ATSAME51G18A-MUT-EFP Microchip Integrated Circuit (Quad Flat No-Lead) In Stock

ATSAME51G18A-MUT-EFP is a 32-bit ARM Cortex-M4F microcontroller by Microchip with 256 KB flash, 120 MHz CPU, CAN, and hardware FPU in a 48-pin VQFN package. Key specs: 12-bit ADC, DAC, DMA, USB, operating below -20°C. Available from stock with worldwide shipping.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
ATSAME51G18A-MUT-EFPQuad Flat No-Lead
Quick Facts
Manufacturer
Microchip
Package
Quad Flat No-Lead
Pin Count
48
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $4.1300(MOQ 100)
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • ARM Cortex-M4F core at up to 120 MHz with single-precision FPU for DSP-intensive motor control and signal processing
  • 256 KB flash with hardware CAN interface for industrial automation and automotive prototype designs
  • Integrated 12-bit ADC, DAC, and DMA channels enabling multi-channel data acquisition without CPU overhead
  • 48-pin VQFN package with extended low-temperature operation below -20°C for harsh environment embedded systems

Applications

The ATSAME51G18A-MUT-EFP is suited for industrial motor controllers, IoT gateway nodes, and fieldbus-connected embedded systems where 32-bit compute, hardware CAN, and floating-point DSP are required in a compact form factor. Its Cortex-M4F core at 120 MHz with FPU handles real-time PID loops, FFT-based sensor fusion, and CAN protocol stacks simultaneously. The VQFN-48 package and extended low-temperature rating make it a strong candidate for outdoor industrial equipment and agricultural electronics requiring operation across wide temperature ranges.

Specifications

Manufacturer Package CodeVQFN-48
Factory Lead Time12Weeks
YTEOL18
Has ADCYES
Bit Size32
Boundary ScanNO
CPU FamilyCORTEX-M4F
Clock Frequency-Max48MHz
DAC ChannelsYES
DMA ChannelsYES
FormatFLOATING POINT
Integrated CacheYES
JESD-30 CodeS-XQCC-N48
JESD-609 Codee3
Low Power ModeYES
Number of DMA Channels32
Number of External Interrupts16
Number of I/O Lines37
Number of Timers13
On Chip Data RAM Width8
On Chip Program ROM Width8
PWM ChannelsYES
Package Body MaterialUNSPECIFIED
Package ShapeSQUARE
Package StyleCHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Peak Reflow Temperature (Cel)260
RAM (bytes)131072
RAM (words)131072
ROM (words)262144
ROM ProgrammabilityFLASH
Screening LevelISO/TS-16949
Speed120MHz
Supply Current-Max60mA
Supply Voltage-Max3.63V
Supply Voltage-Min1.71V
Supply Voltage-Nom3.3V
Surface MountYES
TechnologyCMOS
Temperature GradeINDUSTRIAL
Terminal FinishMatte Tin (Sn)
Terminal FormNO LEAD
Terminal Pitch0.5mm
Terminal PositionQUAD
Time@Peak Reflow Temperature-Max (s)30
uPs/uCs/Peripheral ICs TypeMICROCONTROLLER, RISC
PackageQuad Flat No-Lead

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCN5A992.C
HTS Code8542.31.00.01
Country of OriginTaiwan

Datasheet

ATSAME51G18A-MUT-EFP Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

Compatible alternatives and drop-in replacements for ATSAME51G18A-MUT-EFP:

ATSAME51G18A-MUTMicrochip Technology Inc

RISC Microcontroller, 32-Bit, FLASH, CORTEX-M4F CPU, 120MHz, CMOS

View Part →
ATSAME51G18A-MUMicrochip Technology Inc

CM4, QFN 48, 256KB Flash, USB,CAN, Indus.85C, Tray

View Part →
ATSAME51G19A-MUMicrochip Technology Inc

CM4, QFN 48, 512KB Flash, USB,CAN, Indus.85C, Tray

View Part →

Frequently Asked Questions

What is the clock frequency and flash size of the ATSAME51G18A-MUT-EFP, and how does it compare to the SAM E51 with 512 KB flash?

The ATSAME51G18A-MUT-EFP runs at up to 120 MHz with 256 KB flash and 64 KB SRAM. The SAM E51 family also offers 512 KB flash variants for applications requiring larger firmware or data buffers. For a motor controller with CAN stack, 256 KB is typically sufficient, while the 512 KB variant suits designs with TLS/HTTPS or complex file systems.

For a real-time motor control design, how does the Cortex-M4F FPU in the ATSAME51G18A-MUT-EFP reduce PID loop latency?

The single-precision FPU executes floating-point multiply-accumulate in 1 cycle compared to 10+ cycles for software emulation on cores without FPU. For a 10 kHz PID control loop using a 12-bit ADC sample, the FPU reduces per-loop computation from roughly 50 µs to under 5 µs at 120 MHz, freeing CPU bandwidth for CAN message handling and DMA data transfers.

Does the ATSAME51G18A-MUT-EFP support CAN FD or only classic CAN, and what is its maximum CAN bit rate?

The ATSAME51G18A-MUT-EFP integrates a CAN 2.0 B compatible controller supporting classic CAN at up to 1 Mbps. It does not natively support CAN FD data phase speeds above 1 Mbps. For designs requiring CAN FD at 2 Mbps to 8 Mbps, an external CAN FD transceiver paired with a software FD controller or a different SAM series MCU with CAN FD IP would be needed.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $4.1300
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
100+$4.7100$471.00
1000+$4.3400$4340.00
5000+$4.1300$20650.00
pcs
Unit price: $4.7100 · Total: $471.00

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.

TM
Thomas Mueller
Hardware Lead, SensorTech GmbH, Germany