ATSAM3X8CA-AUAlternatives & Equivalent Parts
About ATSAM3X8CA-AU
ATSAM3X8CA-AU is a Integrated Circuit component manufactured by Microchip. It comes in a Quad Flat Packages package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for ATSAM3X8CA-AU — response within 24 hours.
Specification Comparison
| Parameter | ATSAM3X8CA-AUSource | IR2104PBF | 502386-0870 | THS4509RGTT | TPS3808G01DBVT |
|---|---|---|---|---|---|
| Manufacturer | Microchip | Infineon | Molex | Texas Instruments | Texas Instruments |
| Package Type | Quad Flat Packages | Dual-In-Line Packages | Other | Quad Flat No-Lead | SOT23 (6-Pin) |
| Pin Count | 100 | 8 | 10 | 16 | 6 |
| Temperature Range | -40.0°C ~ 85.0°C | -40.0°C ~ 125.0°C | -40.0°C ~ 105.0°C | -40.0°C ~ 85.0°C | -40.0°C ~ 125.0°C |
| Price | $7.7500 | $1.3000 | $0.3186 | $2.4300 | $1.1398 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | ACTIVE | NOT RECOMMENDED | ACTIVE | ACTIVE | ACTIVE |
| Electrical Parameters | |||||
| Pbfree Code | Yes | — | Yes | Yes | Yes |
| Manufacturer Package Code | LQFP-100 | — | — | — | — |
| Factory Lead Time | 4 Weeks | — | 12 Weeks | — | — |
| YTEOL | 13 | 3 | 8.3 | 15 | 15 |
| Has ADC | YES | — | — | — | — |
| Address Bus Width | 24 | — | — | — | — |
| Bit Size | 32 | — | — | — | — |
| Boundary Scan | YES | — | — | — | — |
| CPU Family | CORTEX-M3 | — | — | — | — |
| Clock Frequency-Max | 20 MHz | — | — | — | — |
| DAC Channels | YES | — | — | — | — |
| DMA Channels | YES | — | — | — | — |
| External Data Bus Width | 16 | — | — | — | — |
| JESD-30 Code | S-PQFP-G100 | R-PDIP-T8 | — | S-PQCC-N16 | R-PDSO-G6 |
| JESD-609 Code | e3 | — | e3 | e4 | e4 |
| Number of I/O Lines | 63 | — | — | — | — |
| On Chip Program ROM Width | 8 | — | — | — | — |
| PWM Channels | YES | — | — | — | — |
| Package Body Material | PLASTIC/EPOXY | PLASTIC/EPOXY | — | PLASTIC/EPOXY | PLASTIC/EPOXY |
| Package Equivalence Code | QFP100,.63SQ | DIP8,.3 | — | LCC16,.14SQ,20 | TSOP6,.11,37 |
| Package Shape | SQUARE | RECTANGULAR | — | SQUARE | RECTANGULAR |
| Package Style | FLATPACK, LOW PROFILE, FINE PITCH | IN-LINE | — | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | SMALL OUTLINE, LOW PROFILE, SHRINK PITCH |
| Qualification Status | Not Qualified | Not Qualified | — | Not Qualified | Not Qualified |
| RAM (bytes) | 98304 | — | — | — | — |
| ROM (words) | 524288 | — | — | — | — |
| ROM Programmability | FLASH | — | — | — | — |
| Speed | 84 MHz | — | — | — | — |
| Supply Voltage-Max | 1.95 V | 20 V | — | — | — |
| Supply Voltage-Min | 1.8 V | 10 V | — | — | — |
| Supply Voltage-Nom | 1.8 V | 15 V | — | — | — |
| Surface Mount | YES | NO | — | YES | YES |
| Technology | CMOS | CMOS | — | BICMOS | — |
| Temperature Grade | INDUSTRIAL | AUTOMOTIVE | — | INDUSTRIAL | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) | — | — | Nickel/Palladium/Gold (Ni/Pd/Au) | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Form | GULL WING | THROUGH-HOLE | — | NO LEAD | GULL WING |
| Terminal Pitch | 0.5 mm | 2.54 mm | 1.25 mm | 0.5 mm | 0.95 mm |
| Terminal Position | QUAD | DUAL | — | QUAD | DUAL |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC | — | — | — | — |
| High Side Driver | — | YES | — | — | — |
| Input Characteristics | — | STANDARD | — | — | — |
| Interface IC Type | — | HALF BRIDGE BASED IGBT/MOSFET DRIVER | — | — | — |
| Number of Functions | — | 1 | — | 1 | 1 |
| Output Characteristics | — | PUSH-PULL | — | — | — |
| Output Peak Current Limit-Nom | — | 0.36 A | — | — | — |
| Output Polarity | — | TRUE | — | — | — |
| Peak Reflow Temperature (Cel) | — | NOT SPECIFIED | — | 260 | 260 |
| Supply Voltage1-Max | — | 620 V | — | — | — |
| Supply Voltage1-Min | — | 5 V | — | — | — |
| Supply Voltage1-Nom | — | 15 V | — | — | — |
| Time@Peak Reflow Temperature-Max (s) | — | NOT SPECIFIED | — | 30 | 30 |
| Turn-off Time | — | 0.22 µs | — | — | — |
| Turn-on Time | — | 0.82 µs | — | — | — |
| Reach Compliance Code | — | — | Compliant | — | — |
| Body Breadth | — | — | 0.218 inch | — | — |
| Body Depth | — | — | 0.324 inch | — | — |
| Body Length | — | — | 0.526 inch | — | — |
| Body/Shell Style | — | — | RECEPTACLE | — | — |
| Connector Type | — | — | BOARD CONNECTOR | — | — |
| Contact Finish Mating | — | — | NOT SPECIFIED | — | — |
| Contact Finish Termination | — | — | Tin (Sn) | — | — |
| Contact Gender | — | — | FEMALE | — | — |
| Contact Material | — | — | NOT SPECIFIED | — | — |
| Contact Pattern | — | — | RECTANGULAR | — | — |
| Contact Resistance | — | — | 20 mΩ | — | — |
| Contact Style | — | — | CENTRONIC | — | — |
| DIN Conformance | — | — | NO | — | — |
| Dielectric Withstanding Voltage | — | — | 500VAC V | — | — |
| Durability | — | — | 30 Cycles | — | — |
| Filter Feature | — | — | NO | — | — |
| IEC Conformance | — | — | NO | — | — |
| Insertion Force-Max | — | — | 29.4 N | — | — |
| Insulation Resistance | — | — | 100000000 Ω | — | — |
| Insulator Material | — | — | POLYETHYLENE | — | — |
| MIL Conformance | — | — | NO | — | — |
| Mating Contact Pitch | — | — | 0.049 inch | — | — |
| Mating Information | — | — | MULTIPLE MATING PARTS AVAILABLE | — | — |
| Mixed Contacts | — | — | NO | — | — |
| Mounting Option 1 | — | — | LOCKING | — | — |
| Mounting Style | — | — | RIGHT ANGLE | — | — |
| Mounting Type | — | — | BOARD | — | — |
| Number Of Connectors | — | — | ONE | — | — |
| Number Of PCB Rows | — | — | 1 | — | — |
| Number of Rows Loaded | — | — | 1 | — | — |
| Option | — | — | GENERAL PURPOSE | — | — |
| PCB Contact Pattern | — | — | RECTANGULAR | — | — |
| Plating Thickness | — | — | 40u inch | — | — |
| Rated Current (Signal) | — | — | 1 A | — | — |
| Reference Standard | — | — | UL | — | — |
| Termination Type | — | — | SURFACE MOUNT | — | — |
| Total Number of Contacts | — | — | 8 | — | — |
| UL Flammability Code | — | — | 94V-0 | — | — |
| Wire Size-Max | — | — | 28 AWG | — | — |
| Wire Size-Min | — | — | 26 AWG | — | — |
| Withdrawl Force-Min | — | — | 0.4 N | — | — |
| Amplifier Type | — | — | — | OPERATIONAL AMPLIFIER | — |
| Architecture | — | — | — | VOLTAGE-FEEDBACK | — |
| Average Bias Current-Max (IIB) | — | — | — | 18.5 µA | — |
| Bandwidth (3dB)-Nom | — | — | — | 275 MHz | — |
| Bias Current-Max (IIB) @25C | — | — | — | 15.5 µA | — |
| Common-mode Reject Ratio-Nom | — | — | — | 90 dB | — |
| Frequency Compensation | — | — | — | NO | — |
| Input Offset Voltage-Max | — | — | — | 4000 µV | — |
| Low-Bias | — | — | — | NO | — |
| Low-Offset | — | — | — | NO | — |
| Micropower | — | — | — | NO | — |
| Neg Supply Voltage Limit-Max | — | — | — | -3 V | — |
| Neg Supply Voltage-Nom (Vsup) | — | — | — | -2.5 V | — |
| Packing Method | — | — | — | TR | — |
| Power | — | — | — | NO | — |
| Programmable Power | — | — | — | NO | — |
| Slew Rate-Nom | — | — | — | 6600 V/us | — |
| Supply Current-Max | — | — | — | 37 mA | — |
| Supply Voltage Limit-Max | — | — | — | 3 V | — |
| Supply Voltage-Nom (Vsup) | — | — | — | 2.5 V | 3.3 V |
| Unity Gain BW-Nom | — | — | — | 3000000 | — |
| Wideband | — | — | — | YES | — |
| ## THS4509RGTT Alternates Showing results | — | — | — | Image | — |
| Additional Feature | — | — | — | — | BAT BUP SW:N;MNL RST:N;OV DET:N;PW FL IP:N;PW FL IO:N;PW FL OP:N;PRG RST DLY:Y;UV DET:N;WD:N;WWD:N |
| Adjustable Threshold | — | — | — | — | YES |
| Analog IC - Other Type | — | — | — | — | VOLTAGE SUPERVISOR/RESET IC |
| Number of Channels | — | — | — | — | 1 |
| Supply Current-Max (Isup) | — | — | — | — | 0.0057 mA |
| Supply Voltage-Max (Vsup) | — | — | — | — | 6.5 V |
| Supply Voltage-Min (Vsup) | — | — | — | — | 1.8 V |
| Threshold Voltage-Nom | — | — | — | — | +0.405V |
| ## TPS3808G01DBVT Alternates Showing results | — | — | — | — | Image |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for ATSAM3X8CA-AU — response within 24 hours.
Quick Links
Why Look for Alternatives?
Finding alternatives for ATSAM3X8CA-AU is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating ATSAM3X8CA-AU replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for ATSAM3X8CA-AU. Get expert recommendations within 24 hours.
FAQ
What is equivalent to ATSAM3X8CA-AU?
Known equivalents for ATSAM3X8CA-AU include IR2104PBF, 502386-0870, THS4509RGTT. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of ATSAM3X8CA-AU?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify ATSAM3X8CA-AU alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.