |
| Endurance | — | 1000000 Write/Erase Cycles | — |
| I2C Control Byte | — | 1010DDXR | — |
| JESD-30 Code | — | R-PDSO-N8 | R-PDSO-G8 |
| JESD-609 Code | — | e4 | e3 |
| Memory Density | — | 4096 bit | — |
| Memory IC Type | — | EEPROM | — |
| Memory Width | — | 8 | — |
| Number of Functions | — | 1 | 2 |
| Number of Ports | — | 1 | — |
| Number of Words | — | 512 words | — |
| Number of Words Code | — | 512 | — |
| Operating Mode | — | SYNCHRONOUS | — |
| Organization | — | 512X8 | — |
| Output Characteristics | — | OPEN-DRAIN | — |
| Package Body Material | — | PLASTIC/EPOXY | PLASTIC/EPOXY |
| Package Equivalence Code | — | SOLCC8,.12,20 | SOP8,.25 |
| Package Shape | — | RECTANGULAR | RECTANGULAR |
| Package Style | — | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE | SMALL OUTLINE |
| Page Size | — | 16 words | — |
| Parallel/Serial | — | SERIAL | — |
| Peak Reflow Temperature (Cel) | — | 260 | 260 |
| Programming Voltage | — | 3 V | — |
| Qualification Status | — | Not Qualified | Not Qualified |
| Serial Bus Type | — | I2C | — |
| Standby Current-Max | — | 8e-7 A | — |
| Supply Current-Max | — | 0.001 mA | 4.5 mA |
| Supply Voltage-Max (Vsup) | — | 3.6 V | — |
| Supply Voltage-Min (Vsup) | — | 2.5 V | — |
| Supply Voltage-Nom (Vsup) | — | 3 V | 15 V |
| Surface Mount | — | YES | YES |
| Technology | — | CMOS | BIPOLAR |
| Temperature Grade | — | INDUSTRIAL | AUTOMOTIVE |
| Terminal Finish | — | Nickel/Palladium/Gold (Ni/Pd/Au) | Matte Tin (Sn) - annealed |
| Terminal Form | — | NO LEAD | GULL WING |
| Terminal Pitch | — | 0.5 mm | 1.27 mm |
| Terminal Position | — | DUAL | DUAL |
| Time@Peak Reflow Temperature-Max (s) | — | 40 | 30 |
| Write Cycle Time-Max (tWC) | — | 5 ms | — |
| Write Protection | — | HARDWARE | — |
| Amplifier Type | — | — | OPERATIONAL AMPLIFIER |
| Architecture | — | — | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | — | — | 0.575 µA |
| Bias Current-Max (IIB) @25C | — | — | 0.45 µA |
| Common-mode Reject Ratio-Min | — | — | 86 dB |
| Common-mode Reject Ratio-Nom | — | — | 90 dB |
| Frequency Compensation | — | — | YES |
| Input Offset Voltage-Max | — | — | 375 µV |
| Low-Bias | — | — | NO |
| Low-Offset | — | — | YES |
| Micropower | — | — | NO |
| Neg Supply Voltage Limit-Max | — | — | -18 V |
| Neg Supply Voltage-Nom (Vsup) | — | — | -15 V |
| Power | — | — | NO |
| Programmable Power | — | — | NO |
| Slew Rate-Min | — | — | 2.4 V/us |
| Slew Rate-Nom | — | — | 4 V/us |
| Supply Voltage Limit-Max | — | — | 18 V |
| Unity Gain BW-Nom | — | — | 4250 |
| Voltage Gain-Min | — | — | 75000 |
| Wideband | — | — | NO |
| ## OP284FSZ Alternates Showing results | — | — | Image |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 2 alternatives for AWHW 10G-0202-T — response within 24 hours.
Quick Links
suggested
Why Look for Alternatives?
Finding alternatives for AWHW 10G-0202-T is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating AWHW 10G-0202-T replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for AWHW 10G-0202-T. Get expert recommendations within 24 hours.
FAQ
What is equivalent to AWHW 10G-0202-T?
Known equivalents for AWHW 10G-0202-T include AT24C04D-MAHM-T, OP284FSZ. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of AWHW 10G-0202-T?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify AWHW 10G-0202-T alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.